Remote Control Hopper Remote Control Hopper is used for loading cargo whose size is different. The hopper is also used for transporting cargo from storage and lading, which leaves out unloading and loading in the yard. The lading efficiency is higher.

Motor-Hydraulic Scrap Steel Grab has hydraulic power and control system itself, and the hydraulic power system is imported from Europe and USA. The grab uses constant output pump and servo system. The flow of pump can change by itself according to working pressure. When the pressure reaches the max pressure, the flow is almost zero, so it can reduce the overflow, and reduce the temperature rise of oil. The opening and closing is controlled by valves or positive inversion motor which ensures the grab can positive inversion rotate frequently. The grab can be designed as half-close or full-open type with long teeth. The peels of the grab are particular, it is easy to grab scrap steel. The grab has six or eight peels, and each peel is driven by an oil cylinder, so the material won’t leak. The grab has tie-in on the grab and it is easy to connect to the crane. It can be used to load steel scrap whose piled density is below 3t/m3 Type and Size Volume  (m3) (mm) Dimensions (kg) Empty Weight (KW) Power (s) Close time (Kg/cm2) Pressure (t) SWL A B C D Full open Half open Full close 380V 50Hz 440V 60Hz DYD5[1]2 1 1766 2626 2532 2093 1800 2000 2150 15 18.5 17 200 5 DYD8[1.5]3.2 1.5 1925 3462 3141 2730 3000 3200 3400 18.5 21 20 200 8 DYD10[2]4.2 2 2242 3565 3456 3147 4000 4200 4300 22 26 16 200 10 DYD16[3]5.5 3 2381 4184 3649 3155 5300 5500 5700 37 43 18 200 16 DYD20[4]7 4.0 2840 4505 3850 3282 6800 7000 7200 37 43 25 200 20 DYD25[5]9 5.0 3020 4807 4125 3027 8500 9000 9200 45 52 22 200 25 DYD30[6.5]9.8 6.5 3137 4983 4230 3700 9500 9800 10200 45 52 25 200 30 DYD35[8]12 8 3645 5513 4490 3850 11500 12000 12500 52 55 25 200 35 DYD40[12]16 12 4662 7188 4730 4590 15000 15500 16000 65 75 25 200 40 Note: 1.As the products have been improved, we will not advice another. 2.We can design and produce the grab according to user’s demand.

Description Unit Travel X travel mm 1300 Y travel mm 650 Z travel mm 710 Distance between spindle nose and worktable surface mm 120-830 Distance from worktable center to column surface mm 355-1005 Worktable Table area mm 630*1600 Max. loads kg 1500 T-slot width mm 5×18H8×100 Spindle Max. spindle speed rpm 6000 Angle of spindle taper - BT-50 Feed rate X/Y/Z rapid speed m/min 15/15/12 Max. cutting feedrate m/min 5 Automatic Tool Changing System manipulator Qty. Of tools pcs 24 Tool changing time sec 2.9 Max. tool length mm 400 Max. tool diameter/Adjacent no tool mm φ110/φ200 Max. tool weight kg 15 Motor Spindle motor kw 15/18.5 X/Y/Z axis motor kw 4/4/7 Cooling pump motor w 0.4+1.5 Precision（SN precision according to standard JB/T8772.4-1998） Positioning accuracy mm X:0.026,Y/Z：0.018 Repetitive positioning accuracy mm X:0.013,Y/Z：0.01 Machine Dimension Overall height of machine mm 3020 Floor area（L×W） mm 3740×3440 Weight kg 12000 Power supply kw 40

Description Unit Travel X travel mm 1100 Y travel mm 560 Z travel mm 575 Distance between spindle nose and worktable surface mm 200-775 Distance from spindle center to stand column surface mm 590 Worktable Table area mm 550×1200 Max. loads kg 800 T-slot width mm 4×18H8×125 Spindle Max. spindle speed rpm 6000 Angle of spindle taper - BT-50 Feed rate X/Y/Z rapid speed m/min 24/24/15 Max. cutting feedrate m/min 15 Automatic Tool Changing System Qty. Of tools pcs 24 Tool changing time sec 2．5 Max. tool length mm 400 Max. tool diameter/ Adjacent no tool mm 110/200 Max. tool weight kg 15 Motor Spindle motor kw 11/15 X/Y/Z axis motor kw 3/4/4 Cooling pump motor w 0.4+0.9 Precision（SN precision according to standard JB/T8772.4-1998） Positioning accuracy mm X:0.018,Y/Z：0.014 Repetitive positioning accuracy mm X:0.012,Y/Z：0.011 Machine Dimension Overall height of machine mm 3162 Floor area（L×W） mm 3340×3065 Weight kg 8500 Power supply kw 35

