201(1.4372) Stainless Steel Sheet/Plate

Wuxi Sino Yuan Science and Technology co.,ltd

Home > Products > Stainless Steel Sheet/Plate > 201(1.4372) Stainless Steel Sheet/Plate

Introduction

Type 201(1.4372) Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. Type 201 can be substituted for Type 301 in many applications.

Grade	201(1.4372) stainless steel sheet
Thickness	0.3-6mm
Widthness	1000mm, 1219mm, 1524mm or as customized
Length	2438mm, 3048mm, 6096mm or as customized
Brand name	LISCO
Standard	JIS, AISI, ASTM, GB, DIN, EN ,etc.
Finish	2B, Hairline, No.4, BA, 8K mirror, etc.
Certification	SGS
Packaging	Standard exporting packing; seaworthy package.
MOQ	2 Tons

Realted Products:

Stainless steel wire rod,stainless steel pipe/tube,stainless steel flat bar,stainless steel angel bar...

Applications:
201(1.4372) stainless steel can be made into plates, sheets, and coils to be used in the following:
·Restaurant equipment·cookware
·hose clamps
·piston rings
·transit car structural member
·transit car roofing/siding
·thermal window spacers
·air bag containers
·truck trailer posts and door frames ·Hose clamps.

Specification

Chemical Composition and mechanical properties:

201(1.4372)	C	Si		Mn	P		S	Ni	Cr
	≤0.15	≤1.00		5.5~7.50	≤0.050		≤0.03	0.6~1.3	16.00~18.00
tensile strength σb (MPa)			yield strength σ0.2(MPa)			elongation δ5(%)			Hardness HB
≥520			≥275			≥55-60%			≤203

tolerance range of 201 cold rolled stainless steel sheet/plate
Thickness	Large Tolerance	Normal Tolerance	Small Tolerance	No Tolerance
0.4MM	0.3-0.32	0.33-0.37	0.37-0.39	≥0.39
0.5MM	0.4-0.42	0.43-0.47	0.47-0.49	≥0.49
0.6MM	0.5-0.52	0.53-0.56	0.57-0.59	≥0.59
0.7MM	0.6-0.62	0.63-0.67	0.67-0.69	≥0.69
0.8MM	0.7-0.72	0.73-0.77	0.74-0.79	≥0.79
0.9MM	0.8-0.82	0.83-0.87	0.87-0.89	≥0.89
1.0MM	0.89-0.9	0.91-0.94	0.94-0.99	≥0.99
1.2MM	1.02-1.08	1.09-1.15	1.16-1.18	≥1.18
1.5MM	1.32-1.38	1.39-1.45	1.46-1.48	≥1.48
2.0MM	1.72-1.79	1.8-1.86	1.87-1.9	≥1.9
2.5MM	2.23-2.36	2.32-2.42	2.42-2.47	≥2.48
3.0MM	2.7-2.77	2.78-2.85	2.85-2.9	≥2.9

tolerance range of 201(1.4372) hot rolled stainless steel sheet/plate
Thickness	Large Tolerance	Normal Tolerance	Small Tolerance	No Tolerance
3.0MM	2.6-2.75	2.75-2.85	2.86-2.9	≥2.9
4.0MM	3.5-3.6	3.6-3.75	3.76-3.95	≥3.95
5.0MM	4.5-4.6	4.6-4.75	4.75-4.95	≥4.95
6.0MM	5.4-5.6	5.6-5.75	5.75-5.85	≥5.85
8.0MM	7.3-7.5	7.5-7.65	7.65-7.85	≥7.85
10.0MM	9.2-9.3	9.3-9.6	9.6-9.85	≥9.85
12.0MM	11.1-11.2	11.2-11.6	11.6-11.85	≥11.85
14.0MM	13.1-13.2	13.2-13.6	13.6-13.85	≥13.85

Products