Mobile crane, is to use Mobile chassis walk arm of the rotating crane. Mobile crane is installed in the lifting institutions add heavy axle tyres and composed of special chassis a kind of full rotary cranes, its upper structure and crawler crane basic same, in order to ensure the installation work time the stability of the body, crane with four retractable a leg. In flat on the ground can need not a leg up on small weight lifting and crane content low speed driving. It consists of getting on and off two parts. Get on the bus for lifting operation part, arm, with lifting me. luffing mechanism, the balance weight and turntable, etc.; Get off for supporting and walk part. On and off the bus with rotary bearing connection between. Hanging heavy usually takes a leg when put down, increase the bearing surface, and will the leveling of the fuselage, to ensure the stability of the crane. Compared with the crane the advantages are: between wider, good stability, automobile body, short turning radius small,can in 360 ° work within. But its down the road to the demand is higher, speed is slow, not suitable for car type on the soft ground in the muddy. The development trend of Mobile crane is: large-scale, high efficiency, safety, ease self-respect, and to further improve the performance and driving mobility lifting. Feature:

Overview: This machine is specially made for all kinds of viscousity materials, such as chocolate paste，peanut butter, honey, butter, Mayonnaise, ketchup etc. All the contacted part with the chemical oil is high quality stainless steel.. The machine adopts piston pump for filling. By adjusting the position pump, it can fill all of the bottles in one filling machine, with quick speed and high precision. Item Piston pump filling machine Filling nozzle 12 Filling system Piston pump driven by servo motor Filling range 500-1000ml Filling speed 3600 b/hr based on 1L; Filling precision ±1% Power 220/380V 50/60Hz  3.5Kw Air pressure range 0.4 Mpa Weight 600Kg Machine side L1800*W1200*H1800

Summary This is multi-functional automatic cap ordering, cap feeding, cap pressing and reject device. The structure is Compact, operation is simple, and maintenance is convenient. Technical parameters Model: SD- YG65 Voltage: 380V. Power: 0.85 KW Air pressure: 0.45 a 0.7 MPa Weight: 400Kg

Sealing Sealing machine is composed by osculum, turning manipulator, cylinder, rail, etc. Equant Geneva movement is acted by precision CAM decollators via gear transmission. And then turn into the uniform scale, and put lid on can and sealing at uniform scale different place. Upper cover is acted by machine arm, and machine arm is worked by cylinder. And then the rolling knife turns 360° to seal. The lifting movement is acted by CAM and upper tooth shape leverage on motor shaft. One main motor provide the power for uniform scale and sealing action, this could ensure the coordination of action. The sealing head have skid institutions, it could ensure the tighten of cap, and also avoid to hurt the caps. Main technical parameters Can diameter：50mm-100mm Can height：60mm-190mm Power：1.5KW Capacity： 30-35cans/min Air pressure：0.5～0.7Mpa Dimension：1200*850*1500mm

Summary SD-KX 18 high speed box machine adopts automatic program, adapt to different carton size. The machine adopts the cam continuous system, the machine running reliable, stable, durable. Break through the traditional tape device design, sealing sealing tape Fu Ping, the effect is good, no jump belt. Any self adhesive tape can be used. Forming and sealing feed stepless speed control, the speed is adjustable, can save time. Simple operation, easy to adjust, no damage on carton. Carton storage mining horizontal, may at any time to replenish the empty box. Automatic alert to replace tape and replenish the empty box. Technical parameters: Out of the box capacity: 18 boxes/ min Carton storage quantity: 70PCS Carton size: L280-500*W200-400*H200-400MM The necessary air pressure: 5bar Air consumption: 450NL/MIN Mechanical dimensions: L2780*W1250*H1840MM

Summary: SD series is special for edible oil filling, capping and equipped with rotary transmission, PLC and frequency adjuster in speed. It is innovated and designed in the requirement of edible oil technics, on the bases of introducing, digesting and absorbing advanced technology abroad. It is reasonable in structure, safe to operate and easy to maintain, which is an ideal choice for edible oil producers. Model SD-20/6 Number of working positions filler 20, capper 6 Capacity 2,500BPH (5L) Applicable bottle diameter 50~200mm, height 150~360mm Material supply pressure 0.03~0.08 MPa Vacuum in filling tank 50~80mbar Air supply pressure 0.6~0.7MPa Air consumption 0.5 M3/min Installed power of motor 3.55Kw Rated voltage 380V, 50Hz Machine dimension 2100mm×2670mm×2950mm (L×W×H) Machine weight 2500kg

