The optical fiber unit is positioned in the center, two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then the cable is completed with a black or color LSZH sheath. Characteristic: Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property; Two parallel strength members ensure good performance of crush resistance to protect the fiber; Simple structure, light weight and high practicability; Novel flute design, easily strip and splice, simplify the installation and maintenance. Geometrical Characteristics: Fiber Core 1 2 1 4 Cable Dimension(mm) 2.0×3.0 2.0×3.1 2.0×3.8 2.0×4.0 Cable Weight(kg/km) 8 8.5 9 10 Mechanical Characteristics: Tensile strength(N) Long Term 30 Short Term 60 Crush resistance(N/100mm) Long Term 300 Short Term 1000 Bending Radius(CM) Dynamic 30 Static 15 Transmission Characteristics: SMF 50/125 62.5/125 1310/1550（nm） 850/1300(nm) 850/1300(nm) Attenuation(dB/km) ≤0.40/0.30 ≤3.5/1.5 ≤3.5/1.5 Minimum Bandwidth (MHz·km) Bandwidth(MHz·km) Bandwidth(MHz·km) --------- ≥500/1000 ≥200/600 Environmental Characteristics: Storage Operating Temperature -20℃~+60℃ FTTH Cable （GYXTPY）             FTTH Drop cable                    FTTH Indoor Cable            

Description: W-TEL-CCA series large capacity cabinet has the functions of fiber distribution, splice, storage and dispatch. It has dogged performance of resisting the open -air environment and can resist severe climatic changes and serious working environment. The protection grade reaches IP65. The cabinet is made of SMC material / Stainless steel for your option . Meanwhile, it can be used in the XPON connection to install optical fiber splitter, to compose a integration system of connection, distribution and light source distribution. This matches the large capacity XPON connection greatly.We are working for all kinds of fiber optic cross connection cabinet :48cores,96cores,144core ,288 core ,576 core etc . Product characteristics: Made of SMC material or stainless steel, good heat insulation, seal belt inside the door make it work efficiently in different conditions.. Mould operation of cable fuse and distribution, easy maintenance Direct fusion applicable Apply of bundle, belt-shaped and non-belt-shaped optical cables FC, SC, ST, LC adapter can be installed in it. Reliable optical fiber protection, earthing etc. The adapter is 30 °angle to the surface makes it easy to operate and protect the operator from the burning hurt. Different fusion and wiring marks, easy operation and making notes. Reasonable optical fiber cable panel to ensure the Dia of cable is more than 40mm in all directions. Can install different types of optical fiber splitter to compose a compact cable distribution system Features: 1.Excellent performance such as: water-proof,damp-proof,anti-erosion,anti-strike. Able to withstand abrupt climate change and extreme environment 2.Capacity can be flexibly customized as required 3.Installation is quick and convenient 4.Built-in direct splice unit is capable for providing direct connection function. 5.Perfect design of fiber wiring routing could facilitate management and maintenance of fibers 6.With secure and reliable fastening and grounding protection devices for the optic fiber 7.Applicable to strap-shaped and non-strap shaped fibers 8.Unique patent for the design of the door key,can never be easily broken. 9.With unique design of the adjust structure of temperature. Main Technical Parameters: (1)Operating temperature: between -40°C and +60°C (2)RH(relative humidity):95%(at temperature:+40°C) (3)Atmospheric pressure: between 70kpa and 106kpa (4)Isolation resistance: ≥2X10000M/500V(DC) (5)Anti-voltage strength: ≥3000V(DC)1min,no breakdown (6)Strong heat-proof performance,because the cabinet is made from high strength unsaturated polyester glass fiber reinforcement material called SMC (7)Static load-bearing capacity: 980N for the cover,980N for side surface,200N for door hinge (8)Sealing performance: YD/T988-199 (9)Using 12 core ODF panel integrated unit Models introduction: MODEL SIZE CAPACITY ASSEBLING TYPE REMARKS W-CCA48 450×315×185 48cores outdoor wall-mounted suitable for adapters such as FC,SC,length of pigtail can be 2m single-end,patch cable can be optional:2m~3m W-CCA96 960×525×325 96cores outdoor floor type W-CCA144 9600×525×325 144cores outdoor floor type W-CCA288 1450×750×325 288cores outdoor floor type W-CCA576 1450×750×620 576cores outdoor floor type SMC material type Stainless steel material type

