Feature • Flip-top latch type head • Head could be rotated 180 degree .For flexible operation in confined place. • Tools are set by double speed. Quick speed while dies have not connected with lug. Slow speed while dies touched lug. Two speed for save your labor and time. • Fitted with safety valve. Automatically relief working pressure when complete crimping. • Plastic case package is for easy carrying and well tool protection Parameters Model CPC-20A Cutting Wire Type Cu/Al cable, wire rope, wire standard. Cutting Capacity Max Φ20mm Output 5.5 T Length 420 mm Weight 3.14 kg Application Our hydraulic tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Feature • Flip-top latch type head • Head could be rotated 180 degree,For flexible operation in confined place. • Tools are set by double speed. Quick speed while dies have not connected with lug. Slow speed while dies touched lug. Two speed for save your labor and time. • Fitted with safety valve. Automatically relief working pressure when complete crimping. • Plastic case package is for easy carrying and well tool protection Parameters Model CPC-20AF Cutting Wire Type Cu/Al cable, wire rope, wire standard, round bar Cutting Capacity Max Φ20mm Output 5.5 T Length 380 mm Weight 3.2 kg Application Our hydraulic tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Feature • Dies sets could matched with hydraulic tools. • With high quality for tools steel. • Dies could be OEM. • Package: with plastic carrying case. Parameters Model MAP-60 Stainless Steel plate Max thickness 2.0mm Mild steel plate Max thickness 3.0mm Weight 2.8kg Included Dies Set: Round Dies 1/2” (Φ21.8mm) , 3/4”(Φ27.6mm),  1”(Φ34.1mm),  1 1/4”(Φ42.7mm),  1 1/2”(Φ48.7mm),   2”(Φ60.2mm) Application The knockout punching tools main work for switch board, distribution box and electrical working, State Grid construction, underground cable construction, Building construction etc.

Introduction The iFSim.FTD.A320 consists of visual display, flight cockpit and instruction station and it is built on the high fidelity and reliability, which has been through high frequency test. It is ideally suited to meet training requirements of beginners and surpass enthusiasts’ home-build requirements. 1:1 Flight Simulator The flight simulator is a full scale representation of the A320 cockpit layout and covers the various primary sections including: sidesticks, rudder pedals, throttle, main instrument panel, FCU, pedestal, PFD/ND, E/WD, SD, MCDU and Overhead panel, with operational buttons、knobs and switches in the same positions as they are in actual aircraft. Instructor Station Instructor Station is an intuitive lesson plan builder and it contains 3D map of airplane flight path with special event setting function. It integrates information for easier access to advanced functions and utilizes touch screen for easy use. Computer system: Main Flight Simulator Computer * Processor: Intel® Core i7-7700K * RAM: 32 GB * Solid State Drive * Graphic cards: GIGABYTE 1060 * Extensions: 1 HDMI, 2 DVI IOS * Processor: Intel® Core i5-6600K 3.5 GHz (3.9) socket 1151 * integrated graphics. * RAM: 16 GB * Extensions: 8 USB CS/FO/SD * Industrial Personal Computer * J190 * RAM: 4 GB * Solid State Drive: 64 GB Monitor (24 inches) 2 x Bluetooth mouse and keyboard Two Replica seats: * 1:1 scale replica * Tilt adjustable backrest. * Adjustable lumbar area and seat height. * J-Rails with adjustable displacement. * Height adjustable backrest. * Strong steel construction, powder coated. * Headrest. * Folding and height adjustable armrests. * Life vest bag. Visual System and Beamers: Recommended: 180 degree POV * Our multichannel Flight simulator panoramic view configuration are design to be controlled with 3 High Definition short throw beamers from the main Flight simulator computer. It is one large stretched forward view. The final projected image will result in a panoramic 180 degree view without a real right and real Left flight simulator views. 3 x Recommended Beamers *1920 x 1200 resolution. *5000 ANSI lumen. Merge Software (dongle included) 3 x Projector hang stick 2 x Inside Screen (17.3 inches) Inside Screen (21.5 inches) Professional metal FTD shell with polyester interior panels: *Cockpit frame, including Acrylic MIP Panel. *Rudder pedal *Cockpit base *Overhead Panel *FCU frame and cover *Pedestal *Sidesticks *tillers Overhead panel: *ADIRS *Left Including ground proximity arming/ Oxygen system/Wiper *Right Including flight control computer/ Cargo smoke detection *Fire alarm *Hyd-fuel *Elec *Aircond *Light *PSU Kit Overhead AFT: *Left/Right reading *Breaker *Maintain *Mid Pedestal: *MCDU CS *MCDU FO *RMP CS *RMP FO *Flood CS *Flood FI *WX Radar *ACP CS *ACP FO *ATC *ECAM *TQ *Spoiler *Data Loader *Rudder Trim *Flaps *Rprinter MIP: *EFIS control CS *EFIS control FP *ABRK *ISIS *T-Gauge *T on ND *LDG FCU: *FCU *Wing CS *Wing FO Other: *Distribution Box *Computer cabinet (1200mm) *2 x Sound *3 x HDMI video cable (1.5m) *VGA video cable (5m) *2 x USB Hub *18 x USB cable (7 x 1m，4 x 2m, 7 x 3m, 1 x 4m) *5 x Internet cable (1 x 4m, 3 x 2m, 1 x 1m) Dimensions: Cockpit Platform with cockpit shell. * Length: 5.2m * Width: 4.65m * Height: 2m Minimum recommended Space incl. visuals: 6m *4.8m*3m Production time: 12 weeks

