Tag: High expanding yield multi-purpose use Remarkable weather resistance, Shelf Life: 12 months Description: GF-series Item-R 750ML PU foam is an one component polyurethane foam used to seal gaps and crevices. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for cure. Product  Features: Easy to use. Bonds to and seals most popular construction materials, wood, concrete, plaster, plumbing etc. Durable airtight seal-stops air infiltration, drafts and energy loss. High insulating value-saves energy and money. How To Use: 1. Shake can well to make the foam ready for use. 2. Clean the substrate and spray some water on it.. 3. Screw foam dispenser on tightly and turn the can upside down. 4. Vertical fill the gaps from the bottom upwards. 5. Foam is tack-free (surface drying) in 8 to 10 minutes in temperatures +18°C and +25°C; Higher temperatures will result in faster setup time. 6. Remove unwanted cured foam by cutting it with knife. Well done!

Tag: low expansion High bonding strength B2 self-extinguish  Shelf life 18 months Description: GORVIA® GF-series ITEM-G Spray PU Foam， With excellent adhesive initial tension for the construction and decoration applications, which has very good adhesion properties for wood, stone, gypsum board, glass, mosaic, brick, cement board, EPS / XPS panels etc. Product  Features: Easy to use. Low expansion High bonding strenghth B2 Fire rated Economically insulates, fills, seals and bonds How To Use: 1. Shake can well to make the foam ready for use. 2. Clean the substrate and spray some water on it.. 3. Screw foam dispenser on tightly and turn the can upside down. 4. Vertical fill the gaps from the bottom upwards. 5. Foam is tack-free (surface drying) in 8 to 10 minutes in temperatures +18°C and +25°C; Higher temperatures will result in faster setup time. 6. Remove unwanted cured foam by cutting it with knife. Well done!

Download how to choose the right filter housing Download catalogue for doctop filter mussels open type multiple bag filter housing- BM series - BM series mussels open type multiple bag filter housing is developed on the basis of fast open type bag filter housing, suitable for processing all kinds of acid and alkali liquid, solvent and all kinds of neutral liquid. BM series mussels open type multiple bag filter housing the bolt is used to tighten the cover body, and the pressure is higher. With flange and sealing ring and the unique three point pressing device to fastening bag, avoid side leakage, the top cover adopts a spring balance auxiliary opening mechanism, and can be at any angle. Filter characteristics: • Using high grade design specifications to ensure adequate corrosion and maximum reliability; • Suitable for large flow filter, can accommodate more impurities, also suitable for a long time to replace the filter bag of occasion; • Can choose 01, 02 dimensions of the filter bag or filter; • Eye bolt design, convenient operation, economical and practical; • Elaborate design of the auxiliary opening mechanism, so that the opening process is easy and effort, one hand to complete the operation; • Selection of high quality type 0 elastomer sealing ring, excellent sealing performance and sealing life; • Reduce the downtime to the shortest, promote productivity and reduce operating costs; • The liquid part is made of pure stainless steel, excellent corrosion resistance and durability; • eight models, respectively, three bags, four bags, five bags, six bags, eight bags, twelve bags, seventeen bags, twenty-three bags.

Download how to choose the right filter housing Download catalogue for doctop filter Material： pe filter felt are made of 100% filament polyesterne fiber,after needle punched, singed or polish for the raw polyesterne filter felt material, then pe filter felt can be sewn into pe filter bags. Feature: 1. Operation temperature 120Deg c, 2. the max surge is 150 deg c. 3. good anti-acid, good  anti-alkali ,good hydrolysis stability Available Finish: singed,calendar,heat set PTFE membrane,W/O,anti-static treatment. Advantage: polyester filter felt are widely used in the liquid filtration field. Apelication: • Paints and varnishes • Inks • Chemicals • Process water And so on.

Mixing tank The Tanks is widely used for the mixing, disposing and storing of all kinds of materials .it adopts all-closed construction and is made of high-quality stainless steel. it is equipped with fully auto-cleaning device auto-controlled device. it is the ideal equipment for storing juice, pure water and other liquid.  It is made of stainless steel 316 completely, meeting the requirement of GMP. structure and function: Structure: by the bladder, jacket, insulation layer  outer wrapping  reducer impeller thermometer etc. The tank: adopt stainless steel plate 304 materials, surface polishing. Install: Adjust the equipment supporting feet to horizontal and vertical gear reducer, to install the pipeline, at work, must pay attention to the impeller to rotate clockwise, shall not be reversed. Characters: The body of this series of stainless steel storage tanks formed by cylindrical stainless steel, and equipped with sanitary manhole, cleaning ball, liquid level gauge. 1. The equipment is single layer structure. 2. The material is stainless steel SS304 .

