Latex Colored Cohesive Elastic Bandage 1. Non-woven Adhesive Elastic Bandage Easy to tear: It can be torn manually without scissors after binding and the section is tidy. 2. Self-adhesive property: The bandage can be self-adhesive on the surface, so it can’t adhere to skin and hairs, fixed with folder and tape, removed and adjusted frequently. 3. High elasticity: With elasticity≧200%, it can provide the adjustable tensioning force and support force for the binding part. 4. Non-woven Adhesive Elastic Bandage Patent technology: ZL00117267.0; ZL01132175.X; Warning: This product contains the natural rubber which may cause anaphylactic reaction. 5.Economical,self-adhering bandage that provides excellent porosity in a lightweight,comfortable bandage. 6. Controlled compression – will not constrict. 7. Provides protection, superior adhesion yet is easy to remove. 8. Sweat and water resistant with non-slip support. 9. Variety of colors, prints and sizes. Packaging Details:

The whole filling line will be with bottle sort machine , Servo motor controlled bottle Filling machine , capping machine and cap feeder ,labeling machine and so on . It is suitable for many products , such as honey , mayonnaise,cream ,grease and so on .

Colored Flexible Finger 1"*5yards Nonwoven Cohesive Bandage 1. Non-woven Adhesive Elastic Bandage Easy to tear: It can be torn manually without scissors after binding and the section is tidy. 2. Self-adhesive property: The bandage can be self-adhesive on the surface, so it can’t adhere to skin and hairs, fixed with folder and tape, removed and adjusted frequently. 3. High elasticity: With elasticity≧200%, it can provide the adjustable tensioning force and support force for the binding part. 4. Non-woven Adhesive Elastic Bandage Patent technology: ZL00117267.0; ZL01132175.X; Warning: This product contains the natural rubber which may cause anaphylactic reaction. 5.Economical,self-adhering bandage that provides excellent porosity in a lightweight,comfortable bandage. 6. Controlled compression – will not constrict. 7. Provides protection, superior adhesion yet is easy to remove. 8. Sweat and water resistant with non-slip support. 9. Variety of colors, prints and sizes. Packaging Details for 1"*5yards Nonwoven Cohesive Bandage

Tag: Cost Efficient  Updated Formula All Season use Shelf life 12 months Description: GF-series Item-L 750ML PU foam, which is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for cure. Product  Features: Easy to use. Bonds to and seals most popular construction materials, wood, concrete, plaster, plumbing etc. Durable airtight seal-stops air infiltration, drafts and energy loss. High insulating value-saves energy and money. How To Use: 1. Shake can well to make the foam ready for use. 2. Clean the substrate and spray some water on it.. 3. Screw foam dispenser on tightly and turn the can upside down. 4. Vertical fill the gaps from the bottom upwards. 5. Foam is tack-free (surface drying) in 8 to 10 minutes in temperatures +18°C and +25°C; Higher temperatures will result in faster setup time. 6. Remove unwanted cured foam by cutting it with knife. Well done!

Tag: Self-Extinguishable, High elastic foam, Dense cell structure, Shelf Life: 12 months Description: GF-Series Item-B2 750ML PU foam, Class B2. The foam dispenses from the aerosol can is moisture cured and draws humidity from the air for cure. It is an economical, convenient and effective method for installing Building Code compliant, fire blocking in wood frame residential construction. Product  Features: Easy to use. High insulating value-saves energy and money. How To Use: 1. Shake can well to make the foam ready for use. 2. Clean the substrate and spray some water on it.. 3. Screw foam dispenser on tightly and turn the can upside down. 4. Vertical fill the gaps from the bottom upwards. 5. Foam is tack-free (surface drying) in 8 to 10 minutes in temperatures +18°C and +25°C; Higher temperatures will result in faster setup time. 6. Remove unwanted cured foam by cutting it with knife. Well done!

119301  German Type Combination Plier    PP+TPR Handle  CR-V  OR  55# Carbon Steel Material Global Agents Wanted click for more info Size: 6" (160mm)  7" ( 180mm )  8"  ( 200mm ) Material: C45 / C55 / 50CrV Finishing: Polish / Sand Belt Fine Polish / Satin Nickel / Chrome / Satin Chrome/ Black Nickel / Black oxidized & ground Handle: Dipped Handle / Plastic Handle /  Bi-color TPR / PP handle Body: 40-50HRC Rivet: 28-50HRC Cutting Edg: 48-58HRC Customers Logo: Injection / Stamp / Printing / Sticker / Lasered / Electric Corrosion Package: Double Blisrer / Head Double Blister / Sliding Card / Paper Tie Card / Plastic Hanger / Flag label Sample Time: Existing Items   Sample time: 7- 10 days Delivery Time: Within 45-60 Days after Receiving the Deposit Payment Terms: T/T  ,L/C Item pcs/inner box pcs/ctn L(cm)/ctn W(cm)/ctn H(cm)/ctn G.W/ctn(kgs) N.W/ctn(kgs) 6" 6 60 46 20 31 16 14 7" 6 48 47 22 25 18 16 8" 6 48 47 22 25 18 16

