FEITING PIPE ENGINEERING CO.,LTD

Our Video

Feiting is a professional manufacturer and supplier specialized in pipe fittings ,mainly made of stainless steel, low temperature steel, alloy steel, duplex steel, nickel base alloy and so on ,which are comprehensively used in projects in petrochemical industry, chemical industry, fertilizers, electric power plant, coal chemical industries, nuclear industry, town gas, and Oil & Gas industries. And we have the ability to provide professional package services for pipeline projects.

Hot Products

ASTM/ASME SB366
"Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings" Scope: wrought welding fittings for pressure piping, factory-made from nickel and nickel alloys, and threaded fittings Permissible Raw Materials Marking
ASTM A403/ASME SA403
ASTMA 403/A 403M: American Society for Testing and Materials Wrought Austenitic Stainless Steel Piping Fittings Scope: This specification covers wrought stainless steel fittings for pressure piping applications. Chemical Composition Identificati

Contacter: 温总
Tel: +86-510-83590332
Fax: +86-510-83594500
Email: Inquiry@feitingpipe.com
Company Address:
11F O-PARK, Huishan District, Wuxi, China

Products

ASTM/ASME SB366 "Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings" Scope: wrought welding fittings for pressure piping, factory-made from nickel and nickel alloys, and threaded fittings Permissible Raw Materials Marking Product and ASTM Designation Corrosion- Resistant Fittings ASME Pressure Fittings Alloy UNS Designation Heat TreatmentA ,B DEG °F [°C] Quench Pipe or Tube Plate, Sheet, or Strip Bar Forging and Forging Stock CRN WPN Ni N02200 1650-1700 [900 to 928] Rapid Air/Water B161 B162 B160, B564 CRNL WPNL Ni, Low C N02201 1650-1700 [900 to 928] Rapid Air/Water B161 B162 B160 CRNC WPNC Ni-Cu N04400 1650-1700 [900 to 928] Rapid Air/Water B165 B127 B164, B564 CR HX WPHX Ni-Cr-Mo-Fe N06002 2150 [1177] Rapid Air/Water B619/B619M, B622, B626 B435 B572 CR HG WPHG Ni-Cr-Fe-Mo-Cu N06007 2100-2150 [1150 to 1177] Rapid Air/Water B619/B619M, B622, B626 B582 B581 CRHC22 WPHC22 Low C-Ni-Mo-Cr N06022 2050 [1121] Rapid Air/Water B619/B619M, B622, B626 B575 B574, B564, B462, B472 CRV602 WPV602 Ni-Cr-Fe N06025 2200 [1204] Rapid Air/Water B163, B167 B168 B166, B462, B472 CRHG30 WPHC30 Ni-Cr-Fe-Mo-Cu N06030 2150 [1177] Rapid Air/Water B619/B619M, B622, B626 B582 B581, B462, B472 CRHG35 WPHC35 Ni-Cr-Mo N06035 2050 [1121] Rapid Air/Water B619/B619M, B622, B626 B575 B574, B564, B462, B472 CRV45TM WPV45TM Ni-Cr-Fe N06045 2150 [1177] Rapid Air/Water B163, B167 B168 B166, B462, B472 CR2120 WP2120 Ni-Cr-Mo low C N06058 2075 [1135] Rapid Air/Water B619/B619M, B622, B626 B575 B564, B574 CR5923 WP5923 Low C-Ni-Cr-Mo N06059 2050 [1121] Rapid Air/Water B619/B619M, B622, B626 B575 B564, B574, B462, B472 CR HC 2000 WPHC2000 Low C-Ni-Cr-Mo-Cu N06200 2075-2125 [1135-1163] Rapid Air/Water B619/B619M, B622, B626 B575 B564, B574, B462, B472 CRM21 WPM21 Low C-Ni-Cr-Mo-Ta N06210 Rapid Air/Water B619/B619M, B622, B626 B575 B564, B574 CRH230 WPH230 Ni-Cr-W-Mo N06230 2150-2250 [1177-1232] Rapid Air/Water B619/B619M, B622, B626 B435 B572, B564 CRHBC1 WPHBC1 Low C-Ni-Mo-Cr N10362 2100 [1147] Rapid Air/Water B619/B619M, B622, B626 B575 B574, B564, B462, B472 CR HC 4 WPHC4 Low C-Ni-Mo-Cr N06455 1950 [1065] Rapid Air/Water B619/B619M, B622, B626 B575 B574 CRNCI