Air intake filter for air compressors Highly machenized production lines; More than 15 years professional experiences; All kinds of. Application: All kinds of air compressors.

1. HEPA Panel filter; 2. Frame: Galvanised or aluminum; 3. Class: H13; 4. Media: Fiberglass or PP. Description: High efficiency panel filters are mainly used to filtrate the suspended particles in the air with the diameter of 0.3um and below and  used for the termimal filtration of all kinds of filtration system. Applications: HEPA filters are extensively used in the terminal filtration of the civil or industrial cleansing places in the industries such as electron, semiconductor, precision mechanism, pharmacy, hosipital and food, etc., which require relatively high cleanliness factors. It is suitable to filtrate for clean room and clean factory workshop with dust particle diameter less than 0.3-0.5um.

Structure: Item Material(Standard) Material(Alternative) Filter Media Cellulose/Synthetic fiber/ All kinds of H&V air filtration`s filter Nanofiber/Polyester fiber media selection Top cap/ Galvanized steel Stainless steel Bottom cap (Open/Closed) Gasket EPDM Silicone Inner Mesh Galvanized steel Stainless Steel Outer Mesh Galvanized steel Glued or ultrasonic welded straps Finishing Treatment Teflon-coating,waterproofing,oilproofing,flame-retarding treatment, antistatic coating,etc 1. Suitable for Gas Turbine air inlet housing in all kinds of operating environments: We will equip the most suitable filter media from various selection of high quality to clean your air perfectly; 2. Prime Technique: Careful construction, low pressure drop and competitive price. 3. Installation: The Twist Lock filter cartridge is Installed horizontally. For the above product, following is its specifications: Item Dimensions(OD*ID*L)mm Specification Twist lock air filter cartridge 324*213*864 1.Filter Media:HV6279(cellulose/polyester) 2.Filter Area:27m^2 3.Gasket OD:12.38inch 4.End caps and mesh: Galvanised steel Application: Thenow cylindrical filter cartridge is suitable for gas turbine air intake system in all kinds of operating environments.

Detailed information(Product): Item Material(Standard) Material(Alternative) Filter Media Cellulose/Polyester/Synthetic All kinds of H&V air filtration`s fiber/Nanofiber filter media at option Top cap Galvanized Steel Stainless Steel Closed bottom Galvanized Steel cap Gasket EPDM Silicone,Urethane Inner Mesh Galvanized Steel Stainless steel Outer Mesh Galvanized Steel Stainless Steel Finishing Treatments Teflon-coating,waterproofing,oilproofing,flame-retarding treatment, antistatic coating,etc 1. Wide application range: There are ample filter media selections of high quality  available,making it suitable for various industries and dust types, including abrasive, toxic and explosive dust. 2. Business model available: OEM for some famous brands; Replacement filters; Aftermarket filters. Comprehensive advantages(Company): 1. The biggest manufacturer of filters in China; 2. H&V`s biggest customer in China; 3. Our vast experience and a state-of-the-art laboratory enable us to provide customization; 4. Welcome you to our factory and you will be convinced by our advanced workmanship and big scale. Applications: Except for gas turbine air inlet systems, the square flange cartridges are also ideal for air filtration of dust and fume from cement, metal/aluminum, food & beverage, wood work, chemicals, powder coating, plasma/laser cutting, sand blasting, textiles,welding and casting. Please contact us if you have any questions about square end cap filter cartridge.

Specification PL3-16 Hole Diameter 3mm, Center to Center 16mm Surface Melamine / Wood Veneer / Painting / Fire resistance panel Core 1,MDF core, low formaldehyde with E1 standard 2,ECO core, which is low formaldehyde with E0 standard. 3,MGO core, which is high fire resistance level with A standard. 4,any required core materials could be replaced. Back Soundtex acoustic felt attached on the back of the panels. Noise Reduction Coefficient 0.7 Fireproof grade GB8624 2012 A / B1 Eco-protection grade E0 / E1 Installation aluminum keel and clips, wood frame, gun nail Certification BV,CE,SGS,ISO9001-2008 Test report Eco protection, sound absorption, flame retardant Model Type Specification NRC Punching Rate P316 M-K-3/8-16-15 0.8 3.5% PL316 M-K-3/8-16-15 0.8 3.4% P616 M-K-6/8-16-15 0.85 14% PL616 M-K-6/8-16-15 0.85 13.8% P916 M-K-9/8-16-15 0.9 32% PL916 M-K-9/8-16-15 0.9 31.8