Best Seller Color Tile Sheet Roll Forming Machine Supplier

Hangzhou Luosen Co.,Ltd

Home > Products > Roll Forming Machine > Color Tile Sheet Roll Forming Machine

Color Tile Sheet Roll Forming Machine

Product Details

Introduction
Colored steel tile forming machine consists of : uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table.

Working Flow
Decoiling the coils—→Sheet Guiding—→Film Covering—→Roll Forming—→Measure Lengh —→ Cutting the Panel—→Panels to the Supporter.

Machine Features
1. Precise forming.
2. High-solid forming stand guarantees the good and uniform quality of final products
3. The operation automatically minimizes the tolerance of cutting length.

Products Feature
1. A stylish and attractive design,giving the apperance of a traditional roof tile.
2. Resistant to frost,heat,hail and gales : 100% waterproof, thanks to the lateral run-off channel on each sheet for several models.
3. The raw material can be in different color, elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.

Technical Parameters

No	Function	Description
1	Roll forming machine	Color tile sheet roll forming machine
2	Material to be corrugated and cutting	Q235, Color coated or galvanized Steel coil (PPGI or GI)
3	Thickness of Coil sheet	0.32-0.60mm.
4	Coil Width (raw material)	1250mm.
5	Effective width	1050mm
6	Decoiler Diameter	508mm or 610mm
7	Decoiler (reel) Capacity	5 tons and passive powerless decoiler
8	Roller stations	20 stations, up to final designing
9	Roller material	45#forge steel, coated with chrome, coated with chrome in 3~5um, all rollers are made by CNC and heat treatment
10	Shaft diameter	Φ80mm ,material is 45# forge steel, all shaft after lathe machining using grinding machine to grind and heat treatment
11	Transmission	By chain
12	Main Motor Power	7.5KW
13	Rolling speed	15-20m/min(not include cutting time), normal 18meters/minute
14	Working Speed	5m/min (include pressing and cutting time)
15	Hydraulic Station Power	5.5KW
16	Hydraulic Pressure	10 - 12MPa.
17	Controlling System	PLC, Main Components from Mitsubishi Japan
18	Material of Blade	Cr12 Mold steel material with quench HRC58-62°with quench, and heat treatment
19	Index Error of Length	10m±2mm.
20	Machine Total Weight	About 8,000kgs
21	Voltage	380 volts, 3 phase and 50 Hz
22	Dimension	About 9000mm × 1600mm × 1500mm (L× W× H)
23	Cutting Way	Cut to Length, any length can be cutted and covered
24	Spare parts	Enough spare parts is free for one whole guarantee year

Products