Products Features 1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Perfect breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Whole heat recovery/partial heat recovery 4.Pump control 5.Special power supply 6.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% The unit uses high efficiency heat exchanger with advanced, unique shape design and systems. Units can be installed directly on the roof, or other well-ventilated place outdoors, without a separate room, space saving construction. Compact shape, appearance, unit uses “W” type coil design, space utilization, small unit size, in order to adapt to the outdoor weather conditions to ensure that the unit has a good operating results during the life cycle. Friendy choose to use environmentally R407C, R134A or R410A refrigerant ect. There may be change of the dimensions without pre notice. For accurate you are welcome to ask us for installing drawing.

Products Features 1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. 5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Pump/Cooling tower control 4.Special power supply 5.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Condenser: fouling factor 0.044m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% Compressor Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise. Heat exchanger The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%. Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit. PLC A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function.

Products Features 1.Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. 5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Pump/Cooling tower control 4.Special power supply 5.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Condenser: fouling factor 0.044m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% Compressor Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise. Heat exchanger The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%. Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit. PLC A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function. Application Chemical, chemical fiber, plastic, oil, food, pharmaceutical, military, printing, painting, electroplating, electronics and other industries

Products Features 1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. 5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Pump/Cooling tower control 4.Special power supply 5.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Condenser: fouling factor 0.044m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% Compressor Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise. Heat exchanger The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%. Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit. PLC A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function.

Products Features 1.Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. 5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Pump/Cooling tower control 4.Special power supply 5.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Condenser: fouling factor 0.044m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% Compressor Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise. Heat exchanger The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%. Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit. PLC A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function.

Products Features This series chiller lowest outlet water temperature can reach -80℃. Low temperature and super low temperature chiller is our technical staff after decades of experience in the designing of middle low temperature chiller, learned domestic and abroad experience, has the advantages of high efficiency, energy saving and environmental protection, high reliability etc.. 1. Wide temperature range: refrigerant temperature range is -35~-80℃. 2. High reliability: the semi hermetic screw compressor, improve the efficiency of the compressor operation, while avoiding the open type compressor leak, reducing refrigerant add and seal replacement, upgrade products for many years running. 3. Full automatic control: the use of advanced SIEMENS PLC control technology to achieve full automatic operation. 4. Energy-efficient: The use of semi hermetic screw compressor with economizer operation, improve the operation efficiency, at the same time, low temperature and intermediate level using efficient imported heat exchanger, to ensure that the unit load and full load can be efficient and energy saving operation 5. Energy regulation: mahcine can realzie 4 level 25-50-75-100% and 25%~100% stepless regulation. 6. Professional and technical energy saving operation scheme: according to the different requirements of customers, we can customize the freezing technology for customers, to provide the appropriate professional products.

Feature • Stripping the insulation layer of cable from Φ 15 mm to Φ 30 mm. • Stripping thickness could be adjusted. • Don’t keep the knives reach CU/AL core during stripping. • Blades can be resharpened or exchanged. • Product supplied with plastic box. • Size: 290*80*55 mm • Weight: 0.69 kg Parameters Model BX-30 Capacity Range The insulation layer of cable from Φ 15 mm to Φ 30 mm Size 290*80*55 mm Weight 0.69 kg Application Our cable tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Feature • Stripping both insulation and semiconductor layer of cable from Φ 15 mm to Φ 40 mm. • Stripping thickness could be adjusted. • Don’t keep the knives reach CU/AL core during stripping. • Blades can be resharpened or exchanged. • Product supplied with plastic box. • Size: 245*87*55 mm • Weight: 0.65 kg Parameters Model BX-40 Stripping  Capacity The both insulation and semiconductor layer cable from Φ 15 mm to Φ 40 mm Size 245*87*55 mm Weight 0.65 kg Application Our cable tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Feature • Stripping both insulation and semiconductor layer of cable from Φ40 mm to Φ90 mm. • Stripping thickness could be adjusted. • Don’t keep the knives reach CU/AL core during stripping. • Blades can be resharpened or exchanged. • Product supplied with plastic box. • Size: 510*150*90 mm • Weight: 2.47 kg Parameters Model BX-90 Stripping Capacity Stripping both insulation and semiconductor layer of cable from Φ40 mm to Φ90 mm. Size 290*80*55 mm Weight 0.69 kg Application Our cable tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Catalogue Download Feature • Hexagon /round crimping type for swaging or fishing terminals. • Dies could be OEM as per different terminals sizes, like round is welcome too. • C shape head design for convenient operation. • Head could be rotated 180 degree. For flexible operation in confined place. • Fitted with safety valve. When pressure reach to limited max pressure,s afety-value will release pressure automatically, which prevent over pressure. • Standard nine set of dies, include 4 6 10 16 35 50 70 Parameters Model HP-70CW Terminal Type wire rope fishing/swaging terminals Crimping Capacity Steel wire ropes Φ1-8mm Output 5 T Ram Stroke 12 mm Length/Weight 305mm /1.6kg Application Our cable crimper mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Feature • Hexagon crimping type • Trigger Switch: Make ram advance by pressing it. Pressure can be hold when loose trigger switch • Manual Retraction Button: Dies can be retracted with ram by pressing retraction button for checking or adjusting during operation • Automatic Retraction Function: Dies automaitcally retract with ram once crimping is completed • Powerful Motor: ensure quick and efficient crimping • LED illuminates working area for easy operation • C-Shape 180 degree rotatable head for easy cable insertion and flexible operation in confined place • Automatic Motor Stop Function extremely save power • 18v Li-ion Battery with high capacity and require short charging time • Plastic Case Package for easy carrying case Parameters Model EMT-300C Crimping Capacity 16-300mm² Output 12T Ram Stroke 30mm Battery Voltage 18V Battery Capacity 3Ah Charging time 2 hours Size 380*77*340mm Weight 7.0kg Accessories 11 Dies, 2 Battery,1 shoulder strap, 1 Charger, 1 Plastic Case Application Our hydraulic tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Feature • Hexagon crimping type with 360 degree rotation. • Lock type head. • Trigger Switch: Make ram advance by pressing it. Pressure can be hold when loose trigger switch • Manual Retraction Button: Dies can be retracted with ram by pressing retraction button for checking or adjusting during operation • Automatic Retraction Function: Dies automaitcally retract with ram once crimping is completed • LED illuminates working area for easy operation • Powerful Motor: ensure quick and efficient crimping • Ergonomic design for one hand operation • Li-on lower power weight ratio with 50% more capacity and shorter charging cycles • Plastic Case Package for easy carrying case Parameters Model HL-300 Crimping Capacity 10-300mm² Output 6T Ram Stroke 17mm Battery Voltage 18V Battery Capacity 3Ah Charging time 2 hours Size 420*77*350mm Weight 4.8kg Accessories 12 Dies, 2 Battery, 1 shoulder strap, 1 Charger, 1 Plastic Case Application Our hydraulic tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.