Description Unit Travel X travel mm 600 Y travel mm 410 Z travel mm 510 Distance between spindle nose and worktable surface mm 150-660 Distance from table center to stand column surface mm 215-625 Worktable Table area mm 400×800 Max. loads kg 700 T-slot width mm 3×18H8 Spindle Max. spindle speed rpm 8000 Angle of spindle taper - BT-40 Feed rate X/Y/Z rapid speed m/min 15/15/15 Max. cutting feedrate m/min 5 Automatic Tool Changing System Hat type Qty. Of tools pcs 16 Tool changing time sec 7sec Max. tool length mm 350 Max. tool diameter mm 180（adjacent without tools） Max. tool weight kg 6 Motor Spindle motor kw 5.5/7.5 X/Y/Z axis motor kw 3 Cooling pump motor w 0.4+0.9 Precision（SN precision according to standard JB/T8772.4-1998） Positioning accuracy mm X/Z：0.015，Y：0.014 Repetitive positioning accuracy mm X/Z：0.009, Y:0.008 Machine Dimension Overall height of machine mm 2550 Floor area（L×W） mm 2500×2630 Weight kg 5500 Power supply kw 18

Description Unit VGC1500 X travel mm 1500 Y travel mm 850 Z travel mm 720 Distance between spindle nose and worktable surface mm 150-870 Distance from spindle center to Z axis guide surface mm 155 Table area mm 850×1600 Max. loads kg 2500 T-slot width mm 5×22H8 Max. spindle speed rpm 6000 Angle of spindle taper - BT-50 X/Y/Z rapid speed m/min 24/24/20 Max. cutting feedrate m/min 5 Qty. Of tools pcs 24 Tool changing time sec 2.9 Spindle motor kw 15/18.5 X/Y/Z axis motor kw 7 Positioning accuracy mm X/Y/Z：0.01 Repetitive positioning accuracy mm 0.006 Overall size mm 3670×3680×4100 Weight kg 22000

Item Description Unit Process Range Max. swivel diameter of spindle over bed mm 635 Max. swivel diameter of spindle over saddle mm 410 Max.machining diameter mm 620 Max. machining length mm 520 Spindle Chuck diameter mm φ304 Spindle nose model - A2-8 Taper of spindle bore - 1:20 Max. speed rpm 2500 Motor power Kw 11/15 Travel X axis travel mm 320 Z axis travel mm 550 Feed rate X/Z axis rapid shift m/min 12/16 Max. Cutting feed rate m/min 10 Tool turret Qty. Of tools pcs 12 OD tool size mm 32*32 Boring tool handle diameter mm φ40 Tool changing time (adjacent/far) sec 0.68/1.5 Tailstock Shaft diameter of tailstock mm φ110 Center taper - MT5 Center travel mm 150 Tailstock travel mm 460 Motor X/Y/Z motors Kw 2.5 Cooling pump motor Kw 0.4 Precision Positioning precision mm X/Z：0.016/0.025 Repetitive positioning precision mm X/Z：0.007/0.01 Reverse difference mm X/Z：0.006/0.012

Parameters Unit GMC2040 Table size mm 4000*2000 Table load kg/m2 2000 T-slot size（width x nos.） mm 28*11 X travel mm 4500 Y travel mm 2800 Z travel mm 1250（1000 optional） Width passed the gantry mm 2600 Distance from spindle nose to table surface mm 200～1450（200～1200 optional） Spindle nose — ISO 50# Main motor power（cont./30min.） kW SIEMENS：22/30（optional 28/39） FANUC：22/26（optional 30/37） Max. Speed of spindle rpm 2000（3000、6000 optional） Cutting feed speed mm/min 5000 Rapid speed m/min 10 Type of tool magazine Mechanical arm Type of tool holders BT-50、JT-50 Magazine capability Mechanical arm 32（24、40 optional） Chain type - Max. Tool diameter mm φ125（adjacent：φ200） Max. Tool length mm 350 Max. Tool weight kg 20 Positioning accuracy mm Repetitive positioning accuracy mm Dimension mm 11030*5810*6860 Machine weight T 65 Attachment milling head Milling heads of right angle, universal, extended and special Optional parts Attachment milling head