Cable Splice Closure (Cable Connector - Cap Way) Protective equipment of cable connector used for the connection of cable and the cable ramification of programmed control line series. The switch box of line can be replaced. Cable Splice Closure (Cable Connector - Cap Way) Cable Splice Closure: Characteristics of the product: The plastic for engineering of high resistance, the anti-aging and the material of stainless steel to the external pieces. Impermeability, waterproof, anti-gas, protection to the corrosion. Easy operation, high economic value, respective use. Protection to the corrosion, long life of the use; acceleration of construction, easy for the emergency repair; saving of reduction, maintenance equipments of expenses. Specification: 10 pairs - 30 pairs, 50 pairs, 100 pairs, 200 pairs. Cable Splice Closure: Technical characteristics: Inflation 200Kpa, stays 100h in condition of normal atmosphere, value of the loss of pension<5 Inflation 60Kpa, during a circulation of the change of the temperature (- 30℃~+60℃), value of the loss of pension<5 Cable Splice Closure (Horizontal Connector of Cable-Way) Protective equipment of cable connector used for the connection of cable and the cable ramification of programmed control line series. The switch box of line can be replaced Cable Splice Closure: Characteristics of the product: Application the plastic for engineering of high resistance, the anti-aging and the material of stainless steel to the external pieces. Impermeability, waterproof, anti-gas, protection to the corrosion. easy operation, high economic value, respective use. Protection to the corrosion, long life of the use; acceleration of construction, easy for the emergency repair; saving of reduction, maintenance equipments of expenses. Can use in covered and aerial form. Specification: 10 pairs - 30 pairs, 50 pairs, 100 pairs, 200 pairs. Cable Splice Closure: Technical characteristics: Inflation 200Kpa, stays 100h in condition of normal atmosphere, value of the loss of pressure<5; Inflation 60Kpa, during a circulation of the change of the temperature (- 30℃~+60℃), value of the loss of Pressure<5; Cable Splice Closure: Conditions of the work: temperatura-30℃~+60℃ Humidity relati≤95% pressure Atmosphere 70Kpa~106Kpa

Key Features > 1/1.7" 12MP SONY Starvis Back-illuminated CMOS > H.265&H.264 dual-stream encoding > 12MP 4000×3000@15fps, 8MP 3840×2160@25fps > 3.6-11mm motorized lens(Fixed 5mm/3.2mm 4K Lens optional) > DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC, ROI,Defog > 1/1 audio in/out > Rich interfaces:1*Alarm I/O, 1*Reset, 1*RS485, 1*CVBS output, SD Card Slot Max.128GB) > Intelligent analysis:cross-border detection, regional Invasion detection, left-behind Items detection, smart stream, smart detection, smart control, color abnormal, sound abnormal, brightness abnormal, video abnormal, > Metal, IK10 > Deepbase junction box optional

Area of Applications: Can be used in outside plant, underground, aerial, pedestal and direct buried applications. The device allows for direct jointing and bifurcated jointing. It also protects fiber optic splices from the elements while providing fast and easy no-cost reentry. Specifications: Excellent capability to withstand quake, pressure, stretch. It is Strong and durable. Excellent capability to adapt to natural conditions. It can operate smoothly in temperatures varying. From -40 +80: . Sealing performance: the innovative and unique waterproof elastic sealing is easy to install and seal completely. The splice case and sealing packing can be opened and reused for more than 10 times, ensure excellent performance and meet all the requirements for telecommunications. Service life: 25 years in service for all major components in the splice case. Technical features: Circle numbers of totality Max. 436 core Cable number of max.8-out and 8-in Totality loss: ≤0.03dB Anti-bump capacity 16N m three times no leak & no rip Max.voltage 15KV DC Atmospheric pressure defense level EN60529 IP54 IP58 Fire-resistance level UL94 VO 70Kpa-106Kpa Performance condition: temperature :-40 ~ +80 Relative humidity: ≤0-85% Dome type (Cap type) Cassette type Splitter type Accessories

