Experienced supplier of uns s30900 stainless steel,309 stainless steel sheet,309 stainless steel pipe

309/S30900/SUS 309TB Stainless Steel

Parameter

Alloy 309 (UNS S30900) austenitic stainless steel is typically used for elevated temperature applications. Its high chromium and nickel content provides comparable corrosion resistance, superior resistance to oxidation, and the retention of a larger fraction of room temperature strength than the common austenitic Alloy 304.

General Properties

Alloy 309 (UNS S30900) is an austenitic stainless steel developed for use in high temperature corrosion resistance applications. The alloy resists oxidation up to 1900°F (1038°C) under non-cyclic conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850°F (1010°C).

Because of its high chromium and low nickel content, Alloy 309 can be utilized in sulfur containing atmospheres up to 1832°F (1000°C). The alloy is not recommended for use in highly carburizing atmospheres since it exhibits only moderate resistance to carbon absorption. Alloy 309 can be utilized in slightly oxidizing, nitriding, cementing and thermal cycling applications, albeit, the maximum service temperature must be reduced.

When heated between 1202 – 1742°F (650 – 950°C) the alloy is subject to sigma phase precipitation. A solution annealing treatment at 2012 – 2102°F (1100 – 1150°C) will restore a degree of toughness.

309S (UNS S30908) is the low carbon version of the alloy. It is utilized for ease of fabrication. 309H (UNS S30909) is a high carbon modification developed for enhanced creep resistance. It most instances the grain size and carbon content of the plate can meet both the 309S and 309H requirements.

Alloy 309 can be easily welded and processed by standard shop fabrication practices.

STANDARDS
INDUSTEEL TRADEMARKS	UNS	ASTM	EURONORMS EN	SUS
4828 (Prev. S12)	S30900	309	1.4828	SUS 309TB

Standard	ASTM, AISI, ASME, JIS, SUS, DIN, EN, GB, BS
specification	1000mm2000mm 1219mm 2438mm or as your requirement
Surface	2B/cold rolled, hot rolled, hairline, mirror
type	Sheet/Plate, Pipe/Tube, Bar/Rod, Coil, Strip, wire, fitting ect
Thickness	0.3mm~50mm or as your requirement
Usage	Plate heat exchanger, bellows, household goods (1, 2 tableware, cabinets, indoor pipes, water heaters, boilers, bath), auto parts (windshield wipers, muffler, moldings), medical equipment, building materials, chemical, food industry , agriculture, ship parts, and so on.
Packing	interleaving paper kraft paper and wooden pallet
Delivery Time	10 days after received the deposit of T/T 10 days after received the deposit of L/C original
We can customize the size you need, please feel free to contact us!

Grade	Chemical composition
	C≤	Si≤	Mn≤	P≤	S≤	Ni	Cr
309	0.2	1.00	2.00	0.04	0.03	12.00-15.00	22.00-24.00
309S	0.08	1.00	2.00	0.045	0.03	12.00-15.00	22.00-24.00

Application

APPLICATIONS
CHEMICAL INDUSTRIES			PROCESS INDUSTRIES			WATER TREATMENT			STORAGE & TRANSPORTATION
Nitric Acid	Sulfuric Acid	Polymer& otheracids	Fertilisers	Pulp& Paper	Hydrome-tallurgy	Seawater& desalination	Freshwater &Tanks	Waste Water	Chemical Tanks	Cryogenic Tanks	Renewable

POWER GENERATION				OIL & GAS			CONSTRUCTION
Nuclear	Pollution control	Hydroelectric	Renewable	Off & Onshore & production	Refining & Gas processing	Petrochemical	Architecture	Bridges

For more technical details :
Download the complete datasheet
(1) Indicative typical values
(2) Indicative typical values for thickness 20 mm at RT for transverse direction
(3) Hardening 496°C (925°F), 4h, air cooling
(4) PREN = Cr + 3.3 Mo + 16N
(5) PRENW = Cr + 3.3(Mo + 0.5W) + 16N
(6) HT: mechanical properties depend on heat treatment

PDF: http://www.industeel.info/wp-content/uploads/2016/01/DS-INOX-SIRIUS4828v2.pdf

Products