Our Video
Neotek manufactures variety of equipment for plastic industry ranging from raw materials handling, extrusion, to waste material recycling and pelletizing. Neotek’s extrusion equipment has been exported to Asia, Africa, South America, Europe and many other parts of the world.
Share
Hot Products
-
Steel Wire Reinforced (Twisted) Pipe Production lineThe special construct of three lays and steel wire can be adapted to dirrerent pressures by regulating the paramenters of the middle layer. Temperature for using is below +40 and the pressure is 1.0-3.5Mpa. performances: antistatic, fireproofing, wear-resistant,pressure-resistant,light,tough
-
PMMA Coated Lenses Sheet Production LineApplication： Widely used in instruments, instrument parts, trains, planes, elevators, mirror. Electronic products: TV、computer screen. Technology products: specimens, labels, bank counter, supermarket, stationery and any other articles for daily use. Pr
Contact Us
- Contacter: Mrs. Tang
- Tel: 86-18068054180
- Fax:
- Email: chloe@neotek.cn
-
Company Address:
No. 99, Shaojing Road, Kunshan Economic & Technlogy Development Zone, Kunshan City, Jiangsu Province, China
Products
Steel Wire Reinforced (Twisted) Pipe Production line
The special construct of three lays and steel wire can
be adapted to dirrerent pressures by regulating the paramenters of the middle
layer. Temperature for using is below +40 and the pressure is 1.0-3.5Mpa.
performances: antistatic, fireproofing,
wear-resistant,pressure-resistant,light,tough
PMMA Coated Lenses Sheet Production Line
Application：
Widely used in instruments, instrument parts, trains, planes, elevators,
mirror. Electronic products: TV、computer
screen.
Technology
products: specimens, labels,
bank counter, supermarket, stationery and any other articles for daily use.
Processing
rang:
Thickness: 0.8-10mm Width: 800-2000mm
PC, PMMA, PS, MS Board Extrusion Line
Characteristic:
The transmission of light: good pervious to light performance, ageing resistance
Weather resistance: UV co-extrusion processing, can resist UV damage
Impact resistance, impact strength is common glass of 250 to 300 times
Flame retardant: national test belongs to the B1 level, no fire, no poison
Temperature tolerance: PC board in the range of 40 degrees below zero to 120 degree does not affect the plate quality, stable physical properties
Portability: light weight in handling and installation, can cold bending , hot forming
Good sound insulation: sound insulation effect, is the first selection of highway noise barrier materials both at home and broad
Processing range: the maximum wide 2 m, thickness range 1.5-15 mm
Small Co-Extruder
For marking line, surface co-extrusion, normally we use small co-extruder.
Model
ZJ20/20
ZJ25/20
ZJ30/25
ZJ35/25
ZJ45/25
ZJ50/25
Power of drive(kw)
0.55
2.2
3
5.5
7.5
7.5
11
Screw diameter
20
25
30
35
45
50
L/D ratio
20
20
25
25
25
25
Screw material
& productivity
(kg／h)
PE, PP
1
4
PVC
8
12
18
22
25
PMMA, ASA
10
15
20
22
Parallel twin screw extruder
SJP parallel twin screw extruder is applicant for PVC powder material, with different mould and downstream equipment, it can produce pipe, profile, plate&sheet and pelletizing.
Model
SJP75
SJP90
SJP110
SJP120
SJP130
Driving power, kw
45
55
75
110
132
Screw diameter, mm
75
90
110
120
130
L/D
26-36
26-36
26-36
26-36
26-36
Screw rotation speed, rpm
45
45
45
45
45
PVC output capacity, kg/h
220-350
280-460
350-650
500-800
680-1000
Conical twin screw extruder
SJZ Conical Twin screw extruder is application for PVC powder material, with different mould and downstream equipment, it can produce pipe, profile, plate & sheet, and pelletizing
For pipe application
Model
SJZ45/90
SJZ50/105
SJZ55/110
SJZ65/132
SJZ80/156
SJZ92/188
Motor power
15
18.5
22
37
55
110
Screw diameter
45/90
51/105
55/110
65/132
80/156
92/188
Screw rotation speed
45
45
45
45
34.7
34.7
Output capacity(PVC)
100
120
150
250
450
800
For PVC & WPC profile application
Model
SJZ45/90
SJZ50/105
SJZ55/110
SJZ65/132
SJZ80/156
SJZ92/188
Motor power
15
18.5
22
30-37
55
110-132
Screw diameter
45/90
51/105
55/110
65/132
80/156
92/188
Screw rotation speed
34.7
34.7
34.7
34.7
34.7
34.7
Output capacity(PVC)
60-80
80-100
120
150-250
250-400
500-700
Single screw extruder
The single-screw extruder is developed by our company adopting latest advanced technology. Screw optimizes composing separate type screw and mixing parts. Barrel optimizes composing groove barrel and lengthened feeding segment. There is advantage as following by using separate type screw and groove barrel together:
1. It's optimized during material melting process. Thus get more extrusion throughput.
2. It is realized extruding melt material in low temperature.
3. Cutting function is caused through separate clearance and it makes material equal well.
4. It's controlled during melt plasticization process. Therefore only granule smaller than separate clearance can enter melt channel.
