Product Name AAAC、AAC&ACSR Reference Standard This product is produced with the standard of IEC 61089-1991 Applications Aerial transmission and distribution line, State Grid Project Performance Featured with convenient erection & maintenance, low cost of line construction, high transmission capacity, facilitate laying in special geographical condition such as across rivers and valleys, good conductivity and enough mechanical strength & tensile strength, pole distance could be increased and so on.

RVVSP Multi Core PVC/PVC High Flexible Shielded Twisted Pair Loose Copper Conducted Cable. Features RVVSP cable comparison of the RVV cable, the use of steel wire braided shield, it has better electromagnetic compatibility characteristics. It is particularly suitable for harsh electromagnetic environment, the installation distance smaller installations. Application RVVP product can be installed in cable trays, hose, for indoor installation. AC rated voltage 300 / 500V and below electrical, instrumentation, intercom, monitoring, control, installation, broadcast audio, alarms and electronic equipment and automation devices shielded lines. • Rated Voltage: 300V / 300V Conductor: stranded copper conductor, in line with GB / T 3956 Class 5 (equivalent to IEC60228.5) • Insulation: Polyvinyl chloride (PVC) mixture. • Shield: Tinned copper braid shield, weave density of greater than 85% • Sheath: Flexible PVC compounds (PVC), gray (RAL7001). • Core Identification: ≤5 core, core color; black cores with white numbers, may contain yellow-green ground. • Number of Cores: 2-24 core • Cross-sectional Area: 0.5-25mm2 • Test Voltage: 2000V, 5min. • Insulation Resistance: > 20M ohm × KM. • Temperature (fixed installation): - 30 ~ + 70 ℃. • Temperature (mobile installation): - 5 ~ + 70 ℃. • Bending Radius: 15 × cable diameter. • Retardant Properties: IEC 60 332.1. • Reference Standard: JB8734, VDE 0281. • Packing: 100m, 500m, 1000m.

Design Concept $ Process Description In order to ensure that the products in the use of the performance of good and lasting. We use strands of fine twisted and fine twisted bundles of fine level of oxygen free copper as a conductor, conform to DIN VDE 0295 grade 6, made of insulating PVC T12 conform to DIN VDE 0581 Part 1, PVC sheath TM2 conform to DIN VDE 0581 Part 1, and special structural design, mechanical and electrical properties can be calculated and simulated test using occasions. Reasonable structural design, strict material selection, excellent production and processing, strict quality control procedures to ensure that products in the practical application of good results. High soft of shielded twisted pair cable use: wood processing and packaging machinery, assembly line, automation equipment, CNC machine tools, machinery and equipment. Application This product is highly flexible characteristics, widely used for control cable and in bending requirements of the control unit, designed for use in continuous bending free movement without tension and forced movement of the towline system, while maintaining a flexible cable for mobile applications. Features Can be customized according to customer requirements color line core or coding line core. Good mechanical performance, high degree of flexibility. When used in the chain for the design life of 500 times of cyclic bending, validated and in practical use.

Application This cable is suitable for use in mobile, multi oil and other harsh environment. Widely used for connection control cable and signal transmission, in bending requirements of the control unit, designed for use in continuous bending, freedom of movement and forced movement of the towline system, while maintaining a flexible cable for mobile applications. Features It has a strong oil resistance, anti UV cable, waterproof, wear-resistant, bending resistance, break resistance, weak acid and alkali resistance. This cable can be guaranteed in the absence of external force to move the state to use the 6 million core bending. Motor is divided into two parts servo motor and encoder, servo motor cable is mainly used to power servo motor, in order to maintain the entire servo system is working properly, which is widely used in industrial automated production lines, storage equipment, robotics, crane equipment, packaging machinery, machine tools, metallurgical industry and other industries. For the transmission of alternating current, servo motor cables are prone to interference with neighboring encoder cables and other signal cables, so the servo motor cable’s shielding requirements is particularly important. Servo cable provided by us offer a high density, excellent electromagnetic shielding,so the product can meet a variety of standard servo systems, such as: Siemens, Lenze, INDRAMAT and SEW other outstanding product performance, besides, we also can provide for a variety of drag chian servo cable. High flexible Shielded servo cable is suitable for AC rated voltage 300 / 500V and below, with highly curved continuous motion design are made and used as control cable, widely used control unit such as electronic industry system, data transmission system, robots and logistics system. This product can be connected to a variety of frequent mobile electrical equipment, can be built high strength steel wire, to enhance the strength of its can withstand the tension, the extension of the cable use time. Widely used in driving, car, transmission machinery, heavy crane and a variety of testing equipment, but also can be used for self-bearing type well or inclined shelf type installation, power transmission cable and control, lighting, communications, cable road use.

