Main Features
1. Shoot glue volume increased sharply, and compared to normal injection molding machine to increase by about 20%, more suitable for PET tube production.
2. Adopt 24:1 PET screw design, greatly improving the PET tube forming process easy occurrence of bubbles, wire drawing, the products of white, product defects such as yellow, ensure the excellent plasticizing effect.
3. Equipped with ceramic heating coil, heating up fast, good insulation performance, avoid products production process in plasticizing, due to the temperature control is not accurate.
4. Thimble force compared to normal injection molding machine increase 30%, and is more suitable for deep cavity PET tube forming.

5. Equipped with dropping oblique head.

6. PET - Se servo dedicated than traditional injection molding machine, high production efficiency and save energy more than 40%.

7. The servo control system, rubber pressure and flow rate in real time closed-loop control, the servo system has high stability and repeatability, improve the quality of PET tube forming and the percent of pass.
8. European import B&R professional injection molding machine control system, 10.4 TFT color LCD display, glue, pressure maintaining, sol full closed loop control, forming precision high.
9. Green environmental protection flow all core glass fiber efficient filter with a large quantity of pollutant carrying permanent magnet filter, with glass fiber filter 99.9% efficient universal flow filter 10 microns of the pollutants, which can effectively reduce the risk due to the hydraulic oil pollution caused by oil problem.

Type	/	Vacuum blood tube		Cap
Item	/	260SeII		260SeII
Screw diameter	mm	50	55	50	55
Theoretical shot volume	cm3	499	603	499	603
Shot weight	g	449	543	449	543
Shot weight	oz	15.9	19.2	15.9	19.2
Length/Diameter ratio	L/D	22.2	20	22.2	20.0
Injection pressure	MPa	218	180	218	180
Injection rate	cm3/sec	365	441	198	239
Injection stroke	mm	254		254
Max. screw speed	rpm	300		184
Plasticizing capacity	kg/hr	161.5	227	99.1	139.4
Injection unit force	ton	8.9		8.9
Injection unit distance	mm	400		400
Clamping force	ton	260		260
Max.template distance	mm	1130		1130
Clamping stroke	mm	550		550
Distance btwn. Tie bars	mm	580X580		580X580
Min mould dimension	mm	400X400		400X400
Mould thickness range	mm	200~580		200~580
Ejector force	ton	8.5		6.5
Ejector stroke	mm	160		160
No. of ejector pins	unit	9		9
Max.motor current	kW	56		28.3
System pressure	MPa	17		17
Hydraulic pump capacity	L/min	280		152
No. of heater zones	unit	5+1		5+1
Heater input power	kW	15.42		15.42
Net weight	ton	8.2		8.2
Oil filling capacity	L	430		430