This machine is full-automaticaIly controlled by PLC,the whole hydraulic transmission,drive hydraulic oil jar carry out and shear through centre pump station towards the hole,hydraulic pressure motor transmit power as main transmission,characteristic its reliable for to operate steadily by hydraullc pressure,Shear towards hole precision high,high output,low energy consumption,Section geometry form rule of the notch.Its hydraulic pressure trausmission,two sets of rectification correct and fit,the cut- off have a national patent. 1) Base of machine is processed by planning machine and the locating pin of screw connects wall of machine stand. Panel can be formed with straightness, which guarantees the high accuracy. 2) Adopts hydraulic interlaced cutting which makes sure of the exact geometrical profile of formed panel. This cutting method causes no waste material. 3) Computer for measuring the length, hydraulic punching for the long holes at both sides and round holes in the middle, the distance between holes can be adjusted. 4) Arranges with leveling unit of 7 rollers, which assures the levelness of Z purlin. 5) Material of roller adopts high-quality alloyed GCR15 6) Craft of heat treatment: forging — temper — anneal — normalizing — quenching -- temper 7)Sizes of product：width（a）：140, 160, 180, 200, 220, 240，250, 300                             height（b）：62, 77, 92 8)Diameter of roller shaft: ￠70㎜ 9) Length of production line: 20m 10) Forming speed: 0-18m/min 11) Quenching hardness of roller: HRC580-600 12) Quenching deepness of roller: 8mm 13) Thickness of steel coil: 2.0-3.0mm 14) Total motor power: 22kw 15)Power source：380V / 3 phases / 50Hz 16)Computer adopts PLC，Omron CPEE-N30DR according to customer 17) Computer operating board adopts Xinjie OP320A 18) Roller station: 15 stations 19) Decoiler type: umbrella type 20)Weight capacity of decoiler：5T

Material:Q235*1.5mm Process Technology:Laser cuttinging→stamping→bending→welding→painting

Product Introduction Product name 301 Hot Rolled Stainless Steel Coil Specification Thickness: Cold Rolled: 0.3-3mm Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310S, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% desipot) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% desipot or as your requirement Stock In stock Chemical Elements Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 201 0.12 0.75 7.00 0.045 0.045 1.00-1.28 13.70-15.70 202 0.15 1.00 2.25 0.045 0.045 4.07-4.17 14.00-16.00 301 0.15 1.00 2.00 0.045 0.03 6.00-8.00 16.00-18.00 302 0.15 1.00 2.00 0.045 0.03 8.00-10.00 17.00-19.00 304 0.035 0.75 2.00 0.045 0.03 8.00-13.00 18.00-20.00 309 0.15 0.75 2.00 0.045 0.03 12.00-15.00 22.00-24.00 309S 0.08 1.00 2.00 0.045 0.03 12.00-15.00 22.00-24.00 310S 0.08 1.50 2.00 0.045 0.03 19.00-22.00 24.00-26.00 316 0.08 1.00 2.00 0.045 0.03 10.00-14.00 16.00-18.00 316L 0.035 0.75 2.00 0.045 0.03 10.00-15.00 16.00-18.00 321 0.04-0.10 0.75 2.00 0.045 0.03 9.00-13.00 17.00-20.00 409 0.089 1.00 1.00 0.045 0.05 ≤0.06 10.50-11.75 410 0.15 0.75 1.00 0.045 0.03 ≤0.06 11.5-13.5 420 0.16-0.25 1.00 1.00 0.040 0.03 ≤0.06 12.00-14.00 430 0.12 0.75 1.00 0.045 0.03 ≤0.06 16.00-18.00 430A 0.06 0.05 0.05 0.030 0.50 ≤0.25 14.00-17.00 Physical proprety Grad YS (MPa) TS (MPa) Elongtion HRB Max 301 205 520 40 95

Product Introduction Product name 410S HR CR Stainless Steel Sheet Specification Thickness: Cold rolled: 0.3-3mm; Hot Rolled: 3-120mm Width: 0-2000mm Length: 0-6000mm Customized sizes are accepted Standard ASME, ASTM, EN, BS, GB, DIN, JIS, etc Finish NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish and so on Material 201, 202, 304, 304L, 310S, 316, 316L, 410, 420, 430, 441, 800H, 904L Brand Name TISCO, Baosteel, LISCO, JISCO Place of Origin Jiangsu of China (Mainland) Technical treatment Cold Rolled, Hot Rolled MOQ 1 Metric Ton Port of Loading Shanghai or as your requirement Terms of Delivery FOB, CFR, CIF, CNF, EXWORK Terms of Payment L/C, T/T (30% deposit) Packing Standard export sea-worthy packing Delivery time Within 7-15 days after recieve 30% deposit or as your requirement Stock In stock Chemical Element Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni≤ Cr 410S 0.08 1.00 1.00 0.04 0.03 0.06 11.5-13.5 Physical Proprety Grade YS (MPa) TS (MPa) Elongtion HRB 410S 205 410 20 88

