Air discharge direction Performance ranges Cooling capacity: from 5 to 649 kw Air volume: from 2828 to 263503 m3/h Sound pressure level: from 31 to 69 dB A(10m) Dry coolers:customized on demand High efficiency heat exchanger Capacity designs for maximizing the heat transfer relative to the energy consumption of the fan. Tube and tube coupling design for low pressure drop in the coil on the media sides(maximum 100KPa at water designing condition). Our thermodynamic and aerodynamic designing software is long year tested and proved in Germany Fan Only choose low specific energy consumption fans. Fan nozzle designs for maximum air flow and air throw. Our fans from the world`s leading manufacturer are practically proved to be reliable in operation and long lasting. Motor: protection class IP 54 and insulation class F. Voltage：400V/3N/50Hz Air separator for each fan. Testing Heat exchangers are supplied clean and tested at a pressure of 30 bars Options Coil design refrigerant: water, oil, glycol. Multiple circuits. Sub-cooling circuits. Stainless steel or aluminum casing. Coated aluminum or copper fins. Explosion ploof motor. Customized fin spacing.

Products Features Capacity: 12~35kw. Efficiency: 2.7~3.3 cop. Warranty: Compressor- 3 years limited. other parts-1 year limited. Structure Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance toatmospheric agents. Direct expansion coils with condensate drain tray. Hermetic compressor High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,mounted on rubber vibration dampers Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise Centrifugal fan Forward curve centrifugal fans for air treatment section and axial fans for condensation section. Front, side and underside air discharge of the treatment unit. High external pressure, long air supply distance Electric panel Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components. Easy operation line controller Cooling/Heating/Auto. Error indication. Timing on/off. Product options Economizer with fresh, return air dampers and fresh air hood. Free cooling function for low ambient temperature. Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C BMS devices. T3 (Tropical climate). Condenser coil guard. Roof curb. Metal / aluminum filter. Air pressure switch for indoor fan. High static condenser fan option with sealed + drain.condensing section. Optional water heating coil. Metal or plastic mesh on condenser coil. Optional supply / return air configurations. Upgraded evaporator fan motor drives. G4 filter, plate and bag filter.

Feature • Hexagon crimping type for cable lug，wire clamp, pipe with hexagon dies or other dies for crimper • C-shape head design for convenient operation. • Head could be rotated 180 degree. For flexible operation in confined place. • Tools are set by double speed. Quick speed while dies have not connected with lug.Slow speed while dies touched lug. Two speed for save your labor and time. • Fitted with safety valve. Automatically relief working pressure when complete crimping. • Standard set dies, include 35 50 70 95 120 150 185 240 300 mm² • Dies could be OEM • Plastic case package is for easy carrying and well tool protection Parameters Model CYO-300 Terminal Type Cable Lug or Connector Crimping Capacity 35 50 70 95 120 150 185 240 300mm² Output 12 T Ram Stroke 30 mm Length 525mm Weight 6.0kg Application Our hydraulic tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Illumination: 180000+180000 Up doctor head temperature： <1℃ Color temperature: 3500-5000k Ceiling minimum height： 2800mm Diameter spot: 150-400mm Control panel LCD display, Touch screen Light adjustable steps: 1-9 Back-up battery 12V optional Restore color index: 95-98 Power 220V±10%,50Hz Shadowless proportion: 98% Package wooden case LED using life: >50000h Packing size 102*74*70cm Work distance： 500-2000mm Gross weight 107KG

Feature • For fastening cable and wires quickly, • Material: Manganese Steel. • For nylon cable tie from 2.4mm to 4.8mm in Width. • Adjustable tension and automatic cut off. • With safe stop equipment to prevent injury. • Length:165mm • Weight: 0.3 kg Parameters Model HS-600F Cable Tie Type Nylon Cable Tie Cable Tie Width 2.4mm to 4.8mm Length 165 mm Weight 0.3 kg Application Our tools mainly used for cable ties cutting , Electric working, State Grid construction, underground cable construction, Building construction etc

Feature • Application width: 0.3-7.9mm • Application scope: Stainless steel cable ties • Material: Special Tool Steel • Automatically tensions and cut ties in one operation • Designed with ensure reduce efforts Parameters Model HS-600B Cable Tie Type Stainless steel cable ties Cable Tie Width 0.3mm- 7.9mm Length 178mm Weight 0.68 kg Application Our tools mainly used for cable ties cutting , Electric working, State Grid construction, underground cable construction, Building construction etc

840002  Professional Angle Grinder With Soft Grip  125MM Application. Plastic,Cutting Disc. Dia.: 125mm Dia of hole :22mm Spindle diameter 14mm Rated Voltage : 230V Rated Frequency 50Hz Input power 1200W No-load Speed 11000/min Accessories: 1pcs side handle & 1pcs spanner  & 1pc grinder disc & 1pcs grinding guard Cable 2M   VDE Certificate CE/GS/EMC/ROHS/FFU GOOD Package: Color Label / Color Box Sample Time: 3 days Delivery Time: Within 35 Days after Receiving the Deposit Payment Terms: T/T  ,L/C

