Pu Sandwich Panel Roll Forming Machine
Product Details
PU Sandwich Panel Machine
Brief introduction
Our PU sandwich panel machine is one line that integrates advanced mechanical, chemical, electrical, hydraulic, and pneumatic technologies. Due to its high efficiency and simple operation, this forming machine is widely used in the construction of steel structure enclosures, cold storages, and mobile buildings. In order to satisfy various customer requirements, we design and manufacture PU sandwich panel lines in different specs, models and configurations.
Main Components
PU sandwich panel machine mainly consists of hydraulic uncoiler, film covering system, roll forming machines, polyurethane foaming system, double belt system, automatic cutting device, electric control system, hydraulic system, and pneumatic system.
Technical Parameters
Brief introduction
Our PU sandwich panel machine is one line that integrates advanced mechanical, chemical, electrical, hydraulic, and pneumatic technologies. Due to its high efficiency and simple operation, this forming machine is widely used in the construction of steel structure enclosures, cold storages, and mobile buildings. In order to satisfy various customer requirements, we design and manufacture PU sandwich panel lines in different specs, models and configurations.
Main Components
PU sandwich panel machine mainly consists of hydraulic uncoiler, film covering system, roll forming machines, polyurethane foaming system, double belt system, automatic cutting device, electric control system, hydraulic system, and pneumatic system.
1. Components of machine:
2. Technical parameter:
3. main process flow:
Decoiler – roll forming—Polyurethane Foaming and Injecting—Heating-- Compressing—Cutting--– product to run out table
| Hydraulic Decoiler (5MT capacity) | 2set | For decoiler the steel coils |
| Roll forming system | 2set | For corrugated roofing panel and upper surface, it is made according to your request profiles |
| Traction platform | 1set | For steel sheet to foaming system |
| Polyurethane Foaming and Injecting machine | 1set | It is from local market, you had better buy from Italy |
| Heating device | 1set | It is from local market, you had better buy from Italy |
| Double belt conveyor (23m long) | 1 set | |
| Hydraulic power system | 1 set | |
| Controlling system | 3 set | |
| Cutting system | 1set | |
| Side mold | 5sets | For different thickness |
| Run out table | 1set | For final PU panel |
2. Technical parameter:
| Items | Specification | |
| Sandwich Panel Spec | Width | 1000mm |
| Minimum Thickness | 40mm | |
| Maximum thickness | 200mm | |
| Min. cutting length: | 3 meters | |
| Max. stacking length: | 15m | |
| Steel sheet Spec(we can design as per buyer's special requirement ) | Type | Pre-painted steel coils |
| Thickness | 0.3-0.8mm | |
| Feeding coil width | 1250mm | |
| Maximum coil weight | 5tons | |
| Inner dia. of coil | 508mm, 610mm | |
|
Whole Line Spec |
Working speed | max.8m/min (adjustable) |
| Total length | About 90m | |
| Double belt conveyor | 23m | |
| Control mode | Misubishi | |
| Pouring pressure | 150-200Bar | |
| Work height | 1200mm | |
| Stacking height | 1000mm | |
| Total power | About 200kw | |
| Electric condition | 380V/3phase/50Hz or as per customers requirement | |
| Control voltage: | 24V,110V ,220v | |
| Air pressure: | 0.7Mpa (for buyer to prepare | |
| Containers need | 16pc containers for loading | |
| Weight | About 150tons total | |
| Machine line area need | 100meters * 10meters (length * width) | |
| The workshop need 5tons movable crane for lifting the steel coils | ||
3. main process flow:
Decoiler – roll forming—Polyurethane Foaming and Injecting—Heating-- Compressing—Cutting--– product to run out table
TOP
Mobile phone quick desktop
Supplier portal Website:www.x-cloud.com/supplier
© 1999-2015 x-cloud.com. All rights reserved. 沪ICP备12049434号-2