Experienced supplier of C & Z purlin roll forming machine

Hangzhou Luosen Co.,Ltd

Home > Products > Roll Forming Machine > C & Z Purlin Roll Forming Machine

C & Z Purlin Roll Forming Machine

Product Details

Introduction
C or Z Shape Purlin Forming Machine can produce many sizes of C & Z shape purlin. The whole line mainly consists of uncoiler and its base, coil sheet flattening equipment, C & Z shape forming system, punching equipment, post-cutting equipment,, hydraulic station, and controlling system.

Suitable material for production
C & Z Purlin mainly use hot roll steel strip or hot dip galvanized steel strip at thickness 1.2～3.0mm. it is roll formed by C or Z shape roll forming machine

Working Flow
Decoiling the coils—→Sheet Guiding —→Coil Strip Leveling—→Roll Forming—→Punching for horizontal hole —→Measure Length —→ Cutting the Panel—→Panels to the Supporter.

Product feature and usage
The products of C or Z shape purlin forming machine have excellent anti-bending property and are easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, exhibition center, cinema, theatre, garden and so on.

Applicable Area
Door Frame, Rail, Angle, Pallet Rack, Pack Post, Swage Beam Panel, Glass Wool Panel, Hoist Rail, Hand Rail, Car Molding, C-channel, Fire Shatter, M-bar, U-channel

Main technical specification

Item NO	Description	Offered specification
1.0	C purline roll forming machine	9 kinds sizes as the drawing
1.1	Rolling speed	15-20m/min(not include cutting time), normal 18meters/minute
1.2	Rolling thickness	1.2—3mm
1.3	Raw material	Galvanized steel sheet up to 235mpa to 345Mpa
1.4	Control system	PLC & Transducer（Mitsubishi）
1.5	Un coiler	3TON x 600 as list in the note
1.6	dimension	10000×1000×1500mm
1.7	Roller stations	18 stations + 7 rolls leveling (three rollers over four)
1.8	Roller material	Cr12 mold steel material，quench with HRC58-62, all rollers are made by CNC and heat treatment
1.9	Shaft diameter	High quality 45# high carbon steel ,Ф80mm, all shaft after lathe machining using grinding machine to grind and heat treatment
1.10	Punching mold	Cr12 mold steel material，quench with HRC58-62, all rollers are made by CNC and heat treatment
1.11	Transmission	By chain
1.12	Cutting total frame	45#, but will be heat treatment in frame shape to add rigidity and tenacity
1.13	Material of chain	45#, 15 tooth, 20A
1.14	Main motor power	15kw
1.15	Hydraulic station power	7.5kw
1.16	Hydraulic pressure	12Mpa
1.17	Way of cutting	In the way of mold with hydraulic cutting (Match 9 sets of dies)
1.18	Material of cutting blade	Cr12 Mold material with quench, and heat treatment
1.19	Tolerance	10M+-2mm
1.21	Electric source	380V, 50HZ,3 phase
1.22	Color of the machine	Mist Green
1.23	Frame	350X175H type steel weld, 16mm wall panel, 6313 bearing

Products