Product Description Item 316 Seamless Stainless Steel Tube Grade 300 series, Grade 316 Brand Name TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc. Size Outside Diameter 6-630mm Wall Thickness 0.24-30mm Length Less Than 12 Meter Surface Finish Bared, Painted, Galvanized, With Oiled, 3 PE, FBE, corrosion resistant coating Ends Plain, Beveled, Thread with Coupling or cap Technique ERW,EFW DSAW Standard BS EN10296,BS EN10025,BS EN10297,BS6323, BSEN10219,BSEN10217,GB/T13793-1992,GB/T14291-2006, GB/T3091-1993,GB/T3092-1993,GB3640-88,ASTM A53/BS1387 MOQ 1 Metric TON Package Bundle, In Bulk, PE clothes,Clients' Requirements Terms of Delivery FOB,CFR,CIF,CNF,EXWORK Port of Shipment Shanghai Port,China Delivery Time According to the quantity and specification of each order Terms of Payment L/C ,T/T(30% deposit) Packing Standard export sea-worthy packing Stock In stock Chemical Composition Grade C ≤ Si ≤ Mn ≤ P ≤ S ≤ Ni Cr 316 0.03 1.00 2.00 0.045 0.03 12.0-15.0 16.0-18.0 Physical Property Grade YS (MPa) TS (MPa) Elongtion HRB 316 ≥170 ≥485 ≥30 ≤90

CO-60S Feature • Single action • Tools with Support frame and carry handles. • Applicable for copper, aluminum tube and wire clamps crimping. • Applicable for crimping steel standard wire in large cross section • Crimping cable lug dies: 400 500 630 800 1000mm² • Crimping steel standard wire: Die could be OEM • It is the lightest one in big ton crimper family. Dies upper parts are fixed which could be open by quick rotating. Then crimping formiddle tube or end tube. • To be worked with electric or gasoline pump • Dies could be OEM • Metal case package is for easy carrying and well tool protection Parameters Model CO-60S Terminal Type Cable Lug or Copper Tube Crimping Capacity 400 500 630 800 1000mm² Or OEM dies for steel standard wire Output 55 T Length 446 mm Weight 22 kg EHP-63A Feature • Single-Acting • Electrical controller for easy and safe operation • Operator can keep away from application during operation • Carrying handles for easy carrying with two handles • Quick coupler for easy pipe installation • Pressure gauge for safe operation • Monitor working pressure • Wood carton for well tool protection during delivery Parameters Model EHP-63A Rated Pressure 700 Bar Oil Reservoir 5000CC Oil Delivery Speed Low pressure 2.6cc/stroke High pressure: 0.32cc/stroke Working Pressure Low pressure 0-20bar High Pressure: 20-700bar Power 220V/50HZ Motor 0.75KW Size 350*270*490mm Weight 29 kg Application Ourhydraulic crimping tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Thickness 0.17-1.5 mm Width 500~1200 mm Length 1~10 meters color RAL cart or customized base  Material 1 electric galvanized steel 2 Hot dip galvanized steel 3 galvalume steel base  Material  coating Please contact us Paint PE/HDP/SMP/PVDF Corrugated type 40 corrugated types, please contact us slm3(at)shleadingmetal.com get the whole catalog. Customized Provide customized service as your requirement Thickness Tolerance(mm) +/-0.01 to +/-0.05

Thickness 0.17-1.5 mm Width 500~1200 mm Length 1~10 meters color RAL cart or customized base  Material 1 electric galvanized steel 2 Hot dip galvanized steel 3 galvalume steel base  Material  coating Please contact us Paint PE/HDP/SMP/PVDF Corrugated type 40 corrugated types, please contact us slm3(at)shleadingmetal.com get the whole catalog. Customized Provide customized service as your requirement Thickness Tolerance(mm) +/-0.01 to +/-0.05

Thickness 0.17-1.5 mm Width 500~1200 mm Length 1~10 meters color RAL cart or customized base  Material 1 electric galvanized steel 2 Hot dip galvanized steel 3 galvalume steel base  Material  coating Please contact us Paint PE/HDP/SMP/PVDF Corrugated type 40 corrugated types, please contact us slm3(at)shleadingmetal.com get the whole catalog. Customized Provide customized service as your requirement Thickness Tolerance(mm) +/-0.01 to +/-0.05

Thickness 0.17-1.5 mm Width 500~1200 mm Length 1~10 meters color RAL cart or customized base  Material 1 electric galvanized steel 2 Hot dip galvanized steel 3 galvalume steel base  Material  coating Please contact us Paint PE/HDP/SMP/PVDF Corrugated type 40 corrugated types, please contact us slm3(at)shleadingmetal.com get the whole catalog. Customized Provide customized service as your requirement Thickness Tolerance(mm) +/-0.01 to +/-0.05

Brief introduction: The bottle caps neatened by the cap neatening device ,the bottle caps with mouth up are carried to the caps collecting guideway, the bottles come from other equipment of the assembly line enter the caps collecting area. The bottles move ahead with clamping of the two sides clamping device then the caps match the bottles automatically. The cap pressing device presses the caps to the pre-tight situation before rotating the caps. Under the function of three pairs of high speed rotating wearable rubber wheels, the caps match with the bottles tightly. Main parameter: Bottle height Φ20-φ250mm Capping size Φ20mm～Φ130mm（the shute is customized） Conveying direction Left-right(or right-left) Capacity 30-50bottles/min Powder supply 220V 50-60Hz Power 1300W Weight 450kg Dimension 1500mm×1000mm×1800mm

Rechargeable LED Work Lamps with Bluetooth speaker