It combines the advantages is wood and cement board: as light as the wood, as substantial as the cement, with the characters like sound-absorbing, shock resistance, fire resistance, waterproof, moisture&mildew protection, it can be widely used in sports stadiums theaters, cinema, conference room, churches, factories, schools, libraries, swimming pools and the offices,and has a good acoustic and decorative effect. The capacity and quality are the first manufacturer in the country.

Specification PL616 Hole Diameter 6mm, Center to Center 16mm Surface Melamine / Woode Veneer / Painting / Fire resistance panel Core 1,MDF core, low formaldehyde with E1 standard 2,ECO core, which is low formaldehyde with E0 standard. 3,MGO core, which is high fire resistance level with A standard. 4,any required core materials could be replaced. Back Soundtex acoustic felt attached on the back of the panels. Noise Reduction Coefficient 0.7 Fireproof grade GB8624 2012 A / B1 Eco-protection grade E0 / E1 Installation aluminum keel and clips, wood frame, gun nail Certification BV,CE,SGS,ISO9001-2008 Test report Eco protction, sound absorption, flame retardant Model Type Specification NRC Punching Rate P316 M-K-3/8-16-15 0.8 3.5% PL316 M-K-3/8-16-15 0.8 3.4% P616 M-K-6/8-16-15 0.85 14% PL616 M-K-6/8-16-15 0.85 13.8% P916 M-K-9/8-16-15 0.9 32% PL916 M-K-9/8-16-15 0.9 31.8%

Specification M-KT-8-56-20-15 Slot Width 56mm Surface Melamine / Woode Veneer / Painting / Fire resistance panel Core 1,MDF core, low formaldehyde with E1 standard 2,ECO core, which is low formaldehyde with E0 standard. 3,MGO core, which is high fire resistance level with A standard. 4,any required core materials could be replaced. Back Soundtex acoustic felt attached on the back of the panels. Noise Reduction Coefficient 0.7 Fireproof grade GB8624 2012 A / B1 Eco-protection grade E0 / E1 Installation aluminum keel and clips, wood frame, gun nail Certification BV,CE,SGS,ISO9001-2008 Test report Eco protction, sound absorption, flame retardant Model Type Specification NRC Punching Rate S30 M-KT-8-30-20-15 0.8 2.7% SL30 M-KT-8-30-20-15 0.8 2.7% S56 M-KT-8-56-20-15 0.85 2.8% SL56 M-KT-8-56-20-15 0.85 2.8% S100 M-KT-8-100-20-15 0.75 2.6% SL100 M-KT-8-100-20-15 0.75 2.6% S200 M-KT-8-200-20-15 0.8 2.5% SL200 M-KT-8-200-20-15 0.8 2.5%

Key Features > 1/1.7” 12MP SONY Starvis Back-illuminated Progressive CMOS > H.265&H.264 dual-stream encoding > 12MP 4000×3000@15fps, 8MP 3840×2160@25fps > 4K 3.6-11mm Motorized Lens > 4pcs array IR LEDs, 40-50m IR distance > DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC,ROI,Defog > 1/1 Audio in/out > Optional interfaces: 1*Alarm I/O, 1*Reset, 1*RS485, 1*CVBS output, SD card slot Max.128GB > Intelligence analysis: cross-border detection, regional invasion detection, left-behind Items detection,smart stream,smart detection, smart control,color abnormal, sound abnormal, brightness abnormal, video abnormal > Metal casing, IP66 waterproof

120102  Professional Diagonal Cutting Plier   Type, Flat Nose Plier  Size. 6" / 150mm    7" / 180mm Material   55# Carbon Steel or Chrome Vanadium Steel  Suface treatment. Polish Finish  / Nickel Finish Handle Material.:  PP+PVC Certificate.: GS  Customers Logo: Sticker / Laser Printing  Package: Plastic Hanger / PP card  Sample Time: 3 days Delivery Time: Within 35 Days after Receiving the Deposit Payment Terms: T/T  ,L/C

Disposable,Easy Care, Wrinkle-free, Hypo-allergenic

Copper Foil Welcome contact us for more details slm1@shleadingmetal.com Whatsapp number: 0086 17321007577

SLM copper tape. Welcome contact us for more details slm1@shleadingmetal.com Whatsapp number: 0086 17321007577

