EFR012 Electronic Hygrostat * Temperature and humidity adustable * Optical operating display (LED) * High switching capacity * Clip fixing The Electromechanical hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. The LED integrated in the adjustment knob on the active controller is lit when the connected device is in operation. Switch difference 5% RH(±1% RH tolerance) at 25 ℃ /77 ℉ (50% RH) Reaction Timer 5 sec. Contact type change-over contact (relay) Service life > 50 000 cycles Max. switching capacity(relay output) 240VAC,8(1.6)A/120VAC,8(1.6)A 100WDC at 24 VDC EMC acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Optical indicator LED Connection 5-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² Mounting clip for 35mm DIN rail, (EN50022) Casing UL94 V-0, light gray Dimensions 64.5 x 42 x 38mm Weight approx. 70g Fitting position vertical Operating/Storage temperature 0 to +60    ℃ ( +32~+140 ℉ )/ -20 to +70°C(-4~158 ℉ ) Operating/Storage humidity max. 90% RH (non-condensing) Protection type IP20 Art. No. Operating voltage Setting range Approval 01245.0-00 230VAC, 50/60HZ 40 to 90% RH CE 01246.0-00 230VAC, 50/60HZ 65% RH pre-set CE 01245.9-00 120VAC, 50/60HZ 40 to 90% RH CE 01246.9-00 120VAC, 50/60HZ 65% RH pre-set CE