Introduction The iFSim.FTD.B737 consists of visual display, flight cockpit and instruction station and it is built on the high fidelity and reliability, which has been through high frequency test. It is ideally suited to meet training requirements of beginners and surpass enthusiasts’ home-build requirements. 1:1 Flight Simulator The flight simulator is a full scale representation of the B737 cockpit layout and covers the various primary sections including: yokes, rudder pedals, throttle, main instrument panel, FCU, pedestal, PFD/ND, E/WD, SD, MFC and Overhead panel, with operational buttons、knobs and switches in the same positions as they are in actual aircraft. Instructor Station Instructor Station is an intuitive lesson plan builder and it contains 3D map of airplane flight path with special event setting function. It integrates information for easier access to advanced functions and utilizes touch screen for easy use. Professional metal Floor Platform: * Industrial high quality wheels in robust modular structure. * Produced in galvanized strong quality steel. * High quality welds. * Dual linked Yokes can be installed on our specially pre-cut floor. Professional metal FTD shell with polyester interior panels: * Special designed: 90% of the structure can be mounted by a single person. * Full B737NG flight simulator made of steel, fiberglass interior panels and aluminum. * Sturdy and professional powder coating metal construction. * M4 bolts (included) can assemble the parts easily. Professional B737NG MIP Panel: * 2 x VGA LCD monitor Philips 18.5" (PFD+ND captain and officer). * 1 x VGA TV/LCD monitor 16" (upper DU). * 1 x VGA LCD monitor 10" (lower DU). * 1 x Mount adapters for 16" monitor. * 1 x Mount adapter for 10" monitor to fit it to the pedestal. * 1 x Acrylic window for adapt 10" monitor for the lower DU * Metal CDU Bay. * Metal MIP lateral stands. * Metal landing gear Lever. * Full Metal MCP/EFIS bracket and glare shield frame. * 1:1 scale MIP panel replica completely Backlit. * Full Metal MIP panel and support frame. * Windows frame for Captain, Central, FO and CDU Bay * Cover for Landing gear window. * Full adjustable VESA Displays support. * All necessary electronic circuit boards and connections cables. * All necessary LEDs, annunciators, switches, caps and knobs. * Plastic glare wings and covers. * MCP panel version 3 * 100 % operational Flaps, Brake pressure and yaw damper instruments gauges. * Fully operative AFDS panels, N1 SET and Speed REF knobs. * Integrated Backlight panels * Steering Tiller. * Dual Digital Chronometers. * Caution and Fire Warning switches and six pack modules. * 2 x EFIS modules. * Color display CDU’s * USB Dim control card. Professional B737NG Pedestal: * 1:1 scale FWD Overhead panel replica with complete Backlighted. * Robust aluminum Pedestal Bay with all the external details. * 2 x Radios COM. * 2 x Radios NAV. * 2 x Radios ADF. * 2 x Panels AUDIO. * Stab Trim and cabin Door panels. * Lighting control panel. * Closing panels. Transponder panels. * Fire panel. * Cargo fire panels. * Radar panels. * Rudder Trim panel. Dual linked Rudder Pedals: * Full Metal 1:1 scale B737NG Rudder pedals replica. * Linkable with other pedal unit. * Assembled and fully tested at our facility. * Any other software is not needed to connect, calibrate and use. * Extra protective Paint layer. * Rudder and differential brakes functional 12 bits axes electronic card. Motorized Throttle quadrant: * 1:1 scale replica of the