1. Light weight can reduce building expenses. 2. Time can be saved on a building project due to the simple installation. 3. Both polyester cores of the panels are fire proof and meet the relevant standards completely. 4. Good durability with special coating, the warranty of the color coated steel is 10-15years, life of the panels can be up to 35 years with spary-painting antirust on the steel sheet every 10 years. 5. Wide range of material for your choice: rock wool, polystyrene and polyurethane etc. These material have low heat coefficient and excellent for hot or cold temperature insulation. 6. Good sound insulation can be up to 40-50 decibels. 7. The press steel sheet has clear edges and panels are available in various colors. They meet the requirements for different styles of building materials and are beautiful and elegant. 8. Ideal for special designs because they are easy to form and cut. 9. Good fire-proof equipments, we choose High sensitivity air sampling smoke fire detector, so it can give warning signal in the early stage of fire.

1. Light weight can reduce building expenses. 2. Time can be saved on a building project due to the simple installation. 3. Both polyester cores of the panels are fire proof and meet the relevant standards completely. 4. Good durability with special coating, the warranty of the color coated steel is 10-15years, life of the panels can be up to 35 years with spary-painting antirust on the steel sheet every 10 years. 5. Wide range of material for your choice: rock wool, polystyrene and polyurethane etc. These material have low heat coefficient and excellent for hot or cold temperature insulation. 6. Good sound insulation can be up to 40-50 decibels. 7. The press steel sheet has clear edges and panels are available in various colors. They meet the requirements for different styles of building materials and are beautiful and elegant. 8. Ideal for special designs because they are easy to form and cut. 9. Good fire-proof equipments, we choose High sensitivity air sampling smoke fire detector, so it can give warning signal in the early stage of fire.

1. Using box-type overall design, compact in structure and beautiful in appearance; 2. Scientific designs, steady air flow, fully exert the heat-transfer capacity of the unit; 3. Rational performance design and high EER(energy efficiency ratio) of the unit; 4. Using external rotor motor, fans good appearance, low noise operation; 5. Maintenance:The panel is easy to remove.

It combines the advantages is wood and cement board: as light as the wood, as substantial as the cement, with the characters like sound-absorbing, shock resistance, fire resistance, waterproof, moisture&mildew protection, it can be widely used in sports stadiums theaters, cinema, conference room, churches, factories, schools, libraries, swimming pools and the offices,and has a good acoustic and decorative effect. The capacity and quality are the first manufacturer in the country.

It combines the advantages is wood and cement board: as light as the wood, as substantial as the cement, with the characters like sound-absorbing, shock resistance, fire resistance, waterproof, moisture&mildew protection, it can be widely used in sports stadiums theaters, cinema, conference room, churches, factories, schools, libraries, swimming pools and the offices,and has a good acoustic and decorative effect. The capacity and quality are the first manufacturer in the country.

Specification P9-16 Hole Diameter 9mm, Center to Center 16mm Surface Melamine / Woode Veneer / Painting / Fire resistance panel Core 1,MDF core, low formaldehyde with E1 standard 2,ECO core, which is low formaldehyde with E0 standard. 3,MGO core, which is high fire resistance level with A standard. 4,any required core materials could be replaced. Back Soundtex acoustic felt attached on the back of the panels. Noise Reduction Coefficient 0.7 Fireproof grade GB8624 2012 A / B1 Eco-protection grade E0 / E1 Installation aluminum keel and clips, wood frame, gun nail Certification BV,CE,SGS,ISO9001-2008 Test report Eco protction, sound absorption, flame retardant Model Type Specification NRC Punching Rate P316 M-K-3/8-16-15 0.8 3.5% PL316 M-K-3/8-16-15 0.8 3.4% P616 M-K-6/8-16-15 0.85 14% PL616 M-K-6/8-16-15 0.85 13.8% P916 M-K-9/8-16-15 0.9 32% PL916 M-K-9/8-16-15 0.9 31.8%