Main application This unit is made up of CLQ Ultrasonic Vertical Washing Machine, RSM Sterilizing & Drying Machine and KGYX Filling & Sealing Machine. Divided into three working areas of washing, sterilizing & drying and filling & sealing. It can be either used in-line or in the form of three single machines. Can automatically finish the processes of water spaying, ultrasonic wave washing, compressed air blowing, recycling water flushing, compressed air blowing, fresh high-temperature sterilizing, cooling, bottle-collating, filling, cap-collating, stopppering, panel mounting and so on for vials. Can be equipped with Servo-motor , more stability and accuracy.

Reverse osmosis is the eighties developed a membrane separation technology, which mainly use the semipermeable membrane permeation principle, to give it a certain way by applying a pressure on the natural infiltration direction against the force of the water in the concentrated solution dilute the solution to penetrate this way is called reverse osmosis. By the components of the device is reverse osmosis reverse osmosis unit. One, two reverse osmosis + EDI preparation (purified water process characteristics) 1 Suitable for raw water salinity compared Height regions; 2 product water conductivity is better; 3 one-time investment of less; 4 lower operating costs; 5.Stability.

Item Description Unit SLL50 Process Range Max. swivel diameter of spindle over bed mm 560 Max. swivel diameter of spindle over saddle mm 280 Max.machining diameter mm 480 Max. machining length mm 290 Spindle Chuck diameter mm φ254 Spindle nose model - A2-8 Taper of spindle bore - 1:20 Max. speed rpm 3000 Motor power Kw 15/18.5 Travel X axis travel mm 260 Z axis travel mm 700 Feed rate X/Z axis rapid shift m/min 18/24 Max. Cutting feed rate m/min 10 Tool turret Qty. Of tools pcs 8(12 optional) OD tool size mm 25*25 Boring tool handle diameter mm φ32 Tool changing time (adjacent/far) sec 0.68/1.5 Tailstock Shaft diameter of tailstock mm 95 Center taper - MT5 Center travel mm 120 Tailstock travel mm 650 Motor X/Y/Z motors Kw 3 Cooling pump motor Kw 0.4 Precision Positioning precision mm X/Z：0.01/0.12 Repetitive positioning precision mm X/Z：0.005/0.006 Reverse difference mm X/Z：0.006/0.012

Description Unit Travel X travel mm 1100 Y travel mm 560 Z travel mm 575 Distance between spindle nose and worktable surface mm 200-775 Distance from spindle center to stand column surface mm 590 Worktable Table area mm 550×1200 Max. loads kg 800 T-slot width mm 4×18H8×125 Spindle Max. spindle speed rpm 6000 Angle of spindle taper - BT-50 Feed rate X/Y/Z rapid speed m/min 24/24/15 Max. cutting feedrate m/min 15 Automatic Tool Changing System Qty. Of tools pcs 24 Tool changing time sec 2．5 Max. tool length mm 400 Max. tool diameter/ Adjacent no tool mm 110/200 Max. tool weight kg 15 Motor Spindle motor kw 11/15 X/Y/Z axis motor kw 3/4/4 Cooling pump motor w 0.4+0.9 Precision（SN precision according to standard JB/T8772.4-1998） Positioning accuracy mm X:0.018,Y/Z：0.014 Repetitive positioning accuracy mm X:0.012,Y/Z：0.011 Machine Dimension Overall height of machine mm 3162 Floor area（L×W） mm 3340×3065 Weight kg 8500 Power supply kw 35

Parameters Unit GMC2040 Table size mm 4000*2000 Table load kg/m2 2000 T-slot size（width x nos.） mm 28*11 X travel mm 4500 Y travel mm 2800 Z travel mm 1250（1000 optional） Width passed the gantry mm 2600 Distance from spindle nose to table surface mm 200～1450（200～1200 optional） Spindle nose — ISO 50# Main motor power（cont./30min.） kW SIEMENS：22/30（optional 28/39） FANUC：22/26（optional 30/37） Max. Speed of spindle rpm 2000（3000、6000 optional） Cutting feed speed mm/min 5000 Rapid speed m/min 10 Type of tool magazine Mechanical arm Type of tool holders BT-50、JT-50 Magazine capability Mechanical arm 32（24、40 optional） Chain type - Max. Tool diameter mm φ125（adjacent：φ200） Max. Tool length mm 350 Max. Tool weight kg 20 Positioning accuracy mm Repetitive positioning accuracy mm Dimension mm 11030*5810*6860 Machine weight T 65 Attachment milling head Milling heads of right angle, universal, extended and special Optional parts Attachment milling head