B737NG Throttle quadrant complete Backlighted. * Contains 98% Aluminum and Steel. * Motorized Thrust Levers with electrical and mechanical slip clutch. * Motorized SPD BRK. * Motorized Flight Detent. * Motorized SPD Brake Down lock. * Motorized Trim Indicators. * Motorized Trim Wheels. * Motorized Trim Indicators. * Motorized Parking Brake unlocks system. * Mechanical Trim Sound. * Parking Brake Indicator Light. * Motorized Parking Brake Lever. * Cut Off Levers. * A/T switches. * TO/GA switches. * Main/Elec. switch. *“toe brakes unlock system”of Parking Brake lever * A/P switch. * Horn Cut-off Switch. * Flap Lever with Flap lever protection gates at positions 1 and 15. * The Reverser levers locked until Throttle levers are at idle, also the Thrust levers remains locked until the Reverser levers are completely down. * Safeguard for switch (Stab Trim) * Stabilizer Trim * Variable Stab Trim wheel speed. * Stab Trim wheels can also be manually operated. * For the drive of the trim wheel are used 3 Motor for maximum efficiency. * Stab Trim cutout switches (MAIN/ELEC and AUTOPILOT) * Retractable Trim wheels handles. * Mechanically linked Stab Trim indicators to the wheels. * Speed brakes: * Motorized Speed Brake lever. * Electronic and mechanical detent Flight Detent positions. * Miscellaneous: * Onboard Internal power supply. * Left and Right side Map/Charts Holders. * Ethernet connection. * Programmable Horn Cutout button. Two B737NG Replica seats: * 1:1 scale replica * Tilt adjustable backrest. * Adjustable lumbar area and seat height. * J-Rails with adjustable displacement. * Height adjustable backrest. * Strong steel construction, powder coated. * Headrest. * Folding and height adjustable armrests. * Life vest bag. Full Operative Forward Overhead panel: * 1:1 scale replica of the B737 FWD Overhead panel complete Backlighted. * Motorized Engines start switches. * Cabin pressure display (orange digits) * Heavy duty metal frame. * Full operational indicator and instruments gauges. * Backlighted panels and instruments gauges. * AC/DC panel displays (green digits) * Three automatic dim-light levels on blue indicators. * Aluminum caps switches. * Weight: 30 kilograms. Dual linked yokes: * Full metal 1:1 scale B737NG Yoke replica. * Sturdy steel construction, powder coated. * Full operative dual Trim, AP disconnect switches and MIC. * High quality replica full metal Chart Clipboard. Full Operative AFT Overhead panel: *1:1 scale replica of the B737 AFT overhead panel complete Backlighted. * 100% functional LE Devices and IRS panel. * Heavy duty metal frame. * Aluminum caps switches. * Full operational indicator and instruments gauges. * Backlighted panels and instruments gauges. * IDC Audio Panel. * Durable knobs. * Module size: 66x34x11 Cm. 15Cm depth aprox, with IOCards & components. * Screw DZUS in all panels. Visual System and Beamers: Recommended: 180 degree POV * Our multichannel Flight simulator panoramic view configuration are design to be controlled with 3 High Definition short throw beamers from the main Flight simulator computer. It is one large stretched forward view. The final projected image will result in a panoramic 180 degree view without a real right and real Left flight simulator views. Recommended Beamers: 3 *1920 x 1080 Full HD resolution. *6000 ANSI lumen. *10.000:1 contrast ratio. Dimensions: Cockpit Platform with cockpit shell. * Length: 5.2m * Width: 4.65m * Height: 2m Minimum recommended Space incl. visuals: 6m *4.8m*3m

