Red Film Gray Acrylic Foam Double Side Tape
Short Description
Item: red film gray acrylic foam double side tape
Description: red film gray acrylic foam double side tape is formed by coating acrylic pressure sensitive adhesive on both side of acrylic foam.
Product Data
Description: red film gray acrylic foam double side tape is formed by coating acrylic pressure sensitive adhesive on both side of acrylic foam.
|
Product structure: |
|
|
Substrate: |
Acrylic foam |
|
Glue: |
Acrylic glue |
|
Substrate color: |
gray |
|
Backing paper color |
Red PE film |
|
Features: |
|
|
It is widely bonding, removes no residue |
|
|
Modified acrylic glue can be bonded with low surface energy materials and has a good bonding performance |
|
|
It can replace equivalent products |
|
Typical adhesive properties:
Note: The following technical parameter information is typical, representative reference data, not standard.
Standard width standard length
Material width: 15mm(0.59inch)
Material length: 33m (36 yards)
Core Size (ID): 3 inch (76.2 mm)
Storage conditions
It is recommended to store in an indoor temperature of 4-26℃, relative humidity of 40-50%, clean, dry environment.
Chemical resistance test:
The sample was attached to a stainless steel plate and waited for 24 hours, then the prepared sample was immersed in the chemical for 4 hours.
Shelf life:
Two years after the date of manufacture, the product should be stored at 22 ° C, 50% relative humidity.
Packaging: The processed tape needs to be packed in a plastic bag with good sealing properties.
Other notes:
In order to enhance the adhesion of the tape, the surface of the object to be coated needs to be dry and clean, and it is usually wiped with isopropanol or heptane.
Note:
When using solvents, please refer to the instructions and precautions provided by the solvent supplier.
The best condition for the adherend to be bonded is at room temperature or slightly higher, and the surface temperature of the adherend is lower than 10 °C, which makes the glue hard and does not maximize fully bonding the surface of the material. The initial adhesion of the product can be improved by applying pressure.
Application
Note: The following technical parameter information is typical, representative reference data, not standard.
|
ASTM Test Method |
|
|
Stainless steel sheet peeling force: 39.8N/ inch width |
D-3330 |
|
Tensile strength: 70 lb/inch width (240 N/ inch width) |
D-897 |
|
Total thickness: 31.79mil( 0.8mm) |
1000 |
Standard width standard length
Material width: 15mm(0.59inch)
Material length: 33m (36 yards)
Core Size (ID): 3 inch (76.2 mm)
Storage conditions
It is recommended to store in an indoor temperature of 4-26℃, relative humidity of 40-50%, clean, dry environment.
Chemical resistance test:
The sample was attached to a stainless steel plate and waited for 24 hours, then the prepared sample was immersed in the chemical for 4 hours.
|
Chemical resistance test: |
||
|
Chemicals |
Appearance |
Edge soaking |
|
visualization |
Millimeter |
|
|
Isopropyl alcohol |
No change |
1 |
|
Water 48 hours |
No change |
0 |
|
PH4 |
No change |
0 |
|
PH10 |
No change |
0 |
|
Temperature resistance test: |
||
|
120 ℃ 24 hours: |
no change in visual observation |
|
|
40 ℃ 72 hours: |
||
|
Anti-moisture performance test: |
||
|
38 ℃ 24 hours 100% relative humidity: |
no change in appearance, good adhesion. |
|
Shelf life:
Two years after the date of manufacture, the product should be stored at 22 ° C, 50% relative humidity.
Packaging: The processed tape needs to be packed in a plastic bag with good sealing properties.
Other notes:
In order to enhance the adhesion of the tape, the surface of the object to be coated needs to be dry and clean, and it is usually wiped with isopropanol or heptane.
Note:
When using solvents, please refer to the instructions and precautions provided by the solvent supplier.
The best condition for the adherend to be bonded is at room temperature or slightly higher, and the surface temperature of the adherend is lower than 10 °C, which makes the glue hard and does not maximize fully bonding the surface of the material. The initial adhesion of the product can be improved by applying pressure.
It is used in the packaging needs of various industrial production. Typical applications include bundle reinforcement, bundling, door frame closure, and device fixing. This tape supports a certain degree of rigidity and excellent wear, moisture and rub resistance. Pressure sensitive adhesives are customized to adhere to most fiberboard surfaces and a wide variety of plastic and metal surfaces and are removed without leaving residual on the surface of the substrate. We recommend that after the test is completed, determine the surface suitability of the sticker before making a selection to buy.
TOP
Mobile phone quick desktop
Supplier portal Website:www.x-cloud.com/supplier
© 1999-2015 x-cloud.com. All rights reserved. 沪ICP备12049434号-2