Best Seller RS Series Ram Rubber Strainer Supplier

Shanghai Deren Rubber And Plastic Machinery Co., Ltd.

Home > Products > Precision Preformer > RS Series Ram Rubber Strainer > RS Series Ram Rubber Strainer

RS Series Ram Rubber Strainer

153

Description

RS ram rubber strainer can strain various rubber compound, such as such as butadiene rubber, butyl rubber, fluorine rubber and silicon rubber and strain plastic and rubber mixture. The strain accuracy is up to 200 meshes. Compared to the screw type strainer, the compound has no temperature increase and no scorch in the whole straining process; it can strain the rubber compound after adding accelerant. It is with humanized design and easy operation, and less force to open ram head, with comprehensive safety control and impressive notice to ensure better security performance.

Technical Parameter

Items	Unit	RS150	RS200	RS250	RSH200	RSH250
Barrel inside diameter	mm	150	200	250	200	250
Total power	KW	14	14	17.5	17.5	17.5
Max. extruding pressure	MPa	36.8	20.7	20.7	40	25/36
Max. barrel temperature	°C	95	95	95	95	95
Single feeding volume	L	12	25	60	25/40	60
Ouutput/h(98% of the compound type)	Kg	100	200-400	300-600	300-600	500-800
Filtration Accuracy (95% of the compound type)	Mesh(Max.)	300	250	250	300	300
External dimension(L×W×H)	m	2.78×1.2×1.62	2.85×1.2×1.64	3.97×1.25×1.64	3.7×1.35×1.85	4.9×1.35×1.85
Weight	t	2	2.17	3.2	4.1	4.5

1、Energy Conservation:

More energy saving than the screw machine, the average power consumption per hour is about 7kw/h.

2、High Efficiency:
The capacity of 300~900kg per hour. For example: for EPDM rubber, hardness of 60 Shore, and straining mesh size#100, then the capacity will be 600kg/h.

3、High Accuracy:
with the ram to force through forward,the pressure of the standard equipment is up to 20MPa, and the high pressure equipment can reach 40MPa,It is mainly used of EPDM/NBR/FKM and other common rubber material, and maximum straining accuracy is up to mesh#300.
The straining accuracy can reach mesh#500 for silicon rubber.This machine has higher straining accuracy. compared with the screw machine.

4、Stabilization:
The ram push forward process is not heating-up compared with the screw extrusion,It is can adding vulcanizing agent and other rubber accelerant for straining,to stop rubber scorching of thing ever happening.

5、Convenient:
The barrel adopts separated structure,center extended,It is easy to clean, easy to replace the rubber, no clean dead Angle;

6、Safety:
Reliable control system and interlock device ,avoiding work injury.

7、PLC and touch screen control ,can store process parameter to make it convenient for extracting at any times ,and low requirement for the operators.

Products

Precision Preformer