Standard Grade Trade Name UNS No. DIN BS JIS GB/T Nickel 201 UNS N02201 LC-Ni99 (2.4068) NA12 NW2201 Ni99.0-LC N5 Specification ASTM B161, ASTM B 163, ASME SB 163, ASTM B 725, ASME SB 725, ASTM B 730, ASME SB 730, DIN 17751, BS3074, JIS H 4552, WS 2.4068, GB/T2882 Typical use Typical use Alloy 201 (UNS N02201) is a commercially pure wrought nickel, with good mechanical properties and an excellent resistance to many corrosives. Nickel 201 has low carbon (0.02% max) for applications over 315°C it is mainly used for food processing equipment, chemical shipping drums, caustic handling equipment and piping, electronic parts, aerospace and missile components, rocket motor cases, magnetostrictive devices. Weight Formula Average Wall: (OD-WT) x WT x 0,0280 = Kg/m (all sizes in mm) Minimum Wall: (OD-WT) x WT x 0,0291 = Kg/m (all sizes in mm) Technical Data Sheet Chemical Composition Limits Weight% Ni Cu Fe Mn C Si S Nickel Alloy 200 99.0 min 0.25 max 0.40 max 0.35 max 0.02 max 0.35 max 0.01 max Typical Mechanical Properties Material Tensile Strength Yield Strength (0.2% Offset) Elongation in 2" (%) Hardness ksi MPa ksi MPa Rockwell B Nickel 200 55-75 380-520 15-30 105-210 55-40 62 max Nominal Results for Cold Rolled, Annealed Rod and Bar. Availability Nickel 201 (UNS N02201) is available in Bar, Rods, Tube, Pipe, Plate, Sheet, Strip, Wire and Forging Stock. For further information please contact Sales. Services Every order is treated as carefully and timely as possible, and shipments are handled to ensure that all export procedures are followed correctly so that your order arrives in perfect condition as quickly as possible. Disclaimer Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.