Feature • It contain hydraulic punch driver. • With the help of hydraulic system, making holes by hand become fast and easy. • Die could be OEM. • Plastic case package for easy carrying and well tool protection. • Hole set include: 1*pump（CP-180）,1*hydraulic ram,2*draw stud, 1*spacer,1*oil pipe,6*dies set, Parameters Model SKP-8 Stainless Steel plate Max thickness 1.6mm Mild steel plate Max thickness3.2mm Output 8.9 T Oil Capacity 40CC Working Pressure 600bar Ram Stroke 25 mm Weight 5.4kg Included Dies Set: Round dies 1/2” (Φ21.8mm) , 3/4”(Φ27.6mm),  1”(Φ34.1mm),  1 1/4”(Φ42.7mm),  1 1/2”(Φ48.7mm),   2”(Φ60.2mm) Application The knockout punching tools main work for switch board, distribution box and electrical working, State Grid construction, underground cable construction, Building construction etc.

Feature • It contain hydraulic punch driver. • With the help of hydraulic system, making holes by hand become fast and easy. • Die could be OEM. • With round dies MAP10-4, punching capacity can be reached 4” (MAP10-4 Dies sizes: 2 1/2”(Φ76.1mm), 3”(Φ88.9mm) , 3 1/2”(Φ102.8mm) 4”(Φ115.5mm) • Plastic case package for easy carrying and well tool protection. • Hole set include: 1*pump（CP-180）,1*hydraulic ram,2*draw stud, 1*spacer,1*oil pipe,6*dies set. Parameters Model SKP-15 Stainless Steel plate Max thickness 1.6mm Mild steel plate Max thickness3.2mm Output 15 T Oil Capacity 55CC Working Pressure 600bar Ram Stroke 25 mm Weight 6.2kg Included Dies Set: Round Dies 1/2” (Φ21.8mm) , 3/4”(Φ27.6mm),  1”(Φ34.1mm),  1 1/4”(Φ42.7mm),  1 1/2”(Φ48.7mm),   2”(Φ60.2mm) Square Dies 32*32mm Application The knockout punching tools main work for switch board, distribution box and electrical working, State Grid construction, underground cable construction, Building construction etc.

Catalogue Download Feature • One hand operation, rebar bar could be tried quickly and safety • Simple and easy operation, work automatically • Powered by the rechargeable battery. • Tying could be completed by putting the jaw onto the crossed-rebar and pulling the trigger only. • Carrying plastic case supplied well protection. Parameters Model WL-210 Tying Capacity Max Φ21mm Battery 9.6V Ni-Mh 3000mAh Voltage 110-240V, 50/60Hz Number of Tying Knots: 1200Pcs (one Ni-Mh battery) Charger 1hours for full charge Size 418×408×162mm Weight 7.5kg Accessories 1Pc Rebar tier machine, 2Pc Battery pack 1Pc Quick charger, 4Pcs of steel wire rolls 1pc of Inner Hexagon Spanner, 1pc of Sharp Nose Pliers Wire Type galvanized steel wire Application Our tying machine mainly used for Building construction, steel plants, railroads, bridge construction, oil & gas etc.