Outdoor project connects the feeder optical cable led out from the premise to the distribution optical cable led in the user’s building. The outdoor project involves such products as Fiber Distribution Cabinets, and Fiber Splice Closures. Fiber Distribution Cabinets can be selected depending on different ODN structures. It completes inlet and fixing of optical cables, splicing and termination of fibers and installation and management of optical splitter on an xPON access network and implements optical line splitting and capacity expansion. It can be used to install the optical splitter with different numbers of optical splitting ports. Fiber Splice Closures provide splice function between feeder cables and distribution cables. On the FTTx network, the fiber splice closures can also take over some functions of Fiber Distribution Cabinets. Fiber distribution cabinet Used for rapid network deployment this cabinet offers connection, distribution and dispatching of communication optical cables from the central office to each optical distribution node. It provides secure and reliable management of flexible fiber and optical cables. Features 1. High-quality steel sheet, surface plastic spray 2. Effective sealing performance, dust and splash proof: IP65 3. Single door, front operation 4. Modular structure, easy configuration 5. Rotary structure of optical patch panel 6. Available in FC, SC, ST, duplex LC adapters 7. Storage of the pigtails or fiber patch cords at the front 8. Perfect fiber route design to ensure bend radius of fibers 9. Reliable optical cable fixing, stripping protection and grounding Wall mount distribution box A indoor distribution system mainly adopted as a base station with base band unit (BBU) and radio remote unit (RRU). With the introduction of multiband RRU, indoor distribution systems need a large number of fiber resources. Sufficient fiber resources should be distributed and routed at one time in during the installation process. To meet the demands of various equipment interface from potential manufactures, pre-distributed multi-fibers should be terminated using the tower-mounted distribution box. It implements such functions as the inlet, fixation, and stripping protection for subscriber cables, splicing, protection, storage and management for optical fibers. It is used for connection from fiber to tower or from fiber to building, for connecting RRU and BBU. It is installed in the building or OSP near the antenna. Features 1. Pleasant appearance, easy installation single-mode double-fiber outside patch cord 2. Using bottom cable inlet locations, no interference among cables 3. Well designed structure and layout, convenient for routing and maintenance 4. Sealed enclosures protect fibers from rain and dust 5. Full front operation, single door 6. Termination using duplex LC adapter, mating with adapter at RRU end 7. Selective lower sealing assembly, compatible with outdoor connector and outdoor LC-type dual jumper fiber 8. Supporting wall-mounted or pole-mounted, adjustable range for pole-mounted is 60mm-120mm Fiber Splice Closure The optical fiber distribution box is applicable to connection and distribution management of optical cables. On the FTTx network, the fiber splice closure can also take over some functions of the optical cross connection cabinet and optical distribution box, and higher requirements are put forward for the number of inlet cables of the fiber splice closure. FTTC Outdoor Cabinet Feature 1. For FTTC application and can accommodate DSLAM, AG equipment 2. Single or several cabinets structure 3. Suit for base-mounted or overhead mounted FTTB Outdoor Cabinet Features 1. Provide broadband and voice service 2. Modular design with single or multi compartments to accommodate ONU equipment, batteries and voice & broadband blocks 3. Wall mounting or floor installation with plinth

Feature: Both IDC and wire wrap connection modules are available. The connection block is consisting of double side colorful terminals which make easy operation and maintenance. Operator could finish connection only by a screw drive. The body and pedestal are made of stainless steel or high quality cold rolling steel or Sheet Molding Compound (SMC).The life span is over 20 years for stainless steel body and SMC body, over 10 years for cold rolling steel body. The hinges are placed on both sides, providing enough space for operation when the doors are fully opened. Anti-drew design. Heat insulation material is incorporated into the cabinet to provide effective protection against dew. Operator could ease test the cabinet by outside testing pin. Technical feature: Insulation resistance: 50000M /500V(DC) Withstanding Voltage: 500V(50HzAC) 1 min without spark or arc. Terminal contact resistance:≤3M Contact resistance between reeds:≤20M Pulling force: 0.4mm>50N, 1.2mm>50N Connection durability: more than 1000 times

Digital Distribution Frame The modular device uses 75W coaxial connectors, which facilitate installation, operation and capacity expansion. The frame, made of aluminum profiles and connecting parts, is characterized by an open building block structure and concise design with cable-through rings equipped for easy cabling and jumping. The frame and supports rack are made of anodized aluminum profiles while the shielding cover of the coaxial connectors is specially treated with epoxy electrostatic spraying to boast beautiful appearance and powerful anti-corrosion capability. The terminal box of the coaxial connectors boasts excellent shielding capability and interchangeability to ensure the stability and reliability of major technical indices. High-end and low-end Distribution Units are welded through jumpers and can rotate by 1800 to facilitate cable welding. Open type Sealing type The frame is made from quality materials such as aluminum alloy, steel plate etc. The surface is treated by way of galvanization, oxidization, plastics coating etc. The structure is stable with pleasing appearance. Module structure is adopted for flexible and easy installation and deployment. Rotary structure is designed for each unit. The unit can be rotated downward freely for convenient cable connection and maintenance Enough wire hooking rings and support trays are provided for the frame for easy cable laying. The frame is equipped with perfect earth system The shield cover of coaxial connector is treated with epoxy static plastics spray with pleasing appearance and good performance of anti-erosion. The contact reed of module is treated with gold plating so as to ensure contact reliability and safety. Unit connection