Products Features Capacity: 45~105kw. Efficiency: 2.7~3.3 cop. Warranty: Compressor- 3 years limited. other parts-1 year limited. Structure Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance toatmospheric agents. Direct expansion coils with condensate drain tray. Hermetic compressor High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,mounted on rubber vibration dampers Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise Centrifugal fan Forward curve centrifugal fans for air treatment section and axial fans for condensation section. Front, side and underside air discharge of the treatment unit. High external pressure, long air supply distance Electric panel Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components. Easy operation line controller Cooling/Heating/Auto. Error indication. Timing on/off. Product options Economizer with fresh, return air dampers and fresh air hood. Free cooling function for low ambient temperature. Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C BMS devices. T3 (Tropical climate). Condenser coil guard. Roof curb. Metal / aluminum filter. Air pressure switch for indoor fan. High static condenser fan option with sealed + drain.condensing section. Optional water heating coil. Metal or plastic mesh on condenser coil. Optional supply / return air configurations. Upgraded evaporator fan motor drives. G4 filter, plate and bag filter.

Products Features 1.Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Perfect breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Whole heat recovery/partial heat recovery 4.Pump control 5.Special power supply 6.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% The unit uses high efficiency heat exchanger with advanced, unique shape design and systems. Units can be installed directly on the roof, or other well-ventilated place outdoors, without a separate room, space saving construction. Compact shape, appearance, unit uses “W” type coil design, space utilization, small unit size, in order to adapt to the outdoor weather conditions to ensure that the unit has a good operating results during the life cycle. Friendy choose to use environmentally R407C, R134A or R410A refrigerant ect. There may be change of the dimensions without pre notice. For accurate you are welcome to ask us for installing drawing.

Products Features 1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. 5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Pump/Cooling tower control 4.Special power supply

Products Features 1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Perfect breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Whole heat recovery/partial heat recovery 4.Pump control 5.Special power supply 6.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% The unit uses high efficiency heat exchanger with advanced, unique shape design and systems. Units can be installed directly on the roof, or other well-ventilated place outdoors, without a separate room, space saving construction. Compact shape, appearance, unit uses “W” type coil design, space utilization, small unit size, in order to adapt to the outdoor weather conditions to ensure that the unit has a good operating results during the life cycle. Friendy choose to use environmentally R407C, R134A or R410A refrigerant ect. There may be change of the dimensions without pre notice. For accurate you are welcome to ask us for installing drawing.

Products Features 1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time. 2.Four stage volume control or 0%-100% automatic regulation. 3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace. 4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection. 5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements. Product options 1.Salt water evaporator 2.Stepless energy regulation 3.Pump/Cooling tower control 4.Special power supply 5.Remote communication connector Product specfication Refrigerant: R22/R407C Evaporator max water pressure drop: 1.0Mpa Evaporator: fouling factor 0.018m2.℃/KW Condenser: fouling factor 0.044m2.℃/KW Power supply: 380V/3P/50Hz Allowable voltage fluctuate: ±5% Allowable frequency fluctuate: ±2% Compressor Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise. Heat exchanger The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%. Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit. PLC A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function.

The cyc children's book printing company is one special company focus on the bath book, floating bath book, baby bath book, pvc bath book, waterproof book, sponge book, etc. As long as you could not find the right design, you can contact us for the new book developing. Q: It can floating on the water, right? A: yes, dear friend! The Princess fancy Pants Children Print Floating Bath Book could float on the water, like a ship float on the water. Could sail to sea. It is very good designing, also the ideal printing color and illustration content. Size 18.5 x 15.6 cm Page 8 pages Materials 100% recycle EVA + Sponge Package each put into polybag with header card MOQ 3000 copies / title Approx Unit Price $0.6~1.10 Sample Cost $125 ~ $250 Sample Lead Time 15 days Mass Production Lead Time 30~45 days Shipping Term FOB Shanghai, China /  CIF destination Port Payment Term T/T,  T/T+L/C