Machine Introduce: This machine can get perfect cut for licorice root. cutting size is adjustable from 1-20mm Specification: Model QYJ-200 QYJ-300 Capacity: (kg/h) 100-200 150-300 Power 2.2 KW , 3 Phase 4 KW , 3 Phase Cut range 1-20 mm adjustable Cut speed Fix adjustable Dimension:(L*W*H) 1900*840*1000mm 2060*1020*1020mm Weight: (Kg) 500 650

Parameters Unit GDMC2560-5M Table size 6000*2500 Table load kg/m2 2000 T-slot size（width x nos.） mm 28*13 X travel mm 6500 Y travel mm 3800 Z travel mm 1000 W travel mm 2000 Width passed the gantry mm 3000 Distance from spindle nose to table surface mm 150～2600 Spindle nose — ISO №50 Main motor power（cont/30min.） kW SIEMENS：37/51 FANUC：37/45 Max. Speed of spindle rpm 3000（6000 optional） Max. Output torque of spindle Nm 1600 Dia. Of spindle mm Φ120 Max. axial force of spindle N 32000 Cutting feed speed mm/min 5000 Rapid speed X、Y、Z m/min 10 W m/min 5 Type of tool magazine Mechanical arm Type of tool handle BT-50、JT-50 Magazine capability Mechanical arm 60（40、90 optional） Chain type - Max. Tool diameter mm φ125（adjacent：φ250） Max. Tool length mm 450 Max. Tool weight kg 25 Dimension mm 15300x7610x8000 Machine weight T 130 Attachment milling head Milling heads of right angle, universal, extended and special. Optional parts Attachment milling head

parameters Unit GMC1325 Table size 2500*1300 Table load kg/m2 2000 T-slot size（width x nos.） mm 28*7 X travel mm 3000 Y travel mm 1950 Z travel mm 800 Width passed the gantry mm 1700 Distance from spindle nose to table surface mm 200～1000 Spindle nose — ISO №50 Main motor power（cont/30min.） kW SIEMENS：22/30 FANUC：22/26 Max. Speed of spindle rpm 2000（3000、6000 optional） Max. Output torque of spindle Nm 1200 Dia. Of spindle mm Φ130 Max. axial force of spindle N 16000 Cutting feed speed mm/min 5000 Rapid speed m/min 10 Type of tool magazine Mechanical arm Type of tool handle BT-50、JT-50 Magazine capability Mechanical arm 32（40、50 optional） Chain type - Max. Tool diameter mm φ125（adjacent：φ200） Max. Tool length mm 350 Max. Tool weight kg 20 Dimension mm 7830*4480*5585 Machine weight T 40 Attachment milling head Milling heads of right angle, universal, extended and special. Optional parts Attachment milling head

Parameters Unit GMC1640 Table size 4000*1600 Table load kg/m2 2000 T-slot size（width x nos.） mm 28*9 X travel mm 4500 Y travel mm 2300 Z travel mm 800 Width passed the gantry mm 2100 Distance from spindle nose to table surface mm 200～1000 Spindle nose — ISO №50 Main motor power（cont/30min.） kW SIEMENS：22/30 FANUC：22/26 Max. Speed of spindle rpm 2000（ 3000、6000 optional） Max. Output torque of spindle Nm 1200 Dia. Of spindle mm Φ130 Max. axial force of spindle N 16000 Cutting feed speed mm/min 5000 Rapid speed m/min 10 Type of tool magazine Mechanical arm Type of tool handle BT-50、JT-50 Magazine capability Mechanical arm 32（40、50 optional） Chain type - Max. Tool diameter mm φ125（adjacent：φ200） Max. Tool length mm 350 Max. Tool weight kg 20 Dimension mm 10830*4930*5585 Machine weight T 52 Attachment milling head Milling heads of right angle, universal, extended and special. Optional parts Attachment milling head