Overview: This machine is specially made for all kinds of viscousity materials, such as chocolate paste，peanut butter, honey, butter, Mayonnaise, ketchup etc. All the contacted part with the chemical oil is high quality stainless steel.. The machine adopts piston pump for filling. By adjusting the position pump, it can fill all of the bottles in one filling machine, with quick speed and high precision. Item Piston pump filling machine Filling nozzle 10 Filling system Piston pump driven by servo motor Filling range 500-1000ml Filling speed 36 b/hr based on 1L; Filling precision ±1% Power 220/380V 50/60Hz  3.5Kw Air pressure range 0.4 Mpa Weight 600Kg Machine side L1800*W1200*H1800 Automatic pressure machine instruction Summary This is multi-functional automatic cap ordering, cap feeding, cap pressing and reject device. The structure is Compact, operation is simple, and maintenance is convenient. Technical parameters Model: SD- YG65 Voltage: 380V. Power: 0.85 KW Air pressure: 0.45 a 0.7 MPa Weight: 400Kg Automatic round bottle labeling machine Introduction: Model SD-LTB-A Vertical Labeler for round bottle is mainly used in food, chemical and medicine industry. It can realize the automatic bottle-conveying, label separating, labeling round the bottle and a series of steps. Step-less speed adjustment, easy operation and adjustment with high speed and efficiency. The label will be attached to the exact position with high accuracy and low noise. The spare parts can be matched by customer’s specific requirement. Model SD-LTB-A Vertical labeler for round bottles Capacity 90～100 BPM Bottle Size（mm） To be confirmed Machine dimension（mm） 1600×960×1260 Weight（kg） 200 Power（w） 300 Voltage 220V / 50～60Hz (customized)

CO-60S Feature • Single action • Tools with Support frame and carry handles. • Applicable for copper, aluminum tube and wire clamps crimping. • Applicable for crimping steel standard wire in large cross section • Crimping cable lug dies: 400 500 630 800 1000mm² • Crimping steel standard wire: Die could be OEM • It is the lightest one in big ton crimper family. Dies upper parts are fixed which could be open by quick rotating. Then crimping formiddle tube or end tube. • To be worked with electric or gasoline pump • Dies could be OEM • Metal case package is for easy carrying and well tool protection Parameters Model CO-60S Terminal Type Cable Lug or Copper Tube Crimping Capacity 400 500 630 800 1000mm² Or OEM dies for steel standard wire Output 55 T Length 446 mm Weight 22 kg EHP-63A Feature • Single-Acting • Electrical controller for easy and safe operation • Operator can keep away from application during operation • Carrying handles for easy carrying with two handles • Quick coupler for easy pipe installation • Pressure gauge for safe operation • Monitor working pressure • Wood carton for well tool protection during delivery Parameters Model EHP-63A Rated Pressure 700 Bar Oil Reservoir 5000CC Oil Delivery Speed Low pressure 2.6cc/stroke High pressure: 0.32cc/stroke Working Pressure Low pressure 0-20bar High Pressure: 20-700bar Power 220V/50HZ Motor 0.75KW Size 350*270*490mm Weight 29 kg Application Ourhydraulic crimping tools mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

CO-300H Feature • Bolt locked style crimping head is applicable for crimping cable Lug, Connector, wire clamp, crimping pipe with hexagonal dies or other dies for crimpers. • To be worked with pedal pump, manual pump and electric driven hydraulic pump • 180 degree rotatable design: for easy operation in narrow place • Standard dies:16 25 35 50 70 95 120 150 180 240 300 mm² • Dies could be OEM • Plastic case package is for easy carrying and well tool protection Parameters Model CO-300H Terminal Type Cable Lug or Connector Crimping Capacity 16 25 35 50 70 95 120 150 180 240 300 mm² Output 12 T Ram Stroke 20 mm Length 235 mm Weight 3.1 kg CFP-800 Feature • Single-Acting foot pump • With pressure release lever • Wide bottom frame • High pressure Oil pipe supplied • Foot operated style which It is not necessary to bend or crouch down during operation, especially good for tall people . Quick couple kept fast connection with compatible tools. • Double Speed Unit: For quick operation. Allow quick oil delivery under no load condition (12.26cc/stroke), and then bulid  sufficient working pressure under lost condition (20-700Bar) • Safety Valve:  automatically relief pressure when rated pressure is reached, protect hydraulic system from over pressure • Packed with Steel Case Package for easy carrying and protect pumps well during shipping Parameters Model CFP-800 Rated Pressure 700 Bar Oil Reservoir 1200CC Oil Delivery Speed Low Pressure 12.26cc/stroke High Pressure 2.26cc/stroke Working Pressure Low pressure 0-20bar High Pressure: 20-700bar Size 610*140*170mm Weight 10.1 kg Application Our hydraulic crimping tools  mainly used for electrical working, State Grid construction, underground cable construction, Building construction etc.