Catalogue Download Feature • Machine includes rollers and collars of various size for use on different diameters of rebar. • Ideal for builders, contractors and manufacturers who require a simple to use, consistently accurate rebar bending machine onsite or in the shop. • Eliminates injuries and worker fatigue caused by manual rebar bending. • Emergency stop and flush mounted star buttons are included for added safety. • Motor runs quietly (low noise) and is only on while bending is in progress, preventing unnecessary wear Parameters Model RNB-32 Bending Capacity Φ6 - 32mm Bending Speed 6.0 s Voltage 220V/110V Wattage 1350W Machine size 560*260*200mm Weight 24kg Application Our tying machine mainly used for Building construction, steel plants, railroads, bridge construction, oil & gas etc.

Catalogue Download Feature • This RB-25 Electric Rebar Bending Machine includes rollers and collars of various size for use on different diameters of rebar. • Ideal for builders, contractors and manufacturers who require a simple to use, consistently accurate rebar bending machine onsite or in the shop. • Preset angle locks for repeating the same angle bend.The two slide-type angle selectors can be set to accurately bend any angle from 0-180degrees.two standard foot pedal control switch for hands-free bending • Eliminates injuries and worker fatigue caused by manual rebar bending. • Emergency stop and flush mounted star buttons are included for added safety. • Motor runs quietly (low noise) and is only on while bending is in progress, preventing unnecessary wear. • Package: One pc/ Cardboard  Ctn/Metal Box • Certificate: CE ROHS Parameters Model RB-25 Voltage 220V/110V Wattage 1600W/1700W Gross weight 109kg Net weight 91kg Bending Angle 0°-180° Max.rebar 25mm Min.rebar 6mm Carton size 500x555x505mm Machine size 450x500x440mm Application Our tying machine mainly used for Building construction, steel plants, railroads, bridge construction, oil & gas etc.

Catalogue Download Feature • Machine includes rollers and collars of various size for use on different diameters of rebar. • Ideal for builders, contractors and manufacturers who require a simple to use, consistently accurate rebar bending machine onsite or in the shop. • Preset angle locks for repeating the same angle bend. The two slide-type angle selectors can be set to accurately bend any angle from 0- 180 degrees. two standard foot pedal control switch for hands-free bending • Eliminates injuries and worker fatigue caused by manual rebar bending. • Emergency stop and flush mounted star buttons are included for added safety. • Motor runs quietly (low noise) and is only on while bending is in progress, preventing unnecessary wear. Parameters Model RB-32 Bending Capacity Φ6 - 32mm Bending Angle 0°- 180° Voltage 220V/110V Wattage 3000w/2800w Machine size 600x580x470mm Weight 175kg Application Our tying machine mainly used for Building construction, steel plants, railroads, bridge construction, oil & gas etc.

Catalogue Download Feature • This Rebar Bending and Cutting Machine, combination cutting and bending function, improved the processing efficiency of steel bar/rebar. • Portable rebar bender is widely used in construction engineering for bending rebar, steel bar, steel rod etc. • easy maintenance, it can preset the bending angles from  angle allocator • Rebar Cutting Machine with Hydraulic drive, foot switch control operation, with 5 seconds any angle. The two side type angle selector can be set to accurately bend any angle from 0-180 degrees. • RBC-25 Portable Rebar Bending and Cutting Machine used for bending 6mm-25mm rebar, cutting 4-25mm rebar. Parameters Model RBC-25 Bending Capacity Φ6 - 25mm Cutting Capacity Φ4 - 25mm Bending Angle 0°- 180° Voltage 220V/110V Bending wattage 1600W/1700W Cutting Wattage 1300W/1440W Machine size 470*470*1000mm Weight 145 kg Application Our tying machine mainly used for Building construction, steel plants, railroads, bridge construction, oil & gas etc.