Fiber patch panel system 1.Each port of this Cat.6 FTP patch panel has the same unaided cabling structure ,it will make sure that the performance of each port consistent. 2.The cable management and grounding device are combined in this patch panel. All kind of cables with different dimensions can be fixed on the patch panel. The shielding foil of the cables and the grounding device of the patch panel can be connected very well so that the shielding effect of this patch panel will be very outstanding. 3.According to the standard of ISO/IEC 11801:2002 CLASS E and ANSI/TIA/EIA/568-B.2-1 Cat6 Standard ,the T568A and T568B color cord are printed both on the PCB and IDC surface to give a correct guide when a engineer punch the cables. Fitting foe horizontal distribution in the equipments room and equipments connecting. 4.Connecting: RJ45 port for Cat6 FTP patch cord and IDC for horizontal distribution cables 5.Environmentalist requirement; in accord with the ROHS requirement. 6.Compatibility: compatible for all kinds of Cat6.Cat5e and Cat5 system. 7.Entire steel outer frame, with plastic powder cladding(non-electric part) and zincification cladding (shielding parts) 8.RJ45 jack: PBT frame with 50u golden phosphor bronze pins; shielding shell of the RJ45jack: brass housing with nickel-plated. IDC clip: Tinned phosphor bronze pins. 9.Testing conduction of transmitting capability: 250MHz Patch Panel catalog