TEC cooling system for small cabinet enclosure room of telecom battery W-TEL Peltier TEC 200 is a compact cooling system designed to remove excess heat from electronic equipment such as batteries in small enclosures thereby prolonging product service life in the enclosure. It is designed for installation in industry applications with a demand for long service life and minimum service. The unit utilizes the thermoelectric technology and is designed for 48V DC supply. It meets IP55 regulations and is therefore reliable for installation in both indoor and outdoor enclosures. WTEL Peltier TEC is widely used in battery compartment cooling in shelter or cabinets, small enclosure cooling and indoor/outdoor cabinets. Environment • Compact, robust and oxidation resistant construction • External fan with humidity protection and weather protected – ensures long service life of the system. • The only moving parts are the fans, which are high quality fans that require minimum maintenance and ensure long service life of the system. Heat Management • Compact thermoelectric cooling utilizing Peltier elements. • Two circuits (internal and external) – utilizing electric transfer of heat from inside to outside. Installation • Plug and play connection cables to ensure smooth installation • Thorough function, cooling performance and voltage testing from factory. Controller • Cooling/heating automatically. • Dry contactor alarming • Adjust fan speed • RS485 interface for local and remote monitor and control • Hydrogen discharge function (Control an external fan to run timely) (Parameter may changed without notification) Cooling & Heating Capacity W 200-420 Power consumption（cooling/heating) W 270-400 Input voltage range V DC -48V ~ 58V Dimension (HXWXD) including flange mm 400*180*211.5 Net weight KG 8.5 Mounting method Door/roof Operational temperature range ℃ -40 ~ +55 Storage temperature range ℃ -40 ~ +70 Storage humidity RH 5~95% Noise dB(A) 63 Protection from dust, water and wind driven rain according to EN 60529 IP Class 2 IP55 Color RAL 7035

Key Features: > 1/2.5” 5MP PS5510 Progressive CMOS > H.265+/H.265/H.264/H.264+ dual-stream encoding > 15fps@5MP 2592*1944; 25(30)fps@4MP 2560*1440 > 2.8-12mm Manual Varifocal lens > 24pcs SMD IR Leds, 40m IR distance > DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC,defog > Support ONVIF 2.4 or above > DC 12V/PoE, IP66 Waterproof > Multiple network monitoring: Web viewer, CMS, NVR, XMeye > Support for mobile video surveillance(iOS,android); > Support cloud service, network penetration, alarm information pushed to phone, etc.

Brief Introduction It’s just for 10-20ML oral filling&sealing, a major machine in production line for oral liquid, it main used in filling, capping placing and sealing of straight tube bottle. Tracking filling, cap automatically conveying by electromagnetic oscillator, three knifes centrifugal sealing (or screwing), no bottle no filling. Filling and sealing integrated in one machine, advanced design, compact structure and completely comply with requirement of GMP.this kind of machine . Characteristic ◆All elements is well know brand. ◆Direct viewing operation, no bottle nofilling, measuring accurate. ◆Three knifes centrifugal sealing, ensure firm and beauty. ◆The whole machine is designed according to the requirements of GMP Technical Parameters Model CS-4 10/20 Cutting dimension 10-20Ml Production 60-90 bottles/min Filling accuracy ≥99% Power Supply 380V 50Hz Damaged Rate ≥99% Power 1.5KW Weight 450KG Boundary dimension 1400 *1200*1600mm

