Top brand Construction
Machinery supplier
Guess you like the video
DRL Cold Feed Precision Preformer
29
Description
Traditional preform products (blanks) are produced by precision preform machines with fixed speed and precise plunger displacement control. The production process is not continuous. Because special mixers are needed to provide preheated and mixed rubber, and each batch must be re-fed, the labor intensity is considerable. Extrusion/gear pump technology was used in cold feed preform to improve the traditional rubber blank manufacturing technology.

Strip cold rubber into the extruder feeding port automatically after plasticizing, preheating, and then sent to the entrance to the gear pump, the pump driven into the die, the die of the rotating cutter will cut into the required size, rubber in the system, the use of gear pump technology for extrusion efficiency and product precision provides important guarantee. Gear pump inside the rotor and bearings have been tested for many years proved very reliable, without frequent replacement.

The control part of the system is a special PLC. Pressure sensors are installed at the inlet and outlet of the gear pump to ensure that the pressure at the inlet of the gear pump is maintained at a certain level. In addition, the extrusion speed can be controlled by adjusting the inlet pressure of the gear pump, so that the rubber compound can be injected into the gear pump stably under the required pressure conditions.


Technical Description of DRL Series Cold Feed Rubber Precision Preformer

1 Cold Feed Precision Preformer is to cut the mixing rubber into the shape and weight required by customers. The weight accuracy of blank is controlled within ±1%.
2 PLC control, process parameter storage, direct data call instruction, easy operation.
3 The screw and barrel are electric disengaging from the structure, which can effectively reduce the labor intensity, facilitate the replacement of rubber and facilitate the cleaning.
4 Conveyor net cover and conveyor adopt stainless steel material to prevent rubber pollution.
5 Electronic scale closed circuit feedback, one key to calibrate the weight of rubber blank.
6 Equipment fault alarm and icon display fault location, regularly remind workers to spot check and calibrate the weight of the rubber blanks.
7 The machine head, cutting knife and other devices are interlocked, and all-round protection is provided to effectively avoid the occurrence of work-related injuries.
8 Searchlight with the machine head, easy to clean, to avoid the situation of bad cleaning corner.
9 The system pressure and extrusion pressure are displayed digitally on the touch screen.
10 When the new product is trial-produced, the PLC operation provides reference data to further simplify the operation process.
11 All machine heads are sealed with stainless steel to prevent rubber from spilling on the ground (polluting the environment, waste of rubber, etc.).
12 Continuous process and high production efficiency:
DRL cold feeding preformer can input strip rubber uninterruptedly to produce high-precision blank, so it does not need to consume manpower to continuously add material.Because of continuous production, there is no unqualified rubber blank in the start-up and shutdown stages of hydraulic precision pre-forming machine, which reduces material loss and greatly improves production efficiency.Because of the continuous production, there is no unqualified rubber blank produced under the start-up and shutdown stages of hydraulic precision preformer, which reduces material loss and greatly improves production efficiency.


Technical Parameter

Items

Unit

DRL75

DRL90

DRL120

Screw diameter

mm

75

90

120

Draw Ratio of Screw

L/D

12:1

12:1

12:1

Screw rotation speed

Rpm

6-60

6-60

6-60

Speed of gear pump

Rpm

4-50

4-50

4-50

Cutter speed

Rpm

23-400

23-400

23-400

Total power

KW

45

55

75

Maximum extrusion pressure

MPa

35

35

35

Temperature Controlled by Mould Temperature Machine

°C

20-95

20-95

20-95

Max.die Diameter

mm

80

125

190

Rubber blank weight range

g

0.1-100

0.1-500

0.1-2000

Weight accuracy (99% compound)

Percentage

≤±0.8%

≤±0.8%

≤±0.8%

Filtration accuracy (99% rubber)

Mesh

≤200

≤200

≤200

Max capacity

kg/h

200

500

800

outline dimension (L×W×H)

m

4.5×1.2×1.65

5.5×1.2×1.65

6.5×1.2×1.65

Machine weight

t

3.5

4.8

8

Electronic Balance (Accuracy 0.01)

g

300

300

300/1500

Head opening type


WSAD

WSAD


WSAD

Feeding type

Cold/Hot

Cold

Cold

Cold

Electronic balance rack

m

0.44×0.44×0.96

Distance between Cutter and Die

mm

Adjustable

TOP
×
Login

Not a member yet? Create an account

I'am a supplier Login
×
Register

Already got an account? Login

Become a supplier Register