WPNCI Ni-Cr-Fe N06600 1800-1850 [983 to 1010] Rapid Air/Water B167, B516, B517 B168 B166, B564 CR603GT WP603GT Ni-Cr-Fe-Al N06603 2175 [1189] Rapid Air/Water B163, B167, B516, B517 B168 B166, B564 CRNCMC WPNCMC Ni-Cr-Mo-Cb N06625 GR.1 1600 [871]/GR.2 2000 [1093] Rapid Air/Water B444, B704, B705 B443 B446, B564 CRIN686 WPIN686 Low C-Ni-Cr-Mo N06686 2150 [1177] Rapid Air/Water B163, B619/B619M, B622, B626 B575 B564, B574, B462, B472 CR626Si WP626Si Ni-Cr-Mo-Si N06219 2050 [1121] Rapid Air/Water B444, B704, B705 B443 B446, B564 CR HG3 WPHG3 Ni-Cr-Fe-Mo-Cu N06985 2100-2150 [1147 to 1177] Rapid Air/Water B619/B619M, B622, B626 B582 B581 CR20CB WP20CB Cr-Ni-Fe-Mo-Cu-Cb stabilized N08020 1700-1850 [927 to 1010] Rapid Air/Water B464/B464M, B468, B729 B463 B472, B473, B462 CR3127 WP3127 Low C-Ni-Fe-Cr-Mo-Cu N08031 2175 [1189] Rapid Air/Water B619/B619M, B622, B626 B625 B564, B649, B462,B472 CRH120 WPH120 Ni-Cr-Fe N08120 2175-2225 [1189-1220] Rapid Air/Water B407, B514, B515 B409 B408, B564 CR330 WP330 Ni-Fe-Cr-Si N08330 1900 [1038] Rapid Air/Water B535, B710 B536 B511, B512 CR6XN WP6XN Fe-Ni-Cr-Mo-N N08367 2025 [1107] Rapid Air/Water B675, B676, B690 B688 B472, B564, B691, B462 CRNIC WPNIC Ni-Fe-Cr N08800 1800-1900 [983 to 1038] Rapid Air/Water B407, B514, B515 B409 B408, B564 CRNIC10 WPNIC10 Ni-Fe-Cr N08810 2100-2150 [1147 to 1177] Rapid Air/Water B407, B514, B515 B409 B408, B564 CRNIC11 WPNIC11 Ni-Fe-Cr N08811 2100-2150 [1147 to 1177] Rapid Air/Water B407 B409 B408, B564 CRNICMC WPNICMC Ni-Fe-Cr-Mo-Cu N08825 1700-1800 [930 to 983] Rapid Air/Water B423, B704, B705 B424 B425, B564 CR1925 WP1925 Low C-Ni-Fe-Cr-Mo-Cu N08925 1800-1900 [983 to 1038] Rapid Air/Water B673, B674, B677 B625 B649 CR1925N WP1925N Low C-Ni-Fe-Cr-Mo-Cu-N N08926 2150 [1177] Rapid Air/Water B673, B674, B677 B625 B649 CR HB WPHB Ni-Mo N10001 1950 [1065] Rapid Air/Water B619/B619M, B622, B626 B333 B335 CR HN WPHN Ni-Mo-Cr-Fe N10003 2150 [1177] Rapid Air/Water B619/B619M, B622, B626 B434 B573 CR H242 WPH242 Ni-Mo-Cr-Fe N10242 1925-2025 [1050-1105] Rapid Air/Water B619/B619M, B622, B626 B434 B573, B564 CR HC 276 WPHC276 Low C-Ni-Mo-Cr N10276 2050 [1121] Rapid Air/Water B619/B619M, B622, B626 B575 B574, B564, B462, B472 CRB10 WPB10 Low C-Ni-Mo-Cr-Fe N10624 2050 [1121] Rapid Air/Water B619/B619M, B622, B626 B333 B335, B564 CRVB4 WPVB4 Ni-Mo N10629 1975 [1080] Rapid Air/Water B619/B619M, B622, B626 B333 B335, B564, B462, B472 CR HB2 WPHB-2 Ni-Mo N10665 1950 [1065] Rapid Air/Water B619/B619M, B622, B626 B333 B335, B564, B462, B472 CR HB3 WPHB–3 Ni-Mo N10675 1950 [1065] Rapid Air/Water B619/B619M, B622, B626 B333 B335, B564, B462, B472 CRH160 WPH160 Ni-Co-Cr-Si N12160 2025 [1107] Rapid Air/Water B619/B619M, B622, B626 B435 B564, B572 CR3033 WP3033 Low C-Cr-Ni-Fe-N R20033 2050 [1121] Rapid Air/Water B619/B619M, B622, B626 B625 B564, B649, B472, B462 CRH556 WPH556 Ni-Fe-Cr-Co R30556 2150 [1177] Rapid Air/Water B619/B619M, B622, B626 B435 B572 Fitting Classes for WP Grades Class Construction Nondestructive Examination S Seamless None W Welded Radiography or Ultrasonic WX Welded Radiography WU Welded Ultrasonic Fittings or components produced inaccordance with this specification shall have sizes, shapes, and dimensions in accordance with those specified in ASME B16.9, ASME B16.11, MSS SP-43, MSS SP-95, MSS SP-97, ASME H34.1, ASME H34.2, or ASME H34.3.

