Features • 1-1/2 in (38.1 mm) end-porting • High flow – 100 gpm (378 lpm) in a compact, portable size • Fluid pressure to 120 psi (8.4 bar, 0.84 MPa) • Patented, high-reliability closed center air valve is online serviceable • Lube-free operation • Epoxy-coated air section • External controller for optional remote operation • Stainless steel center section for corrosive applications Typical Application • Moving fluids ranging from slow moving to very flowable • Evacuating food process mixing kettles • Transferring of ingredients from original containers to mixing tanks • Evacuating liquid concentrates from shipping tankers to holding vessels • Repackaging fluids from original containers to smaller receptacles Typical Fluids Handled • Concentrated fruit juice • Pizza paste • Wine • Oil • Jams & jellies • Pastes and starches • Corn syrup • Mineral oil • Lanolin alcohol • Glycol • Pudding • Chocolate

Model DLM-A Driving Mode servo motor Yield（pcs/min） 20-150 Operating direction Left or Right Conveyor Speed（m/min） ≤40 Labeling Accuracy ±1.0 mm Label material Adhesive sticker, opaque or transparent label The inner diameter of label roll 76 mm The outer diameter of label roll 350 mm(max) The suitable size of label Width 15-300 mm  length 15-300 mm The suitable size of labeling objects Can customized Printer use air 5kg/cm ² Voltage (In China) AC220V 50/60HZ Single phase (Can customized as client need)

Description FTE3 Series Belt Filter Press is an industrial machine , used for solid/liquid separation processes, particularly the sludge dewatering in the chemical industry, mining and wastewater treatment Belt filter presses are also used in the production of apple juice ,cider and winemaking. The process of filtration is primarily obtained by passing a pair of filtering cloths and belts through a system of rollers. Belt Filter Press takes a sludge or slurry as a feed, and separates it into a filterate and a solid cake Features FTE3 Belt filter Press 1. Main structure made of stainless steel. 2. Cylinder tensioning device. 9-segment press rollers 3. Open frame structure with stress heavy . 4. Integrated sludgedewatering system, continuous auto running; 5. Low Power consumption : power requirement and greenhouse gas emissions, even including washwater booster pumps, are typically 20% ~30% of other sludge dewatering unit . 6. Polymer rate : Offers the lowest possible polymer dosage rate. 7. Easy to control : The Belt Press filter is easy to control - operators can see the effect of the polymer and the process through the press. Even when enclosed, it is possible to open covers and observe when necessary. SFC Belt Filter Press mechanism 1. Sludge pump into the mixing reaction tank, sufficiently stir and fully mixed with the polymer solution from polymer dosing system. 2. Sludge is rapidly flocculate into large particles by the fine particles, and large-group flocs formed into the network structure, then flow into the gravity pre-dehydration thickener. 3. Most of the free water is released through the filter cloth of the gravity thickener . The effluent is collected by the filtrate tray and pre-separated from the solid sludge. 4. The pre-dewatered sludge is slid onto the upper filter belt and then transferred to the lower filter belt. Between the upper and lower filter belt, under the action of step-by-step pressure and shear force further dewatering sludge cake discharged. SFC Belt Filter Press Features Application Field

Specifications and Sizes: Aluminum skin thickness: 0.12mm-0.50mm Total panel thickness: 2mm-6mm Width:1000mm,1220mm(regular),1250mm,1300mm,1500mm,1550mm, 1575mm(maximum) Length: Up to 6500mm Standard size: 1220mm(Width) ×2440mm(Length) Non-standard sizes and special colors are available depending on customers’ offers Available Colors: We can produce all colors on all professional color cards Feature: High Mechanical Strength and Toughness/ Anti-fungus/ Both Rigid and Flexible/ Low and High Temperature Resistance/ Super Peel Strength/Superior Weathering Resistance/ Light Weight and Easy for Process/ Excellent Fire- Resistance Property/ Coating Evenness & Diversified Colors/ Easy for Maintenance/ Impact Resistance/ Quickly installed/ Excellent self-cleaning character Production Capability: 250000SQM/Month More Service: OEM, Samples free (samples will be sent in one day time) Details： Warranty: We offer 20 years guarantee for PVDF Coating ACP Surface Treatment: PVDF coating Aluminum Source: South West Aluminum Factory Painting Source: PPG&BECKER Payment Term: TT, LC at sight, D/P, Western Union, Paypal Certification： Greenbond has a complete strict quality assurance system, as well as successfully passed ISO 9001 and ISO 2001 certifications. Packing & Delivery Greenbond China muestra gratis panel compuesto de aluminio Packing Details : packed in bulks or wooden box,suitable for shipping container Delivery Details : It need about 25 days after receiving your deposit

