Introduction
Series floor decking forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. It’s best to be used as the floor of high buildings, and the cost of such floor is low.

Standard Equipment of Machine

Passive uncoiler	1pcs
Guiding equipment	1set
Rolling forming equipment	1set
Embossing equipment	1set
Post-cut equipment	1set
Hydraulic station	1pcs
PLC controlling desk	1pcs
Supporter table	2pcs

• 
• 
• 

Item NO	Description	Offered specification
1.0	Roll Forming Machine	YX51-334-1002, the profile as the drawing
1.1	Material width	Galvanized steel sheet & pre-painted steel sheet up to 235mpa to 345Mpa, 1250mm width
1.2	Rolling Speed	15-20m/min(not include cutting time), normal 18meters/minute
1.3	Rolling Thickness	0.75-1.2mm
1.4	Control System	PLC & Transducer（Mistubishi）
1.5	Un Coiler	5tons hydraulic un-coiler
1.6	Roller Stations	33 stations
1.7	Roller Material	45#forge steel, coated with chrome in 3~4um, all rollers are made by CNC and heat treatment
1.8	Shaft Material and DIA	￠80mm, material is 45# forge steel, all shaft after lathe machining using grinding machine to grind and heatment
1.9	Main Motor Power	22kw (two motors, each in 11kw)
1.10	Cutting Way	Hydraulic cutting Including Pressing the two heads Of the panel to make the crimping
1.11	Cutter Material	Cr12 Mold steel material with quench HRC58-62°with quench, and heat treatment
1.12	Hydraulic Power	7.5kw
1.13	Type Of The Stations	Wall panel, thickness in 20mm
1.14	Tolerance	10m+-2mm
1.15	Power Source	380V, 50HZ,3 phase,
1.16	Way Of Drive	45# forged steel with frequency quenching, 16A
1.17	Color Of The Machine	Mist Green
1.18	Size of the machine	L*W*H   26m*1.5m*1.5m
1.19	Cutting total frame	45#, but will be heat treatment in frame shape to add rigidity and tenacity
1.20	Embossing rollers	2 sets, the rollers are made by Cr12 Mold steel material with quench HRC58-62°with quench, and heat treatment
1.21	Transmission	By chain
1.22	Cutting total frame	45#, but will be heat treatment in frame shape to add rigidity and tenacity