ASTM A403/ASME SA403 ASTMA 403/A 403M: American Society for Testing and Materials Wrought Austenitic Stainless Steel Piping Fittings Scope: This specification covers wrought stainless steel fittings for pressure piping applications. Chemical Composition Identification Symbol Grade CR UNS Designation Composition, % Carbon Manganese Phosphorus Sulfur Silicon Nickel Chromium Molybdenum Titanium N2C Other Elements WP304 CR304 S30400 0.08 2 0.045 0.03 1 8.0±11.0 18.0±20.0 WP304H CR304L S30403 0.03 2 0.045 0.03 1 8.0±12.0 18.0±20.0 WP304L CR304H S30409 0.04±0.10 2 0.045 0.03 1 8.0±11.0 18.0±20.0 WP316 CR316 S31600 0.08 2 0.045 0.03 1 10.0±14.0 16.0±18.0 2.00±3.00 WP316L CR316L S31603 0.03 2 0.045 0.03 1 10.0±14.0 16.0±18.0 2.00±3.00 WP321 CR321 S32100 0.08 2 0.045 0.03 1 9.0±12.0 17.0±19.0 WP321H CR321H S32109 0.04±0.10 2 0.045 0.03 1 9.0±12.0 17.0±19.0 WP347 CR347 S34700 0.08 2 0.045 0.03 1 9.0±12.0 17.0±19.0 WP347H CR347H S34709 0.04±0.10 2 0.045 0.03 1 9.0±12.0 17.0±19.0 Mechanical Properties All WP and CR Grades Tensile Strength, min, ksi [MPa] Yield Strength, min, ksi [MPa] 304, 304LN, 304H, 309,310, 316, 316LN, 316H,317, 317L, 321, 321H,347, 347H, 348, 348H 75 [515] 30 [205] S31725 304L, 316L 70 [485] 25 [170] 304N, 316N, S31726 80 [550] 35 [240] XM-19 100 [690] 55 [380] S31254 94 [650] to 119 [820] 44 [300] S33228 73 [500] 27 [185] S34565 115 [795] 60 [415] Elongation Requirements Standard round specimen, or small proportional specimen, or strip-type specimen, minimum % in 4D Longitudinal Transverse 28 20 Fitting Classes for WP Grades Class Construction Nondestructive Examination S Seamless None W Welded Radiography or Ultrasonic WX Welded Radiography WU Welded Ultrasonic 1.1 This specification covers wrought stainless steel fittings for pressure piping applications. 1.2 Several grades of austenitic stainless steel alloys are included in this specification Grades are designated with a prefix, WP or CR, based on the applicable ASME or MSS dimensional and rating standards, respectively. 1.3 For each of the WP stainless grades, several classes of fittings are covered, to indicate whether seamless or welded construction was utilized. Class designations are also utilized to indicate the nondestructive test method and extent of nondestructive examination (NDE). Table 1 is a general summary of the fitting classes applicable to all WP grades of stainless steel covered by this specification. There are no classes for the CR grades. specification requirements are covered elsewhere.