This children book design is very novelty. The children book design by the 8 page book together with the cartoon dolphin attached to the cover of the book. The children book are warm welcome by the children, each year have over 50,000 copies sales in the world. As long as you have the custom inquiry about the children book pls email to caroline@childbookprinting.com. The cyc company also have the children book of bath book, the bath time book, the bed time book, the playing book, the novelty book and the cloth book and fabric book. Q: Is the book special for the attached character, right? A: Yes, you are right! The Pumping dolphin childrens print bathtime books have its outstanding feature is the cartoon attached to the cover. Q: How much of the Pumping dolphin childrens print bathtime books? A: It much depend on your order quantity. Such as we request 3000 piece per title Pumping dolphin childrens print bathtime books, the cost around $0.85. However if you have bigger quantity, the price definitely much drop. Size 16 x 16cm Page 8 pages Materials 100% recycle EVA + Sponge Package card paper boxes + clear PVC cover MOQ 3000 copies / title Approx Unit Price $0.6~1.10 Sample Cost $125 ~ $250 Sample Lead Time 15 days Mass Production Lead Time 30~45 days Shipping Term FOB Shanghai, China /  CIF destination Port Payment Term T/T,  T/T+L/C

860001  Electric Circular Saw For Wood Cutting  185MM Application. Wood Cutting Saw Max Cutting Capacity : 65mm Rated Voltage : 230V Rated Frequency 50Hz Input power 1400W Variable Speed: 4500r/min Disc diameter: 185mm Max cutting capacity : 90 degree ：64mm 45 degree :  42mm Accessories: 1pc blade for wood Cable 2M   VDE Certificate CE/GS/EMC/ROHS/FFU GOOD Package: Color Label / Color Box Sample Time: 3 days Delivery Time: Within 35 Days after Receiving the Deposit Payment Terms: T/T  ,L/C

Item Description Unit SLL50 Process Range Max. swivel diameter of spindle over bed mm 560 Max. swivel diameter of spindle over saddle mm 280 Max.machining diameter mm 480 Max. machining length mm 290 Spindle Chuck diameter mm φ254 Spindle nose model - A2-8 Taper of spindle bore - 1:20 Max. speed rpm 3000 Motor power Kw 15/18.5 Travel X axis travel mm 260 Z axis travel mm 700 Feed rate X/Z axis rapid shift m/min 18/24 Max. Cutting feed rate m/min 10 Tool turret Qty. Of tools pcs 8(12 optional) OD tool size mm 25*25 Boring tool handle diameter mm φ32 Tool changing time (adjacent/far) sec 0.68/1.5 Tailstock Shaft diameter of tailstock mm 95 Center taper - MT5 Center travel mm 120 Tailstock travel mm 650 Motor X/Y/Z motors Kw 3 Cooling pump motor Kw 0.4 Precision Positioning precision mm X/Z：0.01/0.12 Repetitive positioning precision mm X/Z：0.005/0.006 Reverse difference mm X/Z：0.006/0.012

Parameters Unit GDMC2560-5M Table size 6000*2500 Table load kg/m2 2000 T-slot size（width x nos.） mm 28*13 X travel mm 6500 Y travel mm 3800 Z travel mm 1000 W travel mm 2000 Width passed the gantry mm 3000 Distance from spindle nose to table surface mm 150～2600 Spindle nose — ISO №50 Main motor power（cont/30min.） kW SIEMENS：37/51 FANUC：37/45 Max. Speed of spindle rpm 3000（6000 optional） Max. Output torque of spindle Nm 1600 Dia. Of spindle mm Φ120 Max. axial force of spindle N 32000 Cutting feed speed mm/min 5000 Rapid speed X、Y、Z m/min 10 W m/min 5 Type of tool magazine Mechanical arm Type of tool handle BT-50、JT-50 Magazine capability Mechanical arm 60（40、90 optional） Chain type - Max. Tool diameter mm φ125（adjacent：φ250） Max. Tool length mm 450 Max. Tool weight kg 25 Dimension mm 15300x7610x8000 Machine weight T 130 Attachment milling head Milling heads of right angle, universal, extended and special. Optional parts Attachment milling head