●Applicable for concocting finished products or mixing different phases of materials in coating, dyes, pigments, printing inks, pesticide and paper-making industries, etc. It can be fitted with many kinds of mixers, which are suitable for different working conditions. ●As per different requirements, the kettle is able to be made into many types such as vacuum type, normal-pressure type, pressure-proof type, cooling type, heating type and so on. ●Various blades as paddle, frame and anchor with low-speed running can be chosen. Also the kettle, normally with single layer structure can be made into normal –pressure type, pressure- proof type, etc.

●High efficiency mixing equipment applicable for high viscosity, to make material dispersing,dissolve and mixing uniform. Especially for coating, ink, pigment and so on industry.

BPF-H conversion dispersing machine is the latest model which is designed according to actual need in production, mainly used in preproduction experiment of liquid sizing agent such as paint, coating, dye, plastic, foodstuff, etc. It can provide right data for mass production, also used in small-lot production. It can disperse 5 to 80 litres. Characteristics ●Frequency speed control, digital display. ●Container is fastened with belt to ensure safety. ●Hand-operated lifting, handle conveniently.

Characteristics • New driving permanent magnet DC motor, no carbon brush consumption. • Small size, large torque, high efficiency.low energyconsumption, low noise, no reversing spark interference and linear speed-governing. • Stepless speed regulation,PLD control technology, four LED digital tube display the speed of motor directly, dispersing and grinding together.

Apply for disperse and mill of small batch products.with characters ofmulti-function,easy operation and stable.It is widely use in science study and new product's development. Characteristics ●Multi-function,combine function of disperse,mill and mix in one machine. ●The disperser head it easy to dissemble and clean. ●Widely batch tackle scope. ●Digital disply and brainpower control.

The dual shaft disperser is suitable to stir and disperse two or many kinds of liquid and powder materials. Double impellers disperse the solid-liquid phase in the same time, effectively reduce the material following up and accelerate the dispersing result and quality.

The series of FDG high speed mixers are suitable for pro-ducing paint, ink, coating, dyestuff, paper making and so on in chemical industry. The mixers are used for wet dispersing and mixing liquid-solid material.Non-grade speed adjustment by frequency converters, hydraulic elevating, working steadily, use and maintenance expediently.

Application area The lab sand mill is widely used in laboratory in different industry, such as painting, ink, pesticides, operating simply, using conveniently.

Application area Mainly used in color paste and pesticide formulation. It's suit for medical laboratories, biological research, cosmetic and colleges laboratories. Applied in the field of dispersing and dissolving of liquid and liquid or solid and liquid with various viscosity levels. Characteristics • The structure of machine is designed according the principle of the sand mill, the experimental results can be enlarged and can could direct the production. • With frequency inverter,the machine could adjust speed according to the process characteristics of the material, could collect optimum parameters. • Such as temperature and pressure The parameters controlled by PLC ,can make ensure the safety of production and the equipment run fully to meet the technological requirements. • With imported diaphragm pump. • Fineness 100nm. • The whole structure is reasonable, running safety.

Characteristics ●This machine has stable structure ,ingenious design design and convenient operation. ●Cleaning、changing colour and replacing mill bead can be much easier. ●Non –vestigital design, it can solve the problem of material discharging better after milling. ●Hard alloy sticks, with proper redistribution, high-efficiency milling result can be obtained. ●Double cooling of inner rotor and outer jacket ensures effect of material cooling. ●Better lining of wear-resistant alloy, without pollution to materials. ●With less abrasion of milling media and cost.

Application area Suilable for printing ink, solvent ink, water-based ink, automobile paint, industrial coating, pigments, color paste, and nanometer materials. Characteristics • New design of pin-type grinding components, high grinding efficiency high output, and low energy consumption. • With smaller length/diameter ratio and higher energy density. • Using high flux static centrifugal separation sieve, large discharging area, grinding medium no contact with the sieve, no abrasion, with longer service life. • Grinding Barrel and grinding rotor adopt forced cooling system, with lower discharging temperature and no influence on sensitive materials. • Using top high quality wear-resisting alloy steel, reduce pollution to products. different materials are optional as per different products, such as stainless steel, high polymer materials, ceramics, etc.

Characteristics • High flux―technology imported from Germany: static centrifugal discharging devices, large discharge area with high output. • Double mechanical seal, lubricating liquid dissolves with material, safe and reliable. • Grinding area is made of special anti-wearing alloy ensuring long service life. • Cooling efficiency: segmented double helix waterway which is more advantageous to the energy exchange. Cooling efficiency is 2 times better than ordinary types. • Intelligent double mechanical seals: German mechanical seal technology, imported- fluorine sealing rings can resist different solvents. • Grinding efficiency: increased to more than 30% compared with regular models, the combination of the disperser can rapidly improve dispersion efficiency. The grinding medium can be superfine size to be more efficient.