Specification M-KT-8-30-20-15 Slot Width 30mm Surface Melamine / Woode Veneer / Painting / Fire resistance panel Core 1,MDF core, low formaldehyde with E1 standard 2,ECO core, which is low formaldehyde with E0 standard. 3,MGO core, which is high fire resistance level with A standard. 4,any required core materials could be replaced. Back Soundtex acoustic felt attached on the back of the panels. Noise Reduction Coefficient 0.7 Fireproof grade GB8624 2012 A / B1 Eco-protection grade E0 / E1 Installation aluminum keel and clips, wood frame, gun nail Certification BV,CE,SGS,ISO9001-2008 Test report Eco protction, sound absorption, flame retardant Model Type Specification NRC Punching Rate S30 M-KT-8-30-20-15 0.8 2.7% SL30 M-KT-8-30-20-15 0.8 2.7% S56 M-KT-8-56-20-15 0.85 2.8% SL56 M-KT-8-56-20-15 0.85 2.8% S100 M-KT-8-100-20-15 0.75 2.6% SL100 M-KT-8-100-20-15 0.75 2.6% S200 M-KT-8-200-20-15 0.8 2.5% SL200 M-KT-8-200-20-15 0.8 2.5%

Professional Combination Plier  120103  Type,  Combination Plier  Size. 6" / 150mm    7" / 180mm  8" / 200mm Material   55# Carbon Steel or Chrome Vanadium Steel  Suface treatment. Polish Finish  / Nickel Finish Handle Material.:  PP+PVC Certificate.: GS  Customers Logo: Sticker / Laser Printing  Package: Plastic Hanger / PP card  Sample Time: 3 days Delivery Time: Within 35 Days after Receiving the Deposit Payment Terms: T/T  ,L/C

It is mainly designed for handling of bulk materials in blocks, particles and irregular shapes, such as coke, big iron, steel scrap, slag, garbage and rock etc. It has been widely used in the ports , steel plants, and garbage treatment plants, with tower cranes, ship unloaders, traveling cranes and other type of cranes. The grab has its own hydraulic system, the key elements of which are of recognized brand imported abroad which ensure the high performance of the grab .It is simple in structure, easy to operation, high in performance. Safety protection: Overload protection system Main lifting motor with thermal protection Hooks with latch Rubber buffers Protective Place of Origin: Changshu, China (Mainland) Brand Name: ZDPM Material: Steel Color: As your requirement Dia of pulley: 445~880 Dia of rope: 24~52mm Lifting weight: 10~50t Volume: 1~30m³ Self weight: 4.5~30t Material density: 0.9~1.5t/m³ Lifting material: Bulk Structure: Single/double rope Control method: Remote/cabin/pendent control Warranty: 12months Certification: CE,3C,CNAS,SGS,BV Note: can be customized according to customer requirements.

Premises products used in residential buildings and office buildings (buildings of governments, enterprises and institutions, and commerce centers are added), connecting distribution optical cables to the cables connecting to the ONU. Based on optical access of different user groups, the project involves these products including optical distribution box, splice box, optical terminal box, fiber storage box, protection box, corridor optical cable, and drop cable. The fiber distribution hub completes functions such as optical cable inlet and fixing, fiber splicing and termination, optical splitter installation management, and drop cable coiling, storage, fixing, and splicing, and implements branch capacity expansion for the optical line. The optical fiber distribution box is used to connect to backbone optical cables and user access optical cables. It functions to distribute backbone optical cables and implements dispatching management. As a splicing device for FTTH, the splice box completes connection and distribution of backbone optical cables and subscriber optical cables. The optical terminal box is used to connect the optical cables of subscriber lines to optical fiber terminals and optical cables, and to implement functions such as optical cable inlet, fixing and stripping protection, fiber splicing and protection, and storage of pigtails or drop cables. The fiber storage box stores the drop cable before it enters the room. Fiber Distribution Hub Suitable for use in the network where optical splitters are distributed. It offers optical cable stripping and a fixing assembly, optical splitter module, splicing module, and storage area, completes the functions of optical cable inlet fixing, fiber splicing and termination, optical splitter installation management, and coiling, storage, fixing, and splicing of single-fiber drop cables, and implements optical splitting and capacity expansion of optical lines. Features 1. Material: non-metal 2. Integrated various optical splitter 3. Rotary distribution panel, double-layer cable management 4. Bow-type drop cable connector made in the field, redundant length cable storage inside 5. Smaller size under the same splitting port 6. Parking area for temporary storage of connectors 7. Applicable in multiple cables: drop cable, optical cable 8. Perfect fiber route design to ensure bend radius of fibers 9. Backbone optical cable is tap-off 10. Dust and splash proof: IP55(Outdoor) Fiber terminal Box An optical access device for FTTH, it can implement connection and distribution of backbone cables and subscriber cables. It is used in splicing (or mechanical splicing) and distribution of fibers. It is all wall mounted. Features 1. Two types: indoor and outdoor 2. Material: metal 3. Pleasant appearance 4. Available in SC, duplex-LC adapters 5. Lead in / out drop cables or fiber cable 6. Perfect fiber route design to ensure bend radius of fibers 7. Dust and splash proof: IP55(Outdoor) Splice Box As an optical access device for FTTH, it can implement connection and distribution of backbone cables and subscriber cables. It is all wall mounted, and can be used and maintained conveniently. Features 1. Corridor or light current well wall mounting 2. Plastic and rubber hub, pleasing appearance, small size, suitable for most applications 3. Bow-type drop cable can be spliced or mechanically spliced, and redundant length can be stored in the hub 4. Single bow-type drop cables fixed piece by piece, convenience for construction and maintenance 5. Applicable to tap-off application of backbone optical cables 6. Perfect fiber route design to ensure bend radius of fibers Smart Information Box Used for installation and management of Optical Network Unit (ONU) access in FTTH mode. It is applicable for household applications. Features 1. Plastic door frame and cover, pleasant appearance 2. Plastic bottom case (type-A box), metal bottom case (type-B box) 3. Removable door frame and door panel, convenient field construction and operation 4. Knock-down inlet holes on all sides of the box, convenience for routing 5. Type-A box for installing network distribution modules and telephone distribution modules 6. Type-B box for installing network distribution modules, telephone distribution modules, cable TV distribution modules and security modules Socket-outlet Features 1. Independent use 2. Quality Polycarbonate (PC ) material, with perfect fireproof performance 3. Allowing storage of a small quantity of redundant fibers

