1.        Rolling material: thickness 1.5-3.0mm, yield strength ≤G250MPa; 2.       Forming step: 18 steps; 3.       Machine structure: with Terri structure; 4.       Roller table design: with coaxial design, to reduce the unequal height of the two edges; 5.       8mm Roller material: GCr15 (bearing steel) with quenching treatment and surface chroming, the roller quenching hardness: HRC56°-62°; roller quenching depth: 8mm; 6.       Main shaft material: qualified 45Cr steel with heat treatment and surface hard chroming; 7.       Driving method: by hydraulic motor. Hydraulic station power: 22kw; 8.       Forming speed: 17-21m/min; 9.       Punching/cutting method: forming, punching , cutting; single hole + double holes 14X24; 10.  Material for punching Dies & cutting blade: Cr12Mov; 11.  Computer controlling system: industrial computer Siemens PLC system; Omron encoder; Schneider Electric, etc. 12. Main machine measurements: 10m×1.1m×1.5m (length x width x height);

I1. Specifications: applied to : Cold rolled steel, galvanized steel, hot rolled steel Tensile strength：δb≤450Mpa，δS≤280Mpa thickness：0.3-3.0mm width：500-2000mm（Max） coil ID:  φ508mm coil OD：φ1800mm（Max） weight ：15T（Max） diameter of leveling rollers: φ84mm distance of leveling rollers：90mm, material of leveling roller：GCr15,hardness:HRC55-60 total weight of machines：around 32T         a. diagonal tolerance：≤±1mm/2000mm length tolerance：≤±0.5mm/2000mm   a.  power ：380V/50Hz/3Ph   c.   d.  area of the whole production line(about) 24m(L)X8m(W)   f.   g.  color of the machines: grass green Ⅱ. Composed devices ■Hydraulic de-coiler ■Looper ■Servo precision straightening machine ■Transportation table ■Pneumatic stacker device ■Pneumatic system ■Electrical system

No. Name Unit Parameter 1. Control model PLC PLC frequency control 2. Applied to Mild steel (Soft)               and  High Tensile ( GI) 3. Thickness mm 0.5-3.0 4. Width mm 1270 5. ID mm Φ508 6. OD mm ≤1600 7. Coil weight Ton ≤5 8. Slitting blade shaft mm Φ180 9. Blade specification mm Φ320×Φ180×15 10. Material of blade 6CrW2Si 11. Power of slitter KW 30 12. Quantity of strips (Max) pcs 4 13. Width tolerance ≤±0.05 mm 14. Leveling roller diameter mm 65 15. Number of leveling rollers 70 16. Material of leveling roller GCr15 17. Material of cutter blade 6CrW2Si 18. Speed m/min ≤30 19 Length tolerance L=2m   ≤±0.5 20. Diagonal tolerance L=2m    ≤±1 mm 21. Power 380V/3PH/50HZ 22． Machine color White

If you want to develop new products,to get the exact data from experimentation is very important.You could adjustthe product configuration and technology,and speed up the development according to param eters gets from lab test.Data gets from experimentation is also a important reference for your item choice.Enlarge reaso-nably the lab test data,and it could be your basic parameters of industrial production.By this way,we avoid item choice mistake and reduce its risk. Characteristics ●Frequency stepless speed control, digital display ●Basket can be made of polymer material, solvent-proof, and white material won’t change color while milling. ●Basket can be dismantled, convenient to clean

Electric Stacker Model designation ES16 ES16-H ES20 Controller Curtis AC Curtis AC Curtis AC Rated capacity kg 1600 1600 2000 Lift height mm 3000 4600 3000 Free lift mm 100 1594 100 Height, mast lowered mm 1981 2086 1981 Height, mast extended mm 3397 5102 3397 Fork length mm 1150/1220 1150/1220 1150/1220 Fork width mm 540/685 540/685 540/685 Aisle width, 1000x1200 pallets crossways mm 2452 2503 2452 Aisle width, 800x1200 pallets lengthways mm 2432 2480 2432 Turning radius mm 1570 1620 1570 Drive motor output (60 min. rating) kw 1.5 1.5 1.5 Lift motor output (15% rating) kw 2.5 3.0 2.5 Battery voltage (5h) V/Ah 24/210 24/240 24/210 Service weight kg 1065 1270 1090

Electric Pallet Trucks Model designation EPT20 EPT25 EPT30 Controller Curtis AC Curtis AC Curtis AC Rated capacity kg 2000 2500 3000 Fork length mm 1150/1220 1150/1220 1150/1220 Fork width mm 540/685 540/685 540/685 Fork height, lowered mm 85 85 85 Fork height, lifted mm 200 200 200 Turning radius mm 1746 1746 1746 Drive motor output (60 min. rating) kw 1.5 2.0 2.5 Lift motor output (15% rating) kw 0.8 1.5 1.5 Battery voltage (5h) V/Ah 24/210 24/240 24/210 Service weight kg 810 830 850

Reach Trucks Model designation RT15 RT15-H RT20 Controller Curtis AC Curtis AC Curtis AC Rated capacity kg 1500 1500 2000 Lift height mm 3000 4500 3000 Reach distance mm 500 500 500 Height, mast lowered mm 2121 2080 1990 Height, mast extended mm 4040 5512 3870 Fork length mm 950/1150 950/1150 1070 Fork width mm 200-740 200-740 200-715 Aisle width, 1000x1200 pallets crossways mm 2790 2750 2892 Aisle width, 800x1200 pallets lengthways mm 2840 2800 2950 Turning radius mm 1670 1670 1670 Drive motor output (60 min. rating) kw 1.5 1.5 2.5 Lift motor output (15% rating) kw 3.0 3.0 3.0 Battery voltage (5h) V/Ah 24/270 24/400 24/280 Service weight kg 1840 2110 2430

Diesel Forklifts Model designation FD20 FD25 FD30 FD35 FD40 Engine ISUZU ISUZU ISUZU ISUZU ISUZU Rated capacity kg 2000 2500 3000 3500 4000 Load center mm 500 500 500 500 500 Lift height mm 3000 3000 3000 3000 3000 Overhead guard(cabin) height mm 2150 2150 2160 2160 2230 Height, mast lowered mm 2060 2060 2060 2060 2190 Height, mast extended mm 4220 4220 4265 4265 4270 Fork size mm 1070x122x40 1070x122x40 1070x125x45 1070x125x50 1070x150x50 Turning radius mm 2220 2240 2400 2550 2800 Overall length mm 2510 2540 2700 2850 3035 Overall width mm 1160 1160 1226 1226 1400 Service weight kg 3530 3880 4350 4560 5300

1.CNC bending machine with streamlined design,high speed,high precision,high rigidity. 2.Electro hydraulic servo system,full loop controlling the synchronization of the upper slider. 3.Mechanical compensation on the crowing of worktable and deformation compensation on throat,ensuring good bending strength and precision 4.Backgauge is driven by digital AC servo motor,moved with ball screw,guided by linear guide 5.Muti-axis can be optional (3+1、4+1、6+1、8+1） 6.Many CNC control system can be choose