Application The spiral cable is suitable for all kinds of machinery, lifting platforms, conveyor, conveyor belt, agricultural equipment, construction machinery and trucks against chemical corrosion, temperature levels, have high mechanical strength is required. Spiral spring cables (spring line) is a use of wiring of scalability to work. Usually with TPU cable around the system. Device for controlling the movement of the movable electrical connection can rebound quickly in a short time, widely used in automobiles, machinery, instruments and other mobile devices. The direction of the points, there are left and right direction of the coil spring coil spring. Material: Mainly PVC cable coil springs (spring line), PUR cable coil springs (spring line) and cable rubber coil spring (spring line); PUR cable coil springs (spring line) flame retardant, oil, acid resistance, low temperature, UV, abrasion resistance, resistance to hydrolysis and other special effects as (spiral spring cable spring line) the material of choice to be used more widely. Spiral cable has good flexibility and elasticity (extension length of up to 3-4 times the original length of the spring). Good cold resistance, flame resistance, oil resistance and abrasion resistance. We custom different requirements of production of various kinds of occasions spiral spring cables. RJ45 Spiral Electrical Spring Cable of Industrial Application and Copper Conductor Material Retractable spring cables, we also provide high flexible Electric vehicle power charging use spring cables.

0.6~1KV PVC Sheath Control Cable 0.6~1Kv KVV/KVVP PVC Sheath and PVC Insulation Loose Cooper Conducted Control cables, PVC Sheathed Flexible Control Cable, Braiding Screened Cable. In industrial applications, because of the harsh installation environment, it requires the cable should have higher quality and performance: one hand, the laying space is relatively limited, the cable should be flexible and have a small bending radius; another hand, because of the various of potential risks in factory, it requires the cable should defend the mechanical damage and physical and chemical erosion. We can provide a full range of flexible power and control cable, which mainly used for processing machinery, production line, the conveyor belt, air conditioning system, the connection between the controller, to control and power equipment transmission system. Products include static and dynamic application multi-core or multi-pair flexible cable. Product Standard This product is manufactured according to GB/T9330, IEC60227 and IEC60502 etc. Place of Origin: Shanghai, China Brand Name: HZQC Model Number: KVV,KVVP2.KVV32 Insulation Material: PVC Type: 0.6~1kv KVV/KVVP Control Cable Application: Signal control, transmission, telecommunication Conductor Material: Copper Jacket: PVC/PUR/TPU Certificate: CE/ ISO/CCC Standard: IEC60092,IEC60332 Core Type: Single wire Color: Black or customized Operation Temperature -20~+70℃ Size: 1.5~80mm2 Rated Voltage: 0.6-1kv Application PVC insulated and PVC sheathed control cables are suitable for the wiring of electrical controlling equipment and instrument, monitoring and controlling return circuit, electrical protection and measurement in power distribution unit under the circumstance that the rated voltage is up to 450/750V AC.

