Products Features Capacity: 12~35kw. Efficiency: 2.7~3.3 cop. Warranty: Compressor- 3 years limited. other parts-1 year limited. Structure Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance toatmospheric agents. Direct expansion coils with condensate drain tray. Hermetic compressor High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,mounted on rubber vibration dampers Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise Centrifugal fan Forward curve centrifugal fans for air treatment section and axial fans for condensation section. Front, side and underside air discharge of the treatment unit. High external pressure, long air supply distance Electric panel Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components. Easy operation line controller Cooling/Heating/Auto. Error indication. Timing on/off. Product options Economizer with fresh, return air dampers and fresh air hood. Free cooling function for low ambient temperature. Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C BMS devices. T3 (Tropical climate). Condenser coil guard. Roof curb. Metal / aluminum filter. Air pressure switch for indoor fan. High static condenser fan option with sealed + drain.condensing section. Optional water heating coil. Metal or plastic mesh on condenser coil. Optional supply / return air configurations. Upgraded evaporator fan motor drives. G4 filter, plate and bag filter.

water three-in-one washing, filling and sealing machine Application washing filling and capping three in one filling equipment is one high precision and speed liquid filling machine, product design adopts bottle-neck block technology, not only avoid bottle-neck second pollution, but also can produce different bottle shape filling in one machine. Greatly improve the equipment usage scope. Production capacity from 3000bottles per hour to 3600bottles per hour can be choose by customer. Main-frame machine adopts frequency conversion timing motor, convenience adjustment speed within throughput. Technical parameters Model Capacity 330ml 500ml 1000ml 1500ml 2000ml SD-XGF-12-12-4 4000 3000 2500 2000 1500 SD-XGF-18-18-6 8000 6000 5500 5000 4500 SD-XGF-24-24-8 10000 8000 6500 5500 5000 SD-XGF-32-32-8 14000 12000 10000 8000 6000 SD-XGF-40-40-12 18000 16000 12000 9000 7000

Capacity: 120~300kw. Efficiency: 2.7~3.3 cop. Warranty: Compressor- 3 years limited. other parts-1 year limited. Structure Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance toatmospheric agents. Direct expansion coils with condensate drain tray. Hermetic compressor High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,mounted on rubber vibration dampers Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise Centrifugal fan Forward curve centrifugal fans for air treatment section and axial fans for condensation section. Front, side and underside air discharge of the treatment unit. High external pressure, long air supply distance Electric panel Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components. Easy operation line controller Cooling/Heating/Auto. Error indication. Timing on/off. Optional Economizer with fresh, return air dampers and fresh air hood. Free cooling function for low ambient temperature. Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C BMS devices. T3 (Tropical climate). Condenser coil guard. Roof curb. Metal / aluminum filter. Air pressure switch for indoor fan. High static condenser fan option with sealed + drain.condensing section. Optional water heating coil. Metal or plastic mesh on condenser coil. Optional supply / return air configurations. Upgraded evaporator fan motor drives. G4 filter, plate and bag filter.

Description Unit Travel X travel mm 850 Y travel mm 550 Z travel mm 540 Distance between spindle nose and worktable surface mm 150-690 Distance from spindle center to stand column surface mm 610 Distance from table center to stand column surface mm 335-885 Worktable Table area mm 550*1000 Max. loads kg 630 T-slot width mm 5×18H8 Spindle Max. spindle speed rpm 8000 Angle of spindle taper - BT-40 Feed rate X/Y/Z rapid speed m/min 36 Max. cutting feedrate m/min 24 Automatic Tool Changing System Manipulator synchro unclamping Qty. Of tools pcs 24 Tool changing time sec 1.4 Max. tool length mm 350 Max. tool diameter/adjacent without tool mm 100/190 Max. tool weight kg 8 Motor Spindle motor kw 5.5/7.5 X/Y/Z axis motor kw 3/3/4 Cooling pump motor（spindle） w 750 Cooling pump motor（stampings） w 600 Screw Motor w 200×2 Precision（SN precision according to standard JB/T8772.4-1998） Positioning accuracy mm 0.018 Repetitive positioning accuracy mm 0.012 Machine dimension Overall dimension（L×W×H） mm 2975×2710×2692 Dimension of wood packing case（L×W×H） mm 3325×3180×3300 Weight kg 6500 Power supply kw 18