5. Wide manufacture range for different materials. It's suitable for all kind of polyolefin materials and specially for material for HDPE, PP, ABS pipe.
Steel Wire Reinforced (Twisted) Pipe Production line
The special construct of three lays and steel wire can
be adapted to dirrerent pressures by regulating the paramenters of the middle
layer. Temperature for using is below +40 and the pressure is 1.0-3.5Mpa.
performances: antistatic, fireproofing,
wear-resistant,pressure-resistant,light,tough
PMMA Coated Lenses Sheet Production Line
Application：
Widely used in instruments, instrument parts, trains, planes, elevators,
mirror. Electronic products: TV、computer
screen.
Technology
products: specimens, labels,
bank counter, supermarket, stationery and any other articles for daily use.
Processing
rang:
Thickness: 0.8-10mm Width: 800-2000mm
PC, PMMA, PS, MS Board Extrusion Line
Characteristic:
The transmission of light: good pervious to light performance, ageing resistance
Weather resistance: UV co-extrusion processing, can resist UV damage
Impact resistance, impact strength is common glass of 250 to 300 times
Flame retardant: national test belongs to the B1 level, no fire, no poison
Temperature tolerance: PC board in the range of 40 degrees below zero to 120 degree does not affect the plate quality, stable physical properties
Portability: light weight in handling and installation, can cold bending , hot forming
Good sound insulation: sound insulation effect, is the first selection of highway noise barrier materials both at home and broad
Processing range: the maximum wide 2 m, thickness range 1.5-15 mm
Small Co-Extruder
For marking line, surface co-extrusion, normally we use small co-extruder.
Model
ZJ20/20
ZJ25/20
ZJ30/25
ZJ35/25
ZJ45/25
ZJ50/25
Power of drive(kw)
0.55
2.2
3
5.5
7.5
7.5
11
Screw diameter
20
25
30
35
45
50
L/D ratio
20
20
25
25
25
25
Screw material
& productivity
(kg／h)
PE, PP
1
4
PVC
8
12
18
22
25
PMMA, ASA
10
15
20
22
Parallel twin screw extruder
SJP parallel twin screw extruder is applicant for PVC powder material, with different mould and downstream equipment, it can produce pipe, profile, plate&sheet and pelletizing.
Model
SJP75
SJP90
SJP110
SJP120
SJP130
Driving power, kw
45
55
75
110
132
Screw diameter, mm
75
90
110
120
130
L/D
26-36
26-36
26-36
26-36
26-36
Screw rotation speed, rpm
45
45
45
45
45
PVC output capacity, kg/h
220-350
280-460
350-650
500-800
680-1000
Conical twin screw extruder
SJZ Conical Twin screw extruder is application for PVC powder material, with different mould and downstream equipment, it can produce pipe, profile, plate & sheet, and pelletizing
For pipe application
Model
SJZ45/90
SJZ50/105
SJZ55/110
SJZ65/132
SJZ80/156
SJZ92/188
Motor power
15
18.5
22
37
55
110
Screw diameter
45/90
51/105
55/110
65/132
80/156
92/188
Screw rotation speed
45
45
45
45
34.7
34.7
Output capacity(PVC)
100
120
150
250
450
800
For PVC & WPC profile application
Model
SJZ45/90
SJZ50/105
SJZ55/110
SJZ65/132
SJZ80/156
SJZ92/188
Motor power
15
18.5
22
30-37
55
110-132
Screw diameter
45/90
51/105
55/110
65/132
80/156
92/188
Screw rotation speed
34.7
34.7
34.7
34.7
34.7
34.7
Output capacity(PVC)
60-80
80-100
120
150-250
250-400
500-700
Single screw extruder
The single-screw extruder is developed by our company adopting latest advanced technology. Screw optimizes composing separate type screw and mixing parts. Barrel optimizes composing groove barrel and lengthened feeding segment. There is advantage as following by using separate type screw and groove barrel together:
1. It's optimized during material melting process. Thus get more extrusion throughput.
2. It is realized extruding melt material in low temperature.
3. Cutting function is caused through separate clearance and it makes material equal well.
4. It's controlled during melt plasticization process. Therefore only granule smaller than separate clearance can enter melt channel.
5. Wide manufacture range for different materials. It's suitable for all kind of polyolefin materials and specially for material for HDPE, PP, ABS pipe.
