Top brand Construction
Machinery supplier
Guess you like the video
H13
Hot working tool steel H13

RELATED SPECIFICATIONS:

Europe EN 1.2344
Germany DIN X40CrMoV5-1
Great Britain BS 4659 BH13
USA AISI H13A
Japan JIS-SKD61


DESCRIPTION:
Hot worked tool steel with good tensile and wear resistance properties. 

APPLICATIONS:
General purpose hot worked tool steel used in a wide range of applications - Aluminium extrusion
dies, backers and bolsters, stems and mandrels, die casting dies and forging inserts. 


TYPICAL CHEMICAL ANALYSIS:

C Si Mn Cr Mo V P S
0.32-0.45 0.8-1.2 0.2-0.5 4.75-5.50 1.10-1.75 0.85-1.20 0.03 max. 0.03 max.


HARDENING:
Hardening should be done in controlled atmosphere, vacuum or fluidised bed furnaces. Preheat slowly to 450/800°C then raise to 1000/1030°C, holding for sufficient time to attain uniformity
throughout the tool, air cool.


TEMPERING:
Tempering should be carried out immediately after air quenching. Heat to 550/650°C, holding for one to three hours. Tools benefit from multitempering and a minimum of two tempers is recommended. Care should be taken to ensure tools cool to room temperature in between tempers. Also suitable for both bath and gas nitriding.

SIZES AVAILABLE:
Round: 20mm - 640mm

Flat:     Thickness ≤ 1000mm

Forgings also available for stems, containers and inner linings. 



TOP
×
Login

Not a member yet? Create an account

I'am a supplier Login
×
Register

Already got an account? Login

Become a supplier Register