Introduction PUR outer sheath anti-distortion welding cable as the power control and signal transmission, suitable for installation in torsion and bending stresses at the same time the existence of a variety of welding equipment, such as welding robots and manipulators, automatic gun, auto welding production line welding robot and robot connections and assembly, also suitable for connecting a rotary-type or lift table. Industrial Robot consists of three basic parts the body, drive system and control system. The body includes the base and implementing agencies, including the arm, wrist and hand. Drive system includes power plant and transmission mechanism for the actuator to produce a corresponding action. Control system is programmed in accordance with the input of the drive system and actuators sending a command signal to achieve signal control. Robot Cable Covers: Servo motor cable, Encoder cable, Signal control cable, Data cable bus and servers. Different from 2D drag chain cable, robot cable shows a higher performance. One hand, it requires the cable should have a high degree of anti-torsion ability to adapt equipment 3D motion. Another hand, the cable is completely exposed to the industrial field, welding sparks, cooling water, oil and other environmental factors is exist, so it should have the abilities to defend them. Currently, the robot cable is mainly used for automobile assembly and production, food processing, paper, beverages and other automated production lines. We can provide a full range of robot cable products, including servo motor cable, encoder cable, signal control cable, data cable bus and servers, besides we can also customize products according to your requests. Feature • Optimized product structure, with higher flexibility, minimum bend radius up to 7.5D; • Full range of products, include servo motor cable, encoder cable, signal control cable, data cable bus and servers; • Safe and reliable, robotic products provided by us have received simulation application environment tests to ensure product reliability; • Our offer cable insulation and jacketing materials used in robotics, mostly Self-developed materials have excellent performance: wear resistance, anti-torsion, chemical resistant etc.; • UL, CSA, VDE certificates on request; • In addition, we can also provide customized robot cable.

RV25 Diaphragm Pump Technical Specifications Max Working Pressure 120psi(0.84Mpa ,8.4bar) Max Flow Rate 40 gpm(150 lpm) Max Reciprocating Speed 276cpm Max Suction Height(Dry Sucking) 5.48m Max Permitted Grain 4mm Max.Air Consumption 45scfm(22.5L/s) Air Inlet size 1/2 in.npt(f) Air Outlet size 1/2 in.npt(f) Fluid Inlet size 1 in.npt Fluid Outlet size 1 in.npt(f) Weight Aluminum pump 8.2kg Stainless steel 15kg

Features • 2 in (50.8 mm) end-porting • Larger ports for more flow – up to 150 gpm (568 lpm) • Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa) • Patented, high-reliability closed center air valve is online serviceable • Lube-free operation • Epoxy-coated air section • External controller for optional remote operation Typical Application • Moving fluids ranging from very slow moving to very flowable • Evacuating food process mixing kettles • Transferring ingredients from original containers to mixing tanks • Evacuating liquid concentrates from shipping tankers to holding vessels Typical Fluids Handled • Concentrated fruit juice • Tomato paste • Wine • Oil • Jams & jellies • Pastes and starches • Corn syrup • Glycol • Thick sauce • Pudding • Chocolate • Fruit filling

Product use: In the paint,glue ,polyurethane coating automotive ,coating building coating ,oil transportation ,chemical food,pharmaceutical and other industries widely used ,is very suitable for viscous liquid ,corrosive liquid ,liquid containing solid particles or gas bubbles .A variety of materials ,adaptation of wide ,simple installation ,easy maintenance. Products advantages: 1.after close of polishing and surface treatment of stainless steel surface,without damaging the material chemical. 2.Can handle a variety of high viscosity fluid ,strong corrosion resistance. 3.Less maintenance parts ,in the true sense to reduce the maintenance cost. 4.High mechanical life.

Features • 1 in (25.4 mm) end-porting • High flow – 40 gpm (151 lpm) in a compact, portable size • Fluid pressure to 120 psi (8.4 bar, 0.84 MPa) • Epoxy-coated center section • External controller for optional remote operation Typical Applications • Drum fluid transfer • Unloading fluids • Transferring high temperature acids • Chemical evacuation • Tank and sump drainage • Circulating plating chemical tank Typical Fluids Handled • Chemicals • Acetic acid • Chromic acid • Hydrochloric acid • Hydrofluoric acid • Sulfuric acid • Nitric acid • Phosphoric acid

Remove the toughest of coatings, create control trench grooving or routing, scraping and striping with flat square edge finishes on concrete or asphalt surfaces.