Brief introduction CSGX-30/100 Automatic Oral&sSyrup Filling&rotation (rolling) machine is built in the absorption of foreign advanced tecnology, based on independently developed by the company ,It is the domestic leading level. This machine is suitable for oral and syrup liquid filling&capping. Widely used in food, pharmaceutical, chemical industries and scientific research.Full compliance with the GMP requirements. Characteristic ◆Human-machine interface settings, an easy and intuitive, PLC control ◆Frequency control, the production rate be adjusted automatically count ◆No bottle no filling ◆High-precision cam meter control, precise positioning ◆SUS304 and 316L stainless steel, full compliance with GMP requirements Technical Parameters Filling volume 30-150ML Loading error ≤ ±1% Rotation (rolling) Cover pass rate ≥99% Production capacity 30-60 bottles / min  70-100 bottles / min Power 380V/50Hz Power 2.0 kw Net weight 600 kg Dimension 2000*1000*1500mm

The utility model relates to an automatic molding filling machine for a plastic bottle of oral liquid, including a rack, feeding device and control system. Its characteristics are as follows: Described in the rack, in turn, is equipped with corresponding plastic molding equipment, filling equipment, the tail sealing device, cutting device and creasing device, described the feeding device, plastic molding equipment, filling equipment, sealing device, cutting device and creasing device connected with control system. The utility model has compact structure, realizes automatic operation, low manufacturing cost and high production efficiency. Instructions for installation of the filling machine for the first time film rolling forming oral liquid: 1. Stable air source of 0.5-0.7mpa is required. 2. The power supply of 220v-380v /50HZ is required to be 4.3kw. 3. The equipment shall be grounded. 4. Mould circulating cooling water. Instructions for the maintenance of the filling machine for the primary forming oral liquid of film rolling: 1. The equipment needs to be cleaned and maintained every day. 2. Add lubricating oil to all moving parts every day. 3. If there is any abnormality in the operation of the equipment, it shall be stopped for inspection.   Operation instructions of the filling machine for the first time film rolling forming oral liquid: Instructions for the maintenance of the filling machine for the primary forming oral liquid of film rolling: 1. PLC control, stepless frequency conversion adjustment. 2. Seven jobs, including unwinding, plastic forming, filling, batch number printing, tail cutting, punching and cutting, etc., shall be completed automatically by the program. 3. Human-machine interface device, simple and clear operation. 4. The filling head shall not drip, drip, foam or overflow. 5. All the relevant parts in contact with the liquid medicine are made of high-quality stainless steel, meeting the GMP standard. 6. The main pneumatic components and the electrical appliances adopt imported parts. 7. The automatic filling system of electronic peristaltic pump and mechanical filling system are two kinds, and the accurate measurement error is small.  Main technical parameters of the primary film roll forming oral liquid irrigation machine:  The maximum molding depth is 12mm Impact times: 15-25 times/min Number of filling head 5 packaging materials PVC/PE or PET/PE (0.2-0.4) * 120mm Filling capacity: 1-50ml/ piece The total power supply is 4.5kw Voltage 220v, 380v three-phase /50Hz Weight (kg) 750kg External dimension: 2300 * 850 * 1400 (mm)

Key Features > 1/1.7" 12MP SONY Starvis Back-illuminated CMOS > H.265&H.264 dual-stream encoding > 12MP 4000×3000@15fps, 8MP 3840×2160@25fps > 5mm 12MP 4K Fixed Lens (3.2mm optional) > DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC, ROI > 1/1 audio in/out > Rich interfaces:1*Alarm I/O, 1*Reset, 1*RS485, 1*CVBS output, SD Card Slot Max.128GB) > Intelligent analysis:cross-border detection, regional Invasion detection, left-behind Items detection, smart stream, smart detection, smart control, color abnormal, sound abnormal, brightness abnormal, video abnormal, > Metal, IK10 > Deepbase junction box optional

Product Type Pure Cotton Bedding set Brand ICOSYHOME Model CB0232 Material Pure Cotton Technics Active Dye Print,Embroidery Parts Sewn-in Lable, Tag Feature Anti-Pilling ,Anti-Static Executive standards GB/T22844-2009  SGS Stand Size 250*250    230*250mm or customized