ASTM/ASME SA350,LF2 ASTMA A 350/A 350M: American Society for Testing and Materials Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components Scope: This specification2 covers several grades of carbon and low-alloy steel forged or ring-rolled ¯anges, forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing. Chemical Composition Element Composition, wt. % Grade LF1 Grade LF2 Grade LF3 Grade LF5 Grade LF6 Grade LF9 Grade LF787 Carbon, max 0.3 0.3 0.2 0.3 0.22 0.2 0.07 Manganese 0.60±1.35 0.60±1.35 0.90 max 0.60±1.35 1.15±1.50 0.40±1.06 0.40±0.70 Phosphorus,max 0.035 0.035 0.035 0.035 0.025 0.035 0.025 Sulfur, max 0.04 0.04 0.04 0.04 0.025 0.04 0.025 Silicon 0.15±0.30 0.15±0.30 0.20±0.35 0.20±0.35 0.15±0.30 0.40 max Nickel 0.40 max 0.40 max 3.3±3.7 1.0±2.0 0.40 max 1.60±2.24 0.70±1.00 Chromium 0.30 max 0.30 max 0.30 max 0.30 max 0.30 maxB,C 0.30 max 0.60±0.90 Molybdenum 0.12 max 0.12 max 0.12 max 0.12 max 0.12 maxB,C 0.12 max 0.15±0.25 Copper 0.40 max 0.40 max 0.40 max 0.40 max 0.40 max 0.75±1.25 1.00±1.30 Columbium 0.02 max 0.02 max 0.02 max 0.02 max 0.02 max 0.02 max 0.02 min Vanadium 0.08 max 0.08 max 0.03 max 0.03 max 0.04±0.11 0.03 max 0.03 max Nitrogen 0.01±0.030 Mechanical Properties Grades LF1 and LF5 LF2 LF3 LF6 LF9 LF787 Class 1 Classes 1 and 2 Classes 1 and 2 Class 2 Class 3 LF5 Class 1 Classes 2 and 3 Tensile strength, ksi [MPa] 60±85 70±95 70±95 66±91 75±100 63±88 65±85 75±95 [415±585] [485±655] [485±655] [455±630] [515±690] [435±605] [450±585] [515±655] Yield strength, min, ksi [MPa] 30 [205] 36 [250] 37.5 [260] 52 [360] 60 [415] 46 [315] 55 [380] 65 [450] Elongation: Standard round specimen, or small proportional specimen, min % in 4D gage length 25 22 22 22 20 25 20 20 Strip specimen for wall thickness 5¤16 in. [7.94 mm] and over and for all small sizes tested in full section; min % in 2 in. [50 mm] 28 30 30 30 28 28 28 28 Equation for calculating min elongation for strip specimens thinner than 5¤16 in. [7.94 mm]; min % in 2 in. [50 mm] t = actual thickness in inches 48t + 13 48t + 15 48t + 15 48t + 15 48t + 13 48t + 13 48t + 13 48t + 13 Reduction of area, min, % 38 30 35 40 40 38 45 45 1.1This specification 2 covers several grades of carbon and low-alloy steel forged or ring-rolled ¯anges, forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing. They are made to specified dimensions, or to dimensional standards, such as the ASME and API specifications referenced in Section 2. Although this specification covers some piping components machined from rolled bar and seamless tubular materials (see 5.3.3), it does not cover raw material produced in these product forms. 1.2No limitation on size is intended beyond the ability of the manufacturer to obtain the specified requirements. How-ever, Class 3 of Grade LF787 is only available in the quenched-and-precipitation heat treated condition. 1.3Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified by the purchaser in the order.