Product Characteristics RS-485 cable features of high flexible and wear resistance, shock resistance, oil resistance, bending resistance, low noise and anti-ultraviolet. Signal stability, anti-electromagnetic interference, transmission distance of up to 1000 meters. Impedance of 120 Ω. Superior product performance, can be applied to complex industrial automation control network communication and building automation network communication, etc. Cable Structure Standard: Refer to BELDEN 9841 and BELDEN 9842 standard Conductor: 99.9999% Anaerobic annealing superfine tin plating copper wire fine twisted Insulation: Imported special PE material. Packing: High-grade cotton. Shield: Aluminum foil coating. 99.9999% Anaerobic annealing superfine tinned copper braid. Guide Line: 99.9999% strands of tinned copper ultrafine anaerobic annealing. Sheath: Mixed PVC special custom soft corrosion resistant elastomer sheath material, has excellent tensile strength and oil resistance index, gray, in accordance with the requirements of RAL 7001. Application Range RS-485 bus cable because of its low cost, simple design and has been widely used in security monitoring, intelligent transportation fields, intelligent building and industrial automation. It is widely used in various fields of high frequency signal transmission, superior product performance, applied to complex industrial automation control network communication and building automation network communication occasions.

Introduction PUR outer sheath anti-distortion welding cable as the power control and signal transmission, suitable for installation in torsion and bending stresses at the same time the existence of a variety of welding equipment, such as welding robots and manipulators, automatic gun, auto welding production line welding robot and robot connections and assembly, also suitable for connecting a rotary-type or lift table. Industrial Robot consists of three basic parts the body, drive system and control system. The body includes the base and implementing agencies, including the arm, wrist and hand. Drive system includes power plant and transmission mechanism for the actuator to produce a corresponding action. Control system is programmed in accordance with the input of the drive system and actuators sending a command signal to achieve signal control. Robot Cable Covers: Servo motor cable, Encoder cable, Signal control cable, Data cable bus and servers. Different from 2D drag chain cable, robot cable shows a higher performance. One hand, it requires the cable should have a high degree of anti-torsion ability to adapt equipment 3D motion. Another hand, the cable is completely exposed to the industrial field, welding sparks, cooling water, oil and other environmental factors is exist, so it should have the abilities to defend them. Currently, the robot cable is mainly used for automobile assembly and production, food processing, paper, beverages and other automated production lines. We can provide a full range of robot cable products, including servo motor cable, encoder cable, signal control cable, data cable bus and servers, besides we can also customize products according to your requests. Feature • Optimized product structure, with higher flexibility, minimum bend radius up to 7.5D; • Full range of products, include servo motor cable, encoder cable, signal control cable, data cable bus and servers; • Safe and reliable, robotic products provided by us have received simulation application environment tests to ensure product reliability; • Our offer cable insulation and jacketing materials used in robotics, mostly Self-developed materials have excellent performance: wear resistance, anti-torsion, chemical resistant etc.; • UL, CSA, VDE certificates on request; • In addition, we can also provide customized robot cable.

Applications: Further precise optimization improves the professional design and high resistance to bending properties of the cable, so that it continues to bend, to move freely, without tension and forced movement towline system more durable, more secure, but also can withstand a certain tension and forced movement towline system (with specific reference to the cable design requirements). Cable has excellent chemical resistance (in line with IEC811-2-1), oil resistance (in line with EN 60811-404) and mechanical properties, and excellent mechanical properties guarantee its service life greater than 800 million cycles.