Description Unit VMCL1100 Travel X travel mm 1100 Y travel mm 560 Z travel mm 575 Distance between spindle nose and worktable surface mm 200-775 Distance from table center to stand column surface mm 337-887 Worktable Table area mm 550×1200 Max. loads kg 800 T-slot width mm 4×18H8 Spindle Max. spindle speed rpm 8000 Angle of spindle taper - BT-40 Feed rate X/Y/Z rapid speed m/min 32/32/32 Max. cutting feedrate m/min 15 Automatic Tool Changing System Manipulator Qty. Of tools pcs 24 Tool changing time sec 1.55 Max. tool length mm 300 Max. tool diameter/adjacent without tool mm φ100/φ180 Max. tool weight kg 8 Motor Spindle motor kw 7.5/11 X/Y/Z axis motor kw 3/3/4 Cooling pump motor w 0.37+0.55 Precision（SN precision according to standard JB/T8772.4-1998） Positioning accuracy mm 0.012/0.01 Repetitive positioning accuracy mm 0.008/0.006 Machine Dimension Overall height of machine mm 3160 Floor area（L×W） mm 3340×3065 Net Weight kg 6800 Power supply kw 30

DOPOM is a product with a great balance of characteristics,making it suitable for many industrial and model building applications.In recent years,there is a growing demand for low-distortion material with good workability for precision machining and large workplaces,and for automated production of multiple pieces.By optimizing the molding and anneal-ing processes,DOPOM has successfully developed a low distortion material DOPOM ‘super’ that has extremely low distortion.It is recommended as material for product with strict dimensional accuracy and automated process. PERFORMANCE CHARACTERISTICS: · Well rounded balance of three major aspects:material properties,cost and machinability. · Good chemical resistance to organic solvents ad alkaline substances,but will be oermeated by strong acids. · There are wide range of lineup from rod with 3 mm-250mm(including centerless and super) diameters to sheet and plate with 0.2mm-100mm thickness. · Deformation is about 1/4 of conventional products. · Heat-dependent dimensional change in thickness and length almost zero at temperatures up to 140°C. · Low rate of dimensional change and shape deformation during cutting allows shorter cutting times.

Brief Introduction FE Non-PVC soft bag IV solution production line is the latest production line with most advanced technology. It can automatically finish film feeding, printing, bag making, filling and sealing in one machine. This LVP FFS line can be used to automatically fill 50-5000ml general solution, special solution, dialysis solution, Parenteral nutrition, Antibiotics, Irrigation and Disinfectant solution etc. FE can supply you different PP bag design with single boat type port, single/double hard ports, double soft tube ports etc. Main features: 1.100% film utilization: No waste edge between bags, reducing both material and energy consumption. 2.Special IV bag design: each bag saves 10mm film than others. 3.Reliable heating and welding system: Leakage rate less than 0.03%. 4.Quick changeover: 0.5-1 hour to switch from one size to another. 5.Stable transmission system: only needs 1 control system, 1 HMI and 1 operator. 6.Safe filling nozzle: No solution overflows, no particles generation. 7.Auto faulty rejection system detected by the machine. 8.Production line length is reduced by 1/3, both workshop and air conditioning and cleaning area are reduced by 1/3, greatly reducing the initial investment and future running cost. 9.Simple structure, more stable and reliable performance.

Brief Introduction XGF PP Bottle LVP Wash-Fill-Seal Machine has three sections, ionic air washing or ionic air plus water washing, constant pressure filling, and hot melting sealing. It can automatically finish the processes of bottle feeding, bottle entering, bottle reversing by manipulator, ionic air reversely blowing and washing, bottle conveying, fixed volume filling, cap sorting, cap feeding, simultaneously heating cap and bottleneck, air eliminating, hot melting sealing, bottle conveying out etc. It is mainly applied to the washing, filling and sealing production for PP plastic soft and hard bottle large volume parenteral, like glucose infusion, sodium chloride infusion, sodium chloride and dextrose injection, metronidazole injection etc. Main Features 1. Compact integrated design of wash-fill-seal with smaller production area 2. Applicable to any round or flat IV solution bottles with different shapes 3. Voice alarm when fault, and machine halt 4. PLV control, all operation data can be set, changed and kept on file 5. CIP/SIP on line

