Interested in cold pilger mill,LG80 Two-Roller Cold Pilger Mill ? Choose Hengli Machinery cold pilger mill,LG80 Two-Roller Cold Pilger Mill Manufact

Zhangjiagang Hengli Machinery Co.,Ltd

Home > Products > Two-Roller Cold Pilger Mill > LG80 Two-Roller Cold Pilger Mill

LG80 Two-Roller Cold Pilger Mill

Introduction

The features of LG80 two-roller cold pilger mill :

1.The main conveying system is with V belt which can make sure equal force , creditable and stable function .

2.There are airbag type clutch and hydraulic brake between belt pulley and driving shaft which can brake quickly and stop exactly during the urgency .

3.The adoption of ring groove roller is to realize long term rolling . Big rotation angle of roller , longer ring type working stage and increased length of deformation zone lead to the uniformity of metal deformation during the rolling . At the same time , it can increase feeding volume and improve the quality of the final processed pipe .

4.The rolling mill adopts edge feeding way removing the mandrel comparing to the side feeding . The exact location of mandrel on the deformation zone and short rolling line not only suit for rolling long tube billet but also improve the roller’s efficiency .

5.Electric-control feeding and discharging way improve the working efficiency .

6.It is easier to replace the roller and more convenient to maintain based on the open rack .

7.Twin-wire feeding way realize the stable feeding.

8.To tighten with hydraulic mandrel lowers the labor strength .

9.The mechanical CAM type rotary feeding way is stable and reliable.

Parameter

№	Name	Number	Unit
1	Shell OD	50-121	mm
2	Shell WT	2-10	mm
3	Shell Length	6	m
4	Finished Tube OD	40-100	mm
5	Finished tube WT	1-8	mm
6	Max. Length of the Finished Tube	15	m
7	Rolling speed	50-70	Times/min
8	Stroke length	903.3	mm
9	Feeding length	2.4-10.3	mm
10	Turning angle(degree)	42°
11	Form of feeding and turning	Cam
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	400	mm
14	Length of connecting rod	2800	mm
15	Stroke length distance from tube center to gear center	280	mm
16	Roll module of gear	14
17	Power of main motor	160	Kw
18	Feeding way	From back after stopping
19	Dimension(Lx Wx H)	42x5x2.6	m

Products