Torsion-Resistant Metal Fittings

Home > Products > Metal Cable Gland > Torsion-Resistant Metal Fittings > Torsion-Resistant Metal Fittings

Information

Flat-hole cable gland is a gland of a wire and cable, which is also a suitable cable for connecting the cable and also protects the cable, so it does not escape. The cable glands are placed in different categories depending on whether the glands are used in the general processing industry or need to be protected against the risk of excessive temperature or explosion. Into the glands of the cable armor or armor-free layer and a different type of gland will be required for the variety. Gland itself, can be made of metal, such as copper or aluminum, or plastic, the material is useful in different environments.

Specifications

Thread specifications:	Metric thread, PG thread, G(PF) thread and NPT thread (No nut A part is attached).
Product description:	The wisdom of the extended spring coil, extend it to get a similar casing protection effect, not only can be waterproof tensile effect also successfully completed to prevent the wire and the risk of excessive bending Angle, the material of nickel plating can be corrosion resistant, resistant to acid and alkali. This new concept of the new joint can fully be applied to all areas.
Protection Level :	Within the scope of the provisions of card buckle, and use of type O sealing screw tight tight head, achieve IP68-5 bar.
Working temperature:	- 80℃ ~ + 280 ℃ .(Geomagnetic)
Material:	A, C, F parts to advanced copper alloy plating nickel, B and D part of the high and low temperature resistant silicon.
Order No:	CCMA12-P-06,CCMA16-P-08,CCMA20-P-12 etc.

Thread Size		Order No (B/G/P/N/R/W)	Outer diameter of cable ∮mm	Thread outside diameter C1 mm	Length of thread C2 mm	Spanner diameter A&F mm	Packing for reference pcs
Thread Size		Order No (B/G/P/N/R/W)	Outer diameter of cable ∮mm	Thread outside diameter C1 mm	Length of thread C2 mm	Spanner diameter A&F mm	Packing for reference pcs
M	M10*1.5	CCMA10-P-06	2.5 ~ 6	10	6	12 / 14	50
	M12 X 1.5	CCMA12-P-06	2.5 ~ 6	12	6	12 / 14
		CCMA12-P-065	3 ~ 6.5	12	6	12 / 14
		CCMA12-P-08	4 ~ 8	12	7	12 / 18
	M16 X 1.5	CCMA16-P-08	4 ~ 8	16	7	18 / 18
	M16 X 1.5	CCMA16-P-10	6 ~ 10	16	8	18 / 20
	M18 X 1.5	CCMA18-P-10	6 ~ 10	18	8	20 / 20
	M20 X 1.5	CCMA20-P-10	6 ~ 10	20	9	22 / 20
	M20 X 1.5	CCMA20-P-12	7 ~ 12	20	9	22 / 22
PG	PG 7	CCPA7-P-06	2.5 ~ 6	12.5	6	12 / 14	50
	PG 9	CCPA9-P-08	4 ~ 8	15.2	7	18 / 18
	PG 11	CCPA11-P-10	6 ~ 10	18.6	8	20 / 20
	PG13.5	CCPA13.5-P-12	17 ~ 12	20.4	9	23 / 22
G (PF)	G 1/4	CCGA 1/4-P-06	2.5 ~ 6	13.15	6	12 / 14	50
	G 3/8	CCGA 3/8-P-08	4 ~ 8	16.66	7	18 / 18
	G 1/2	CCGA 1/2-P-12	7 ~ 12	20.95	9	23 / 22
NPT	NPT 3/8	CCNA 3/8-P-08	4 ~ 8	17.05	7	18	50
NPT	NPT 1/2	CCGA 1/2-P-08	7 ~ 12	21.22	8	22	50

Products