Experienced supplier of cold pilger mill,LD40 Series Three-Roller Cold Pilger Mill

Home > Products > Three-Roller Cold Pilger Mill > LD40 Series Three-Roller Cold Pilger Mill

LD40 Series Three-Roller Cold Pilger Mill

Introduction

1. The main conveying system is with V belt which can make sure equal force , creditable and stable function .
2. The precision of steel pipe is high enough to be manufactured thin-wall pipe with three-roller .
3. The rolling mill adopts edge feeding way removing the mandrel comparing to the side feeding . The exact location of mandrel on the deformation zone and short rolling line not only suit for rolling long tube billet but also improve the roller’s efficiency .
4. It is convenient to change and maintain the roller.
5. Monofilament thread rod feeding way is stable and which is assisted by the top tray rotation .
6. The Mairtai type rotary feeding way is precise , stable and reliable .

LD40

№	Name	Number	Unit
1	Shell OD	17-42	mm
2	Shell WT	≤ 2.5	mm
3	Max Shell Length	5	m
4	Finished Tube OD	35-40	mm
5	Finished Tube WT	≤ 2	mm
6	Max length Finished Tube	12	m
7	Rolling speed	65-110	Times/min
8	Stroke length	475	mm
9	Feeding length	2-10	mm
10	Turning angle(degree)	54°
11	Form of feeding and turning	Cam
12	Diameter of roll	90	mm
13	Length of connecting rod	1500	mm
14	Power Supply	380	mm
15	Power of main motor	37	Kw
16	Dimension(Lx Wx H)	22x3x1.3	m

LD40 Hydraumatic Type

№	Name	Number	Unit
1	Shell OD	17-48	mm
2	Shell WT	0.5-2.5	mm
3	Max Shell Length	5	m
4	Finished Tube OD	15-45	mm
5	Finished Tube WT	0.3-2	mm
6	Max length Finished Tube	12	m
7	Rolling speed	60-110	Times/min
8	Stroke length	475	mm
9	Feeding length	3-8	mm
10	Turning angle(degree)	54°
11	Form of feeding and turning	hydraumatic
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	90	mm
14	Length of connecting rod	1500	mm
15	Stroke length distance from tube center to gear center	234	mm
16	Power of main motor	37	Kw
17	Feeding way	Feeding after stopping
18	Dimension(Lx Wx H)	25x3x1.3	m

LD40 Machinery Type

№	Name	Number	Unit
1	Shell OD	17-48	mm
2	Shell WT	0.5-2.5	mm
3	Max Shell Length	5	m
4	Finished Tube OD	15-45	mm
5	Finished Tube WT	0.3-2	mm
6	Max length Finished Tube	12	m
7	Rolling speed	60-110	Times/min
8	Stroke length	475	mm
9	Feeding length	2-10	mm
10	Turning angle(degree)	54°
11	Form of feeding and turning	Martensite
12	Way of feeding and turning	Single rotating and single feeding
13	Diameter of roll	90	mm
14	Length of connecting rod	1500	mm
15	Stroke length distance from tube center to gear center	234	mm
16	Power of main motor	37	Kw
17	Feeding way	Feeding after stopping
18	Dimension(Lx Wx H)	25x3x1.3	m

Products