VH75305
Short Description
• Item: VH75305 bundling tape
• Description: VH75305 bundling tape is a universal single-sided tape. It is coated with pressure sensitive adhesive on the surface of a uniaxially stretched polypropylene film.
Product Data
• Description: VH75305 bundling tape is a universal single-sided tape. It is coated with pressure sensitive adhesive on the surface of a uniaxially stretched polypropylene film.
|
Product structure: |
|
|
Substrate: |
MOPP (uniaxially stretched polypropylene) |
|
Glue: |
Acrylic glue |
|
Substrate color: |
Blue |
|
Features: |
|
|
It is widely attached, removes no residue |
|
|
Modified acrylic glue can be bonded with low surface energy materials and has a good bonding effect |
|
|
It can replace equivalent products (3M8898 TESA4298) |
|
• Typical adhesive properties:
• Note: The following technical parameter information is typical, representative reference data, not standard.
• Standard width standard length
• Material width: 18 mm (0.71 inch), 24 mm (0.94 inch)
• Material length: 55 m (60 yards)
• Core Size (ID): 3 inch (76.2 mm)
• Storage conditions
• It is recommended to store in an indoor temperature of 4-26℃, relative humidity of 40-50%, clean, dry environment.
• Chemical resistance test:
• The sample was attached to a stainless steel plate and waited for 24 hours, then the prepared sample was immersed in the chemical for 4 hours.
• Shelf life:
• Two years after the date of manufacture, the product should be stored at 22 ° C, 50% relative humidity.
• Packaging: The processed tape needs to be packed in a plastic bag with good sealing properties.
• Other notes:
• In order to enhance the adhesion of the tape, the surface of the object to be coated needs to be dry and clean, and it is usually wiped with isopropanol or heptane.
• Note:
• When using solvents, please refer to the instructions and precautions provided by the solvent supplier.
• The best condition for the adherend to be bonded is at room temperature or slightly higher, and the surface temperature of the adherend is lower than 10 °C, which makes the glue hard and does not maximize fully bonding the surface of the material. The initial adhesion of the product can be improved by applying pressure.
Application
• Note: The following technical parameter information is typical, representative reference data, not standard.
|
ASTM Test Method |
|
|
Stainless steel sheet peeling force: 7.5N/ inch width |
D-3330 |
|
Tensile strength: 160 lb/inch width (700 N/ inch width) |
D-3759 |
|
Breaking elongation: 32 % |
D-3759 |
|
Total thickness 4.637mil (0.11 mm) |
D-3652 |
• Standard width standard length
• Material width: 18 mm (0.71 inch), 24 mm (0.94 inch)
• Material length: 55 m (60 yards)
• Core Size (ID): 3 inch (76.2 mm)
• Storage conditions
• It is recommended to store in an indoor temperature of 4-26℃, relative humidity of 40-50%, clean, dry environment.
• Chemical resistance test:
• The sample was attached to a stainless steel plate and waited for 24 hours, then the prepared sample was immersed in the chemical for 4 hours.
|
Chemical resistance test: |
||
|
Chemicals |
Appearance |
Edge soaking |
|
visualization |
Millimeter |
|
|
Isopropyl alcohol |
No change |
1 |
|
Water 48 hours |
No change |
0 |
|
PH4 |
No change |
0 |
|
PH10 |
No change |
0 |
|
Temperature resistance test: |
||
|
120 ℃ 24 hours: |
no change in visual observation |
|
|
40 ℃ 72 hours: |
||
|
Anti-moisture performance test: |
||
|
38 ℃ 24 hours 100% relative humidity: |
no change in appearance, good adhesion. |
|
• Shelf life:
• Two years after the date of manufacture, the product should be stored at 22 ° C, 50% relative humidity.
• Packaging: The processed tape needs to be packed in a plastic bag with good sealing properties.
• Other notes:
• In order to enhance the adhesion of the tape, the surface of the object to be coated needs to be dry and clean, and it is usually wiped with isopropanol or heptane.
• Note:
• When using solvents, please refer to the instructions and precautions provided by the solvent supplier.
• The best condition for the adherend to be bonded is at room temperature or slightly higher, and the surface temperature of the adherend is lower than 10 °C, which makes the glue hard and does not maximize fully bonding the surface of the material. The initial adhesion of the product can be improved by applying pressure.
• It is used in the packaging needs of various industrial production. Typical applications include bundling reinforcement, bundling, door frame closure, and fixing equipment.
• This tape supports a certain degree of rigidity and excellent abrasion resistant, moisture and rub resistance. Pressure sensitive adhesives are customized to adhere to most fiberboard surfaces and a wide variety of plastic and metal surfaces and are removed without leaving residual on the surface of the substrate. We recommend that after the test is completed, determine the surface suitability of the adherend before making a selection to buy.
• This tape supports a certain degree of rigidity and excellent abrasion resistant, moisture and rub resistance. Pressure sensitive adhesives are customized to adhere to most fiberboard surfaces and a wide variety of plastic and metal surfaces and are removed without leaving residual on the surface of the substrate. We recommend that after the test is completed, determine the surface suitability of the adherend before making a selection to buy.
TOP
Mobile phone quick desktop
Supplier portal Website:www.x-cloud.com/supplier
© 1999-2015 x-cloud.com. All rights reserved. 沪ICP备12049434号-2