JWT6011 Enclosure Internal Thermostat Advantage 1. High quality 2. Good function 3. High switching capacity 4. Passed the CE test 5. Great design * Bi-metal controller as a temperature sensitive element with thermal feedback. * Contact Point scheme: single-pole switchover contact as instant switch component; * Permissible contact load: Cat. 5-3 (heating) AC10 (4*)A, DC=30W Cat. 5-4 (cooling) AC 5(4*)A, DC=30W (*)=Inductive load at cost phi=0.6 Set range: 0℃ to + 60℃ * Weight: 105g appr Size: 71×71×33.5mm Switch difference:1K±0.8K; * Voltage scope is wide, any type could be used from 24V two 230V * Time-saving connection,terminal block counld be installed screw from outside * Easy installation, could be installed to 35mm din rail vertically or horizontally, according to EN50 022,it could be clipped to NS/35-ES cabinet profile with its accessory adapter; Application especially suitable for controlling fan-and-filter units, heaters and heat exchangers, this thermostat can also be used as a signal generator for Monitoring the enclosure internal temperature. Sensing Element Bimetallic Shock configuration Conversion of electric shock as a transcient unipolar swtiching elements Permissible contact load Cat. 5-3 (heating) AC10 (4*)A, DC=30W Cat. 5-4 (cooling) AC 5(4*)A, DC=30W (*)=Inductive load at cost phi=0.6 Temperature adustment range 0ºC to 60 ºC Rated Voltage 230/115/60/48/24V (AC)60/48/24V(DC) Weigt 105g Size 71×71×33.5mm Switching difference 1k±0.8k