Bottle unscrambler Summarize This automatic ordering machine is mainly suitable for round or square bottle, jar etc. is corollary equipment of automatic product ling in common usage, to satisfying many kinds of bottle, if  adjust, you need only adjust the position and height of baffle. The machine is equipped with step less governing frequency conversion. Mainly parts: (1) machine shelf. (2) Electric motor. (3) Reduce speed machine (4) conveyer belt. (5) Entering bottle tray. (6) Lead Export pack. (7) Stainless steel ordering bottle board. (8) Turning institution. Etc. 8 heads filling machine Overview: This machine is specially made for all kinds of viscosity materials, such as chocolate paste，peanut butter, honey, butter, Mayonnaise, ketchup etc. All the contacted part with the chemical oil is high quality stainless steel. The machine adopts piston pump for filling. By adjusting the position pump, it can fill all of the bottles in one filling machine, with quick speed and high precision. Item Piston pump filling machine Filling nozzle 8 Filling system Piston pump Filling range 250,500g Filling speed 3,500-4,000 bottles /hour Filling precision ±1% Power 380V 50/60Hz 3.2Kw Air pressure range 0.6-0.8Mpa Weight 800Kg Machine side L18000*W1200*H1800 (L*W*Hmm) Capping machine MAIN PART: (1)vibration disk (2)vibrator (3)slide rail (4)pedestal Just put bottle cap into the fall cap machine ,fall cap machine send the cap into slide rail orderly .When bottles go through take the cap away automatically.Fall cap machine use electromagnetic vibration machine ,so it has the advantages of high speed and low voice. MAIN TECHNICAL PARAMETER; Cap applicable：φ12-φ100mm（can be made according to customers`requirement） roduction ability：4000 bottles/hour Qualified rate：≥99% Voltage：220V 50/60Hz Power ：≤2.2Kw Speed control： frequency conversion adjusting speed Single machine noise：≤70dB Weight：Apr.1000Kg Overall dimension：1650×1000×1500（mm） Round bottle Labeling machine Introduction: Vertical Labeler for round bottle is mainly used in food, chemical and medicine industry. It can realize the automatic bottle-conveying, label separating, labeling round the bottle, automatically print lot number etc.  It adopts mechanical electrical monobloc technology, and stepper motor or servo motor and imported PLC controlling system, so as so be sure the accurate, stable, reliable labeling.

Bottle feeding machine: This automatic ordering machine adopts one motor to drive working table-board rotate, so as to deed bottle into conveyor. It is mainly suitable for cans, round or square bottle, is corollary equipment of automatic product ling in common usage, to satisfying many kinds of bottle, if  adjust, you need only adjust the position and height of baffle. The machine is equipped with stepless governing frequency conversion. Auger powder feeding machine The machine is specially used for feeding material into powder filling machine; it is widely used in food, chemical industry, plastic packing and other industries. The height is subject to space of workshop. It can move freely, high speed, and reliable.  It can equipped with different screw according to different material.The parts touching material is made of stainless steel. 1 head powder filling machine The machine can finishing measuring, filling etc. because of original design, it is more suitable for packing powdered material that is easy to flow, like veterinary drug, sugar, glucose, carbon dust, talcum powder, essence etc. Except motor, the shell of the whole machine is 304 stainless steel, and the powder contact part are SS 316.combined transparent workbin, easy to dismantle without tools. Adopts servo motor to drive auger, with the advantages of durable, accurate location, stable function etc. the machine is controlled by PLC, with stable working, anti-distraction, high filling precision etc. Automatic Round Can Vacuuming and Nitrogen Filling can sealer Product Description This machine is applicable for Round Shaped Tinplate can , Aluminum Can or PET can seaming with vacuuming and nitrogen filling processes. Technical Parameters 1)  Seaming Speed: 10 cans / minutes 2)  Size range of can: Diameter: 70-127mm, Height: 80-190mm 3)  Power requirement: 380V, 50/60HZ, 4)  Power Capacity: 4.0 Kw 5)  Net Weight: 500kg 6)  Dimension: 2000(L)×800(W)×1850(H)mm 7)  Compressing Air Requirement: 0.6-0.8MPa 8)  Compressing Air Consumption: 80Liter/Min 9)  Nitrogen Pressure: >=0.4Mpa 10) Nitrogen Consumption: App. 50 Liter/Min 11)  Residual oxygen content: <=5% 12) Vacuuming Pump: Include

Thickness 0.17-1.5 mm Width 500~1200 mm Length 1~10 meters color RAL cart or customized base  Material 1 electric galvanized steel 2 Hot dip galvanized steel 3 galvalume steel base  Material  coating Please contact us Paint PE/HDP/SMP/PVDF Corrugated type 40 corrugated types, please contact us slm3(at)shleadingmetal.com get the whole catalog. Customized Provide customized service as your requirement Thickness Tolerance(mm) +/-0.01 to +/-0.05