Feature • Hexagon crimping type • Trigger Switch: Make ram advance by pressing it. Pressure can be hold when loose trigger switch • Manual Retraction Button: Dies can be retracted with ram by pressing retraction button for checking or adjusting during operation • Automatic Retraction Function: Dies automaitcally retract with ram once crimping is completed • Powerful Motor: ensure quick and efficient crimping • LED illuminates working area for easy operation • C-Shape 180 degree rotatable head for easy cable insertion and flexible operation in confined place • Automatic Motor Stop Function extremely save power • 18v Li-ion Battery with high capacity and require short charging time • Plastic Case Package for easy carrying case Parameters Model EMT-300C Crimping Capacity 16-300mm² Output 12T Ram Stroke 30mm Battery Voltage 18V Battery Capacity 3Ah Charging time 2 hours Size 380*77*340mm Weight 7.0kg Accessories 11 Dies, 2 Battery,1 shoulder strap, 1 Charger, 1 Plastic Case Application Our hydraulic tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Catalogue Download Feature • Machine includes rollers and collars of various size for use on different diameters of rebar. • Ideal for builders, contractors and manufacturers who require a simple to use, consistently accurate rebar bending machine onsite or in the shop. • Preset angle locks for repeating the same angle bend. The two slide-type angle selectors can be set to accurately bend any angle from 0- 180 degrees. two standard foot pedal control switch for hands-free bending • Eliminates injuries and worker fatigue caused by manual rebar bending. • Emergency stop and flush mounted star buttons are included for added safety. • Motor runs quietly (low noise) and is only on while bending is in progress, preventing unnecessary wear. Parameters Model RB-32 Bending Capacity Φ6 - 32mm Bending Angle 0°- 180° Voltage 220V/110V Wattage 3000w/2800w Machine size 600x580x470mm Weight 175kg Application Our tying machine mainly used for Building construction, steel plants, railroads, bridge construction, oil & gas etc.

Description Unit VMCL850 Travel X travel mm 850 Y travel mm 500 Z travel mm 510 Distance between spindle nose and worktable surface mm 150-660 Distance from table center to stand column surface mm 287-787 Worktable Table area mm 430*950 Max. loads kg 630 T-slot width mm 3×18H8X125 Spindle Max. spindle speed rpm 8000 Angle of spindle taper - BT-40 Feed rate X/Y/Z rapid speed m/min 32/32/32 Max. cutting feedrate m/min 10 Automatic Tool Changing System Mechanic hand tool magazine Qty. Of tools pcs 24 Tool changing time sec 1.55 Max. tool length mm 300 Max. tool diameter/adjacent without tool mm 80/150 Max. tool weight kg 8 Motor Spindle motor kw 7.5/11 X/Y/Z axis motor kw 1.8/1.8/3 Cooling pump motor w 0.37+0.55 Precision（SN precision according to standard GB/T18400.4-2010） Positioning accuracy mm 0.01 Repetitive positioning accuracy mm 0.005 Machine Dimension Overall height of machine mm 2570 Floor area（L×W） mm 2800×2660 Weight kg 6000 Power supply kw 22

super glue, glue 502, cyanoacrylate adhesive AB glue, gel glue, paint, space food, hair color dying cream, cosmetics, medical products and other similar products. 1.      Automatic tube clamping and sealing 3.      Automatic tube logo marking 5.      No tubes no fill and date printing 7.      As different material, we can also make sure no air inside products while filling. 9.      Can be customized for different tube and liquid This machine filling system is made for specially for aluminum tubes, easy clean and changes, it is a practical machine for aluminum and metal tube packaging, 24 hours runs none stops, hardly have machine break down once well adjusted. This machine is mechanical transmission, logo marking has only 0.3 degree error, normally in china market is 1 degree, you can choose how to fold your tubes by show your ideal pictures. This machine is guaranteed for one year and you can extent your guarantee easily by discuss with our sales. About the machine use problem, after the sales, 1.      how to connect the power 3.      how to maintain the machine and how often to do it Thank you for the reading this article, our machine lately export news