The data central office provides an equipment room for the broadband operator or ISP. The data switch, voice switch, video server and other value-added service devices are installed, and the Optical Line Terminal (OLT) is used to send diversified service signals to Optical Network Units (ONUs) of users through ODN. The ODN central office product is connected to the OLT and outdoor optical cable. The fiber capacity of equipment room becomes larger and larger as optical access is promoted gradually, and the equipment room of central office for scale construction of FTTx raises higher requirements for later-stage maintenance management and ODF density. To meet the large-scale optical access construction requirements of operators, we delivers the double-sided Optical Main Distribution Frame (OMDF) for facilitating patch cord management and the high-density Optical Distribution Frame (ODF) for improving the equipment room capacity and density. ODF frame cabinet system A frame suitable for central office and optical branch points. Easily configured with different modules to provide lead in, fixing and cross connection, splicing, storing and managing pigtails. Modules options include optical splitters, wave division multiplexers (WDM) as required by the customer. Features 1. Closed sheet-metal structure, accessible front/ rear side, rack-mount, 19'' 2. Modular design, high density, large capacity, space saving 3. Independent lead-in/out of optical cables, pigtails and patch cords 4. Layered fiber across unit, facilitating patch cord management 5.Optional fiber hanging assembly, double rear door and rear door panel assembly DDF frame system 1. The frame is made from special aluminum alloy and quality steel plate. The surface is tread with galvanization ,oxidization, plastics spraying etc. with the advantage of stable structure and pleasing appearance 2. The frame is fully closed structure with good performance of dust-proof and neat and pleasing appearance. 3. Module structure is adopter for flexible and convenient configuration and installation. 4. Rotary structure is selected for each unit plate. The unit plate can be rotated downward freely to facilitate the connection and maintenance of cable. 5. The frame is provided with perfect earth system. 6. The contact surface of coaxial connector is treated with gold plating so as to ensure contact and safety. 7. The gauge of the connector without test is only 13 mm. The capacity for same space. ODF Unit Box Splicing & termination module and fiber storage module are used for 19''/21'' standard rack-mounted integrated distribution cabinet, network cabinet and open frame, which integrates fiber cable fixing, stripping, splicing, terminating and patch cord storage and independently completes optical fiber splicing & termination. It can be configured with optical splitter tray to implement optical splitting and capacity expansion and is applicable to the network featuring centralized optical splitting in the equipment room of the central office. Features 1. Rack-mount, 19 inch 2. Lead in/out cables & fibers either left or right, applicable to ribbon or non-ribbon optical cables 3. Fully enclosed structure, no exposed patch cords, pleasing appearance and dust proof design 4. Incorporates NTM-B1 integrated splicing & termination tray 5. Available with SC, FC, duplex LC adapters 6. Optical cables fixing clamps 7. Optional storage tray to for redundant patch cords