Encoder is a kind of sensor, mainly used to detect mechanical movement speed, position, angle, distance, or counting, to control servo motor system including commutation, speed control and the detection of the position, so it can be used in a very wide range of applications. Servo encoder cable and feedback cable is mainly used to connect the PLC and the motor for the signals transmission and control. Signal cable was widely used in industrial electronic systems, automated production lines, storage equipment, robotics, crane equipment, packaging machinery, machine tools and metallurgy industries. We can provide a variety of standard servo systems, such as: Siemens, FANUC, MITSUBISHI and SYNTEC, etc., Excellent performance can be installed in all kinds of drag chain applications. Application Range Effective resistance to electromagnetic interference, twisted short pitch, excellent anti crosstalk characteristics, Suitable for high speed signal loop configuration. As a control and monitoring signal transmission and power connection, installed in a variety of bending occasions. Moving speed can reach 0-1-2 M / s. Characteristics • High flexible, wear resistance, shock resistance, oil resistance, bending resistance, anti-ultraviolet, Can be guaranteed to bend the use of 400-600 million times. • A great diversity of designs, can meet all levels of drag chains; • Widely products range, can provide Siemens, FANUC, MITSUBISHI and SYNTEC servo encoder cables; • Paired cores adopt excellent performance PP insulation, showing an excellent transmission performance. in addition, a layer high percentage coverage aluminum foil plus copper braid construction give the cable excellent electromagnetic interference performance; • Products meet VDE, UL, CSA, DESINA standard requirements; • Our feedback cable, excellent performance foam PE and PP used, is suitable for Siemens DRIVE CLIQ standards; • PUR jacket can be chosen, when waterproof, oil resistance, abrasion resistance is required.

Electrical equipment single wire is the main connecting cable among distribution boxes, switchgear and cable accessories. Mainly used in low-voltage lines, communications equipment, electronic distribution equipment, power distribution equipment, and other occasions, for circuit power supply and signal control. We can provide UL, VDE and GB multiple series of single-core flexible cables, widely product range, from 0.14mm to 120mm. The products on available covers: H05V-K / U, H07V-K / U, H05V2-K , H07V2-K, H05Z-K, H07Z-K, H07RN4-F, UL1007 / UL1015 / UL1061 / UL11028 and MIL standard products, BV, BVR, RV, etc. A variety of insulating materials are available: PVC, halogen-free polyolefin, PUR, EPDM, CSPE, ETFE, silicone rubber, to meet the needs of various applications. Features • Stranded fine copper conductor meets the requirements VDE 0295 5 class 5; • Widely product range, we can provide UL, VDE and GB multiple series of products; • Products with VDE, AWM, HAR, CE, UL, CCC certificates; • PVC, halogen-free polyolefin, PUR, EPDM, CSPE, ETFE, multiple insulation materials on request, can meet the needs of all kinds of occasions, such as: halogen-free, high temperature, low temperature, high flexibility and so on; • Insulation and sheath color can be customized; • In addition, we can also provide transparent insulation products.

Application and Description LiHCH TP is for use in flexible or stationary applications under low mechanical stress witd free movement witdout any tensile stress, loads or forced movements in dry, moist and wet conditions. Commonly used as connecting cable for signal, measuring, control, call-announcing and two-way intercom systems, clock installations, electronic weighing machines and electrical apparatus for office use. The halogenfree tdermoplastic jacket is flame retardant and will give off no corrosive or toxic gases in tde case of fire. Commonly installed in public buildings, laboratories, trading and transportation centers. The twisted pair design will reduce internal interference (crosstalk) while tde tinned copper braid shield offers added protection and interference-free signal and data transfers. Not permitted for outdoor use. Standard and Approval VDE 0482 part 267, VDE 0812, CE Low Voltage Directive 73/23/EEC and 93/68/EEC, ROHS compliant Cable Construction - Plain copper conductor - Stranded to DIN VDE 0295 cl. 5, IEC 60228 cl.5 - Halogen free core insulation - Color coded to DIN 47100, but witdout color repetition - Cores twisted into layers - Plastic foil separator - 85% tinned copper braid - Halogen free outer jacket Our Services 1.Professional manufacturer, 22 years manufacturing experience 2.All the inquiry will be replied in 24 hours 3.Small order can be supplied 4.New products can be designed, OEM is welcome. 5.The special package can be supplied as per the requests 6.Can use Trade Assurance