Brief Introduction BXAZ ampoule cleaning, drying, filling and sealing compact production line is a new type of ampoule production line which adopted the advanced international technology, combined several FE Pharmatech’s patents and according to the domestic ampoule production situation. This line is composed by CLQ vertical ultrasonic cleaning machine, RSM sterilizing drying machine and AGF filling and sealing machine. It is divided into cleaning zone, sterilizing zone, filling and sealing zone. This compact line can work together as well as independently. Main Features 1The compact line realizes single linkage, continuous operation from washing, sterilizing，filling and sealing. The whole production process realizes cleaning operation; protects products from contamination, meets the GMP production standard. 2 This line adopts water and compressed air cross pressure jet wash and ultrasonic wash at inverted state. The cleaning effect is very good. 3 The ultra filtration technology is applied at the washing machine’s filter. The clean and sterile washing water and compressed air is obtained through terminal filter, which can improve the clarity of the washed bottle. 4 Bottle infeed auger and star wheel meet, the auger space is small. Ampoules can walk straight. Ampoules can transfer more stable and can hardly broken. 5 Double tank and double circulation. The circulation water tank and rough wash water tank are totally separate. The cleaning water is used step by step. The cleaning effect is much better. 6 The stainless manipulators are one side fix. The location is more accuracy. The manipulators are wearproof. When changing of pitch the manipulators no need stretch out and turn. The turning bearing wont contaminating the cleaning water. 7 The ampoules are sterilized by the hot air laminar flow sterilization principle. The heat distribution is more even. The ampoules are under the HDC high temperature sterilization condition, which meets the standard of GMP. 8 This equipment adopts negative pressure sealing principle to seal the high efficiency filter which are used for purify the tunnel. The filter is easy to install which can ensure the one hundred purification condition. 9 The equipment adopts hinge type seat heat and horizontal hot air fan structure. The maintenance of the equipment is more convenient and laborsaving. 10 This equipment adopts chain conveying belt with flank. The conveying belt won’t be off track, anticreeper, no bottle falling. 11 The equipment adopts advance technology such as multi-needle filling, front and rear nitrogen charging and wire drawing sealing, which can meet the standard of different type of products. 12 The fill-seal machine adopts balcony structure. The starwheel infeed and convey bottles continuously, the running of the equipment is stable and less bottle breakage. 13 This equipment is universal. It can’t be used to 1-20ml ampoules. Changing parts are convenient. In the meantime, the equipment can be used as vial washing, filling and capping compact line by changing some mould and outfeed wheel.

Main application This unit is made up of CLQ Ultrasonic Vertical Washing Machine, RSM Sterilizing & Drying Machine and KGYX Filling & Sealing Machine. Divided into three working areas of washing, sterilizing & drying and filling & sealing. It can be either used in-line or in the form of three single machines. Can automatically finish the processes of water spaying, ultrasonic wave washing, compressed air blowing, recycling water flushing, compressed air blowing, fresh high-temperature sterilizing, cooling, bottle-collating, filling, cap-collating, stopppering, panel mounting and so on for vials. Can be equipped with Servo-motor , more stability and accuracy.

Brief Introduction Glass bottle IV solution production line is mainly used for IV solution glass bottle of 50ml~500ml cleaning, filling, stoppering, capping etc. It can be used for the production of glucose, antibiotic, amino acid, fat emulsion, nutrient solution and biological agents and other liquids etc. Main Features 1.    Bottle washing machine adopts new design, rough cleaning adopts the same direction for bottle input and output, saving operators and machine space. 2.    Bottle output from rough and fine washing machine adopts twice bottle receiving, avoiding bottle reversal and broken. 3.    Bottle washing machine uses intermittent rinsing, avoiding cross contamination caused by continuous rinsing. 4.    Bottle input adopts the combination of bottle hook and guide plate, making the bottle input reliable and no bottle reversal. 5.    Washing water can be recycled and filtered, reduce water consumption. 6.    Filling adopts time and constant current theory; filling quantity can be adjusted by computer with high accuracy. 7.    No bottle no filling, can realize CIP/SIP.

Brief Introduction CPP series bottle blowing machine is with high production automatically blowing for IV bottle and other PP bottles, includes stations of preform loading, preform heating, preform delivering, blowing, bottle taking out. The blown bottles are suitable for filling glucose infusion, sodium chloride infusion, glucose and sodium chloride injection, metronidazole injection etc. Main Features 1.Different performs loading, no need to change any spare parts 2.Fully servo electric control 3.Piston type high pressure mold lock, improving blown bottle quality 4.Stable power output, ensure bottle uniform thickness 5.Max production capacity 12000 bottles per hour