ASTM/ASME SA234A234M,WPB,WPC ASTM A234/A234M: American Society for Testing and Materials Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service Scope: These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. Chemical Composition Grade and Marking Symbol Composition, % Carbon Manganese Phosphorus Sulfur Silicon Columbium Molybdenum Nickel Copper Others WPB 0.30 0.29–1.06 0.05 0.06 0.10 min 0.40 0.15 max 0.40 0.40 Vanadium 0.08 WPC 0.35 0.29–1.06 0.05 0.06 0.10 min 0.40 0.15 max 0.40 0.40 Vanadium 0.08 WP1 0.28 0.30–0.90 0.05 0.05 0.10–0.50 . . . 0.44–0.65 . . . . . . . . . WP12 CL1, 0.05–0.20 0.30–0.80 0.05 0.05 0.60 0.80–1.25 0.44–0.65 . . . . . . . . . WP12 CL2 . . . WP11 CL1 0.05–0.15 0.30–0.60 0.03 0.03 0.50–1.00 1.00–1.50 0.44–0.65 . . . . . . . . . WP11 CL2, 0.05–0.20 0.30–0.80 0.04 0.04 0.50–1.00 1.00–1.50 0.44–0.65 . . . . . . . . . WP11 CL3 . . . WP22 CL1, 0.05–0.15 0.30–0.60 0.04 0.04 0.50 1.90–2.60 0.87–1.13 . . . . . . . . . WP22 CL3 . . . WP24 0.05–0.10 0.30–0.70 0.02 0.01 0.15–0.45 2.20–2.60 0.90–1.10 . . . 0.75–1.25 Aluminum 0.020 Boron 0.0015–0.0070 Nitrogen 0.12 Titanium 0.06–0.10 Vanadium 0.20–0.30 WP5 CL1, 0.15 0.30–0.60 0.04 0.03 0.50 4.0–6.0 0.44–0.65 . . . . . . . . . WP5 CL3 . . . WP9 CL1, 0.15 0.30–0.60 0.03 0.03 1.00 8.0–10.0 0.90–1.10 . . . . . . . . . WP9 CL3 WPR 0.20 0.40–1.06 0.05 0.05 . . . . . . . . . 1.60–2.24 0.75–1.25 . . . WP91 0.08–0.12 0.30–0.60 0.02 0.01 0.20–0.50 8.0–9.5 0.85–1.05 0.40 . . . Vanadium 0.18–0.25 Columbium 0.06–0.10 Nitrogen 0.03–0.07 Aluminum 0.02F Titanium 0.01F Zirconium 0.01F WP911 0.09–0.13 0.30–0.60 0.02 0.01 0.10–0.50 8.5–9.5 0.90–1.10 0.40 . . . Vanadium 0.18–0.25 Columbium 0.060–0.10 Nitrogen 0.04–0.09 Aluminum 0.02 maxF Boron 0.0003–0.006 Tungsten 0.90–1.10 Titanium 0.01 maxF Zirconium 0.01 maxF WP92 0.07–0.13 0.30–0.60 0.02 0.01 0.50 8.50–9.50 0.30–0.60 0.40 . . . Aluminum 0.02F Boron 0.001–0.006 Columbium 0.04–0.09 Nitrogen 0.030–0.070 Titanium 0.01 Tungsten 1.50–2.00 Vanadium 0.15–0.25 Zirconium 0.01 Mechanical Properties Grade and Marking Symbol WPB WPC, WP11 CL2, WP12 CL2 WP1 WP11 CL1, WP22 CL1, WP5 CL1, WP9 CL1 WPR WP11 CL3, WP22 CL3, WP5 CL3, WP9 CL3 WP24 WP91 WP92 WP911 WP12 CL1 Tensile strength, minimum unless a range is given ksi [MPa] 60 [415] 70 [485] 55–80 60 [415] 63–88 75 [520] 85 [585] 90 [620] 90–120 60 [415] [380–550] [435–605] [620–840] Yield strength, min, ksi [MPa] (0.2 % offset or 0.5 % extension-under-load) 35 [240] 40 [275] 30 [205] 30 [205] 46 [315] 45 [310] 60 [415] 60 [415] 64 [440] 32 [220] Elongation Requirements Grades All Grades except WPR, WP91, and WP911 WPR and WP24 WP91 WP92 WP911 Longi-tudinal Trans-verse Longi-tudinal Trans-verse Longi-tudinal Trans-verse Elongation: Standard round specimen, or small proportional specimen, min % in 4 D 22.00 14.00 20.00 20.00 13.00 Rectangular specimen for wall thickness 5⁄16 in. [7.94 mm] and over, and for all small sizes tested in full section; min % in 2 in. [50 mm] 30.00 20.00 28.00 Rectangular specimen for wall thickness less than 5⁄16 in. [7.94 mm]; min % in 2 in. [50 mm] (1⁄2-in. [12.7-mm] wide specimen) B B B A WPB and WPC fittings manufactured from plate shall have a minimum elongation of 17 %. B For each 1⁄32 in. [0.79 mm] decrease in wall thickness below 5⁄16 in. [7.94 mm], a deduction of 1.5 % for longitudinal and 1.0 % for transverse from the values shown above is permitted. The following table gives the minimum value for various wall thicknesses. Wall Thickness Grades All Grades except WPR, WP91 and WP911 WPR WP91, WP92, and WP911 in. [mm] Longitudinal Transverse Longitudinal Longitudinal 5⁄16 (0.31) 7.94 30.00 20.00 28.00 20.00 9⁄32 (0.28) 7.14 28.50 19.00 26.50 19.00 1⁄4 (0.25) 6.35 27.00 18.00 25.00 18.00 7⁄32 (0.22) 5.56 25.50 23.50 17.00 3⁄16 (0.19) 4.76 24.00 22.00 16.00 5⁄32 (0.16) 3.97 22.50 20.50 15.00 1⁄8 (0.13) 3.17 21.00 19.00 14.00 3⁄32 (0.09) 2.38 19.50 17.50 13.00 1⁄16 (0.06) 1.59 18.00 16.00 12.00 1.1This specification2 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. Fittings differ-ing from these ASME and MSS standards shall be furnished in accordance with Supplementary Requirement S58 of Specifi-cation A960/A960M. 1.2Optional supplementary requirements are provided for fittings where a greater degree of examination is desired. When desired, one or more of these supplementary requirements may be specified in the order. 1.3This specification does not cover cast welding fittings or fittings machined from castings. Cast steel welding fittings are governed by Specifications A216/A216M and A217/A217M.