JWT 6011 Temperature Regulating
JWT6011 Enclosure Internal Thermostat
Advantage
1. High quality
2. Good function
3. High switching capacity
4. Passed the CE test
5. Great design
* Bi-metal controller as a temperature sensitive element with thermal feedback.
* Contact Point scheme: single-pole switchover contact as instant switch component;
* Permissible contact load:
Cat. 5-3 (heating) AC10 (4*)A, DC=30W Cat. 5-4 (cooling) AC 5(4*)A, DC=30W
(*)=Inductive load at cost phi=0.6
Set range: 0℃ to + 60℃
* Weight: 105g appr Size: 71×71×33.5mm Switch difference:1K±0.8K;
* Voltage scope is wide, any type could be used from 24V two 230V
* Time-saving connection,terminal block counld be installed screw from outside
* Easy installation, could be installed to 35mm din rail vertically or horizontally, according to EN50 022,it could be clipped to NS/35-ES cabinet profile with its accessory adapter;
Application especially suitable for controlling fan-and-filter units, heaters and heat exchangers, this thermostat can also be used as a signal generator for Monitoring the enclosure internal temperature.
Advantage
1. High quality
2. Good function
3. High switching capacity
4. Passed the CE test
5. Great design
* Bi-metal controller as a temperature sensitive element with thermal feedback.
* Contact Point scheme: single-pole switchover contact as instant switch component;
* Permissible contact load:
Cat. 5-3 (heating) AC10 (4*)A, DC=30W Cat. 5-4 (cooling) AC 5(4*)A, DC=30W
(*)=Inductive load at cost phi=0.6
Set range: 0℃ to + 60℃
* Weight: 105g appr Size: 71×71×33.5mm Switch difference:1K±0.8K;
* Voltage scope is wide, any type could be used from 24V two 230V
* Time-saving connection,terminal block counld be installed screw from outside
* Easy installation, could be installed to 35mm din rail vertically or horizontally, according to EN50 022,it could be clipped to NS/35-ES cabinet profile with its accessory adapter;
Application especially suitable for controlling fan-and-filter units, heaters and heat exchangers, this thermostat can also be used as a signal generator for Monitoring the enclosure internal temperature.
| Sensing Element | Bimetallic |
| Shock configuration | Conversion of electric shock as a transcient unipolar swtiching elements |
| Permissible contact load |
Cat. 5-3 (heating) AC10 (4*)A, DC=30W Cat. 5-4 (cooling) AC 5(4*)A, DC=30W (*)=Inductive load at cost phi=0.6 |
| Temperature adustment range | 0ºC to 60 ºC |
| Rated Voltage | 230/115/60/48/24V (AC)60/48/24V(DC) |
| Weigt | 105g |
| Size | 71×71×33.5mm |
| Switching difference | 1k±0.8k |
Products
TOP
Mobile phone quick desktop
Supplier portal Website:www.x-cloud.com/supplier
© 1999-2015 x-cloud.com. All rights reserved. 沪ICP备12049434号-2