Hengli Machinery’s superior pilger mill,two-roller cold pilger mill,LG45 Series Two-Roller Cold Pilger Mill

Zhangjiagang Hengli Machinery Co.,Ltd

Home > Products > Two-Roller Cold Pilger Mill > LG45 Series Two-Roller Cold Pilger Mill

LG45 Series Two-Roller Cold Pilger Mill

44

Introduction

The features of LG45 Series two-roller cold pilger mill :

1. The main conveying system is with V belt which can make sure equal force , creditable and stable function .

2. The adoption of ring groove roller is to realize long term rolling . Big rotation angle of roller , longer ring type working stage and increased length of deformation zone lead to the uniformity of metal deformation during the rolling . At the same time , it can increase feeding volume and improve the quality of the final processed pipe .

3. The rolling mill adopts edge feeding way removing the mandrel comparing to the side feeding . The exact location of mandrel on the deformation zone and short rolling line not only suit for rolling long tube billet but also improve the roller’s efficiency .

4. Electric-control feeding and discharging way improve the working efficiency .

5. It is easier to replace the roller and more convenient to maintain based on the open rack .

6. Twin-wire feeding way realize the stable feeding.

7. To tighten with hydraulic mandrel lowers the labor strength .

8. The Mairtai type rotary feeding wau is precise , stable and reliable .

LG45

№	Name	Number	Unit
1	Shell OD	30-75	mm
2	Shell WT	1.5-6	mm
3	Shell Length	6	m
4	Finished Tube OD	20-50	mm
5	Finished tube WT	0.6-5	mm
6	Max. Length of the Finished Tube	15	m
7	Rolling speed	60-90	Times/min
8	Stroke length	703	mm
9	Feeding length	2-8.3	mm
10	Turning angle(degree)	66.7°
11	Form of feeding and turning	Mairtai
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	300	mm
14	Length of connecting rod	2000	mm
15	Stroke length distance from tube center to gear center	220	mm
16	Roll module of gear	8
17	Power of main motor	75	Kw
18	Feeding way	From back after stopping
19	Dimension(Lx Wx H)	32x3.5x1.5	m

LG45G

№	Name	Number	Unit
1	Shell OD	30-75	mm
2	Shell WT	1.5-6	mm
3	Shell Length	6	m
4	Finished Tube OD	20-50	mm
5	Finished tube WT	0.6-5	mm
6	Max. Length of the Finished Tube	15	m
7	Rolling speed	60-90	Times/min
8	Stroke length	703	mm
9	Feeding length	1-10	mm
10	Turning angle(degree)	36-72°
11	Form of feeding and turning	DC with electrical drive
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	300	mm
14	Length of connecting rod	2000	mm
15	Stroke length distance from tube center to gear center	220	mm
16	Roll module of gear	8
17	Power of main motor	75	Kw
18	Feeding way	From back after stopping
19	Dimension(Lx Wx H)	32x3.5x1.5	m

Products