Item customized paper gift packaging box H.S. Code 4819100000 Material Kraft paper,Paper board, Art paper,Corrugated board,Coated paper, etc Size(L*W*H) Accept custom Color CMYK litho printing, Pantone color printing, Flexo printing and UV printing as your request Finish Processing Glossy/Matt Varnish, Glossy/Matt Lamination, Gold/Silver foil stamping, Spot UV, Embossed, etc. Usage Packaging, Shipping, etc. Samples fee Stock samples are free Lead time 5 working days for samples; 12 working days for mass production Advantage 100% manufactory with lots of advanced equipments QC Strict quality control under SGS, ISO9001 and Intertek. Certification BSCI, ISO9000/1400,BV TUV SGS FSC etc.

Characteristic Applied to various kinds of granules product .automatic measure , filling, sealing, labeling, code...etc.Automatic production line Applicable bottle material : PET, glass bottles, tin, etc. Applicable Product: all kinds of nuts, grain, candied fruit, canned fruit, etc. According to the specific request , Made for the customer.

Specification P6-16 Hole Diameter 6mm, Center to Center 16mm Surface Melamine / Woode Veneer / Painting / Fire resistance panel Core 1,MDF core, low formaldehyde with E1 standard 2,ECO core, which is low formaldehyde with E0 standard. 3,MGO core, which is high fire resistance level with A standard. 4,any required core materials could be replaced. Back Soundtex acoustic felt attached on the back of the panels. Noise Reduction Coefficient 0.7 Fireproof grade GB8624 2012 A / B1 Eco-protection grade E0 / E1 Installation aluminum keel and clips, wood frame, gun nail Certification BV,CE,SGS,ISO9001-2008 Test report Eco protction, sound absorption, flame retardant Model Type Specification NRC Punching Rate P316 M-K-3/8-16-15 0.8 3.5% PL316 M-K-3/8-16-15 0.8 3.4% P616 M-K-6/8-16-15 0.85 14% PL616 M-K-6/8-16-15 0.85 13.8% P916 M-K-9/8-16-15 0.9 32% PL916 M-K-9/8-16-15 0.9 31.8%

Mechanical Vapor Recompression Evaporator ( MVR Evaporation system) MVR Working principles MVR applied mechanical vapor recompression unit for compressing the secondary vapor so that recycle the secondary vapor completely in a closed-loop circulation system. As a result of the vapor compressor, temperature and pressure of the secondary vapor raised, the heat efficiency boosted. The effectiveness of live steam is equal to 30 effects of multiple effect evaporator. Thus reducing the demand for external live vapor and cooling resources, energy conservation and less pollution attained. Application Range Evaporator, separator, condenser, vacuum and discharging system, delivery pump, groundwork, PLC, electrical appliance and instruments, valves, pipelines etc. Features MVR energy conserving evaporator is the advanced evaporation technology in nowadays. It only consumes a few vapors in the first two hours of the evaporator operation, almost no vapor consumption after then. As a compressor provided with thermal energy, compared with the traditional evaporator, MVR evaporator got a low temperature-trip, which is good for feeding material quality and avoiding scale forming. Not required a condenser or required a very small condenser CIP cleaning system Evaporation temperature: 50-100 C, less effect on feeding material nature Energy consumption: Evaporating 1-ton water shall consume 15-27 degree power, while the material with low boiling point, the consumption shall be below 20 degrees.  About the energy consumption depends on local vapor and power cost. We suppose the vapor supply cost 180 RMB/T, electricity supply cost 0.7 RMB per degree. Evaporating one-ton water will conserve 0.23*180-20*0.7=27.4 RMB. If you evaporating 100Tons, the evaporator is supposed to run 330 days every year, 24hours per day, MVR will save 27.4*100*24*330=21700800 RMB. The energy conservation efficiency is 60% more than five-effect evaporator. Evaporator selection notice compared with electricity and vapor supply cost ahead of time. MVR invest more than multi-effect evaporator at the early stage, but the cost shall be covered after 300days service.