Brief introduction The bottle caps neatened by the cap neatening device ,the bottle caps with mouth up are carried to the caps collecting guideway, the bottles come from other equipment of the assembly line enter the caps collecting area. The bottles move ahead with clamping of the two sides clamping device then the caps match the bottles automatically. The cap pressing device presses the caps to the pre-tight situation before rotating the caps. Under the function of three pairs of high speed rotating wearable rubber wheels, the caps match with the bottles tightly. Feature 1) Strong compatibility, suitable for various sizes of cap shape、bottle shape. 2) A pair of cap dropping and wearing device suit for all kinds of bottle caps. 3) No bottle or cap, no work. By testing, it will wipe out the skew、inverse caps and caps without aluminum foil. It has the function of fault self-examining and any other check warning control functions, so it can ensure the continuity and accuracy. 4) Operate automatically, intelligently control with the last and next process, with good harmony. Special operating person is not necessary so it can save labor cost. Main parameter Bottle height Φ20-φ250mm Capping size Φ20mm～Φ130mm（the shute is customized） Conveying direction Left-right(or right-left) Capacity 30-40 bottles/min Powder supply 220V 50-60Hz Power 1300W Weight 450kg Dimension 1500mm×1000mm×1800mm