Products Features 1. Widely applied to supermarket store, meat producing store, commercial cold room, food processing, dairy products cooling, medicine stores, seeding processing store, medical lab etc. 2. Condenser with copper pipe plus aluminum fin type for high efficiency ans stabilization 3. Low noise, low vibration, stable working with copeland compressors. 4. Convenient to enginner and repair with installation stop valves.

Products Features 1. Application range: food processing, logisitc center, meat processing center, chain restruant, medicine stores, seeds processing store, medical lab, biological medicine store, dairy products processing, edible fungus breeding center, temperature range from -5℃ to -23℃ 2. Reliable and integrated design, easy handling and installation with brand compressors and components 3. High efficiency inner grooved tube heat exchanger, removable door, easy for maintenance 4. Anti-vibration device for big units, optional parts of fan speed controller, low noise operation 5. Electro statically powder coated steel sheet casing

Products Features 1. Application range: food processing, logisitc center, meat processing center, chain restruant, medicine stores, seeds processing store, medical lab, biological medicine store, dairy products processing, edible fungus breeding center, temperature range from -5℃ to -23℃ 2. Reliable and integrated design, easy handling and installation with brand compressors and components 3. High efficiency inner grooved tube heat exchanger, removable door, easy for maintenance 4. Anti-vibration device for big units, optional parts of fan speed controller, low noise operation 5. Electro statically powder coated steel sheet casing  

Products Features Capacity: 45~105kw. Efficiency: 2.7~3.3 cop. Warranty: Compressor- 3 years limited. other parts-1 year limited. Structure Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance toatmospheric agents. Direct expansion coils with condensate drain tray. Hermetic compressor High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,mounted on rubber vibration dampers Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise Centrifugal fan Forward curve centrifugal fans for air treatment section and axial fans for condensation section. Front, side and underside air discharge of the treatment unit. High external pressure, long air supply distance Electric panel Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components. Easy operation line controller Cooling/Heating/Auto. Error indication. Timing on/off. Product options Economizer with fresh, return air dampers and fresh air hood. Free cooling function for low ambient temperature. Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C BMS devices. T3 (Tropical climate). Condenser coil guard. Roof curb. Metal / aluminum filter. Air pressure switch for indoor fan. High static condenser fan option with sealed + drain.condensing section. Optional water heating coil. Metal or plastic mesh on condenser coil. Optional supply / return air configurations. Upgraded evaporator fan motor drives. G4 filter, plate and bag filter.

Products Features Capacity: 12~35kw. Efficiency: 2.7~3.3 cop. Warranty: Compressor- 3 years limited. other parts-1 year limited. Structure Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance toatmospheric agents. Direct expansion coils with condensate drain tray. Hermetic compressor High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,mounted on rubber vibration dampers Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise Centrifugal fan Forward curve centrifugal fans for air treatment section and axial fans for condensation section. Front, side and underside air discharge of the treatment unit. High external pressure, long air supply distance Electric panel Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components. Easy operation line controller Cooling/Heating/Auto. Error indication. Timing on/off. Product options Economizer with fresh, return air dampers and fresh air hood. Free cooling function for low ambient temperature. Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C BMS devices. T3 (Tropical climate). Condenser coil guard. Roof curb. Metal / aluminum filter. Air pressure switch for indoor fan. High static condenser fan option with sealed + drain.condensing section. Optional water heating coil. Metal or plastic mesh on condenser coil. Optional supply / return air configurations. Upgraded evaporator fan motor drives. G4 filter, plate and bag filter.

Products Features 1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. 5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Pump/Cooling tower control 4.Special power supply 5.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Condenser: fouling factor 0.044m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% Compressor Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise. Heat exchanger The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%. Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit. PLC A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function.

Products Features 1.Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. 5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Pump/Cooling tower control 4.Special power supply 5.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Condenser: fouling factor 0.044m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% Compressor Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise. Heat exchanger The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%. Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit. PLC A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function.

Application This machine is specially made for all kinds of viscousity materials, such as chocolate paste，peanut butter, honey, butter, Mayonnaise, ketchup etc. All the contacted part with the oil is high quality stainless steel.. The machine adopts piston pump for filling. By adjusting the piston pump, it can fill all of the bottles in one filling machine, with quick speed and high precision. Technical Parameters Program SD-GZJ4 Filling head 4, 8,16,12 head can customized) Filling volume 100-1000ml Filling speed 1000 -12000 b/h Filling precision ≤±1% Power supply 380V/220 50-60HZ Power ≤1.5kw Air pressure 200L/min Net weight To be confirmed Dimension(mm) To be confirmed

Feature • High carbon steel blade • Cutting Φ 35mm diameter • Alloy Aluminum close handles • For cutting PVC flexible pipe tube Application Our pipe fitting tools are mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Fly cut, speed about 25m/min, cassette structure Special rollers design, more precise and solid Shaft diameter: 55mm or more, according to profile Mitsubishi PLC and converter Tool box and technical support

fly cut, speed about 25m/min cassette structure Special rollers design, more precise and solid Shaft diameter: 55mm or more, according to profile Wall plate 18mm thick